BS ISO 8196-1-2009 Milk - Definition and evaluation of the overall accuracy of alternative methods of milk analysis - Analytical attributes of alternative methods《牛乳 牛乳分析变.pdf

《BS ISO 8196-1-2009 Milk - Definition and evaluation of the overall accuracy of alternative methods of milk analysis - Analytical attributes of alternative methods《牛乳 牛乳分析变.pdf》由会员分享，可在线阅读，更多相关《BS ISO 8196-1-2009 Milk - Definition and evaluation of the overall accuracy of alternative methods of milk analysis - Analytical attributes of alternative methods《牛乳 牛乳分析变.pdf（24页珍藏版）》请在麦多课文档分享上搜索。

1、BS ISO 8196-1:2009 ICS 67.100.10 NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAW BRITISH STANDARD Milk Definition and evaluation of the overall accuracy of alternative methods of milk analysis Part 1: Analytical attributes of alternative methodsThis British Standard was publis

2、hed under the authority of the Standards Policy and Strategy Committee on 30 November 2009. BSI 2009 ISBN 978 0 580 58447 3 Amendments/corrigenda issued since publication Date Comments BS ISO 8196-1:2009 National foreword This British Standard is the UK implementation of ISO 8196-1:2009. The UK part

3、icipation in its preparation was entrusted to Technical Committee AW/5, Chemical analysis of milk and milk products. A list of organizations represented on this committee can be obtained on request to its secretary. This publication does not purport to include all the necessary provisions of a contr

4、act. Users are responsible for its correct application. Compliance with a British Standard cannot confer immunity from legal obligations.BS ISO 8196-1:2009Reference numbers ISO 8196-1:2009(E) IDF 128-1:2009(E) ISO and IDF 2009INTERNATIONAL STANDARD ISO 8196-1 IDF 128-1 Second edition 2009-10-01 Milk

5、 Definition and evaluation of the overall accuracy of alternative methods of milk analysis Part 1: Analytical attributes of alternative methods Lait Dfinition et valuation de la prcision globale des mthodes alternatives danalyse du lait Partie 1: Attributs analytiques des mthodes alternatives BS ISO

6、 8196-1:2009 ISO 8196-1:2009(E) IDF 128-1:2009(E) PDF disclaimer This PDF file may contain embedded typefaces. In accordance with Adobes licensing policy, this file may be printed or viewed but shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer

7、performing the editing. In downloading this file, parties accept therein the responsibility of not infringing Adobes licensing policy. Neither the ISO Central Secretariat nor the IDF accepts any liability in this area. Adobe is a trademark of Adobe Systems Incorporated. Details of the software produ

8、cts used to create this PDF file can be found in the General Info relative to the file; the PDF-creation parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies and IDF national committees. In the unlikely event that a proble

9、m relating to it is found, please inform the ISO Central Secretariat at the address given below. COPYRIGHT PROTECTED DOCUMENT ISO and IDF 2009 All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechani

10、cal, including photocopying and microfilm, without permission in writing from either ISO or IDF at the respective address below. ISO copyright office International Dairy Federation Case postale 56 CH-1211 Geneva 20 Diamant Building Boulevard Auguste Reyers 80 B-1030 Brussels Tel. + 41 22 749 01 11 T

11、el. + 32 2 733 98 88 Fax + 41 22 749 09 47 Fax + 32 2 733 04 13 E-mail copyrightiso.org E-mail infofil-idf.org Web www.iso.org Web www.fil-idf.org Published in Switzerland ii ISO and IDF 2009 All rights reservedBS ISO 8196-1:2009 ISO 8196-1:2009(E) IDF 128-1:2009(E) ISO and IDF 2009 All rights reser

12、ved iiiContents Page Foreword iv Foreword .v Introductionvi 1 Scope1 2 Normative references1 3 Terms and definitions .1 3.1 General terms and definitions1 3.2 Terms and definitions on precision.2 3.3 Terms and definitions on accuracy .3 3.4 Other analytical characteristics .3 4 Explanation of the de

13、finitions 4 4.1 Accuracy.4 4.2 Precision.5 4.3 Trueness.6 5 Assessment of precision and accuracy7 5.1 General .7 5.2 Precision: Interlaboratory trial .7 5.3 Accuracy.9 Annex A (normative) Illustration of the various criteria involved in the overall accuracy of an alternative method.12 Bibliography13

14、 BS ISO 8196-1:2009 ISO 8196-1:2009(E) IDF 128-1:2009(E) iv ISO and IDF 2009 All rights reservedForeword ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carr

15、ied out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.

16、ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2. The main task of technical committees is to prepare Internat

17、ional Standards. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote. Attention is drawn to the possibility that some of the e

18、lements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. ISO 8196-1|IDF 128-1 was prepared by Technical Committee ISO/TC 34, Food products, Subcommittee SC 5, Milk and milk products, and the International Dairy Fed

19、eration (IDF). It is being published jointly by ISO and IDF. This second edition of ISO 8196-1|IDF 128-1 cancels and replaces the first edition (ISO 8196-1:2000) which has been technically revised. ISO 8196|IDF 128 consists of the following parts, under the general title Milk Definition and evaluati

20、on of the overall accuracy of alternative methods of milk analysis: Part 1: Analytical attributes of alternative methods Part 2: Calibration and quality control in the dairy laboratory Part 3: Protocol for the evaluation and validation of alternative quantitative methods of milk analysis BS ISO 8196

21、-1:2009 ISO 8196-1:2009(E) IDF 128-1:2009(E) ISO and IDF 2009 All rights reserved vForeword IDF (the International Dairy Federation) is a non-profit organization representing the dairy sector worldwide. IDF membership comprises National Committees in every member country as well as regional dairy as

22、sociations having signed a formal agreement on cooperation with IDF. All members of IDF have the right to be represented at the IDF Standing Committees carrying out the technical work. IDF collaborates with ISO in the development of standard methods of analysis and sampling for milk and milk product

23、s. The main task of Standing Committees is to prepare International Standards. Draft International Standards adopted by the Action Teams and Standing Committees are circulated to the National Committees for voting. Publication as an International Standard requires approval by at least 50 % of IDF Na

24、tional Committees casting a vote. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. IDF shall not be held responsible for identifying any or all such patent rights. ISO 8196-1|IDF 128-1 was prepared by the International Dairy Federa

25、tion (IDF) and Technical Committee ISO/TC 34, Food products, Subcommittee SC 5, Milk and milk products. It is being published jointly by ISO and IDF. All work was carried out by the Joint IDF-ISO Action Team on Automated methods of the Standing Committee on Quality assurance, statistics of analytica

26、l data and sampling under the aegis of its project leader, Mr. O. Leray (FR). This edition of ISO 8196-1|IDF 128-1, together with ISO 8196-2|IDF 128-2 and ISO 8196-3|IDF 128-3, cancels and replaces IDF 128:1985, which has been technically revised. ISO 8196|IDF 128 consists of the following parts, un

27、der the general title Milk Definition and evaluation of the overall accuracy of alternative methods of milk analysis: Part 1: Analytical attributes of alternative methods Part 2: Calibration and quality control in the dairy laboratory Part 3: Protocol for the evaluation and validation of alternative

28、 quantitative methods of milk analysis BS ISO 8196-1:2009 ISO 8196-1:2009(E) IDF 128-1:2009(E) vi ISO and IDF 2009 All rights reservedIntroduction The main purpose of this part of ISO 8196|IDF 128 is to provide definitions of the relevant performance characteristics for quantitatively evaluating the

29、 overall accuracy of an analytical method, through the application of proper experimental designs and recommended statistical procedures. Performance characteristics of an analytical method can be defined as a set of quantitative and experimentally determined values, or criteria, of fundamental impo

30、rtance in assessing the suitability of a method for any given purpose. The general concepts apply to all analytical methods, but special emphasis is given to rapid physico- chemical methods which are currently in use for compositional testing of milk. In analytical methods where measurements result

31、from combinations of multiple output signals of measurement channels either in series or in parallel (e.g. methods in which multivariate mathematical models are applied), the process of combining the primary raw information is considered as a full part of the method itself. For the purpose of ISO 81

32、96|IDF 128 (all parts), this process is considered as a closed device (“black box”). As such, this process is assumed to be optimized prior to the assessments and evaluations done within the scope of ISO 8196|IDF 128 (all parts). ISO 8196-2|IDF 128-2 provides practical details and recommendations fo

33、r the calibration of instruments and quality control in routine dairy laboratories including checking compliance with a specification value or limit. ISO 8196-3|IDF 128-3 is intended to complement this part of ISO 8196|IDF 128 as an alternative to the evaluation of new methods to which this part of

34、ISO 8196|IDF 128 cannot apply, e.g. when the organization of interlaboratory studies is hampered by the number of new instruments available, which is too small for such a protocol. While this part of ISO 8196|IDF 128 and ISO 8196-3|IDF 128-3 are mainly intended for experts to assess new methods of a

35、nalysis, ISO 8196-2|IDF 128-2 aims to be a guide for routine laboratories using these methods. ISO 8196|IDF 128 (all parts) only specifies the single linear regression model as a simplified approach to allow users to determine equivalence of an alternative method with a reference method. However, th

36、e linear regression approach is valid as a determination of method equivalence only in limited circumstances or if a high correlation between the results of the reference method and the routine method is achieved. If a high correlation is not achieved, recourse should be made to other data handling

37、and measurement error modelling techniques. Although these techniques are referred to, they are not specified in ISO 8196|IDF 128 (all parts). BS ISO 8196-1:2009 INTERNATIONAL STANDARD ISO 8196-1:2009(E) IDF 128-1:2009(E) ISO and IDF 2009 All rights reserved 1Milk Definition and evaluation of the ov

38、erall accuracy of alternative methods of milk analysis Part 1: Analytical attributes of alternative methods 1 Scope This part of ISO 8196|IDF 128 specifies various performance characteristics that constitute and serve to characterize the overall accuracy of an analytical method. It furthermore estab

39、lishes general principles for the design of experiments and gives guidelines for the procedures to be used to evaluate these characteristics quantitatively. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only th

40、e edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. ISO 3534 (all parts), Statistics Vocabulary and symbols ISO 5725 (all parts), Accuracy (trueness and precision) of measurement methods and results 3 Terms and definition

41、s For the purposes of this part of ISO 8196|IDF 128, the terms and definitions given in ISO 3534 (all parts) and ISO 5725-1 apply, together with the following. 3.1 General terms and definitions 3.1.1 true quantity value true value of a quantity true value quantity value consistent with the definitio

42、n of a quantity NOTE 1 In the Error Approach to describing measurement, a true quantity value is considered unique and, in practice, unknowable. The Uncertainty Approach is to recognize that, owing to the inherently incomplete amount of detail in the definition of a quantity, there is not a single t

43、rue quantity value but rather a set of true quantity values consistent with the definition. However, this set of values is, in principle and in practice, unknowable. Other approaches dispense altogether with the concept of true quantity value and rely on the concept of metrological compatibility of

44、measurement results for assessing their validity. NOTE 2 In the special case of a fundamental constant, the quantity is considered to have a single true quantity value. BS ISO 8196-1:2009 ISO 8196-1:2009(E) IDF 128-1:2009(E) 2 ISO and IDF 2009 All rights reservedNOTE 3 When the definitional uncertai

45、nty associated with the measurand is considered to be negligible compared to the other components of the measurement uncertainty, the measurand may be considered to have an “essentially unique” true quantity value. This is the approach taken by ISO/IEC Guide 98-3:2008 3and associated documents, wher

46、e the word “true” is considered to be redundant. ISO/IEC Guide 99:2007 4 , 2.11 3.1.2 reference method anchor method method of analysis internationally recognized by experts or by agreement between the parties NOTE 1 Adapted from ISO 21187|IDF 196:2004 1 , 3.2. NOTE 2 A reference method gives the “t

47、rue value” or “assigned value” of the quantity of the measurand. 3.1.3 alternative method routine method method of analysis allowing quantification of the status of a test sample NOTE 1 Adapted from ISO 21187|IDF 196:2004 1 , 3.1. NOTE 2 An alternative method demonstrates or estimates, for a given c

48、ategory of products, the same measurand as determined using the corresponding reference method (3.1.2). NOTE 3 The alternative method can be either an indirect method i.e. one not measuring directly the component or the characteristic that it is intended to quantify, but instead one or more quantiti

49、es or properties which are functionally linked to that component or a direct method. It can have specific adaptations for user convenience (e.g. speed, automation, miniaturization, cost) that can introduce deviation into the analytical process (e.g. incomplete component or characteristic measurement) and thus prevent direct estimation and give different accuracy. 3.2 Terms and definitions on precision 3.2.1 precision closeness of agreement between independent test/measurement results obtained under s