BS ISO 8140-2009 Pneumatic fluid power - Cylinders 1000 kPa (10 bar) series - Mounting dimensions of rod-end clevises《气动液压传动 1000 kPa(10 bar)系列气瓶 杆端装置的安装尺寸规格》.pdf
《BS ISO 8140-2009 Pneumatic fluid power - Cylinders 1000 kPa (10 bar) series - Mounting dimensions of rod-end clevises《气动液压传动 1000 kPa(10 bar)系列气瓶 杆端装置的安装尺寸规格》.pdf》由会员分享,可在线阅读,更多相关《BS ISO 8140-2009 Pneumatic fluid power - Cylinders 1000 kPa (10 bar) series - Mounting dimensions of rod-end clevises《气动液压传动 1000 kPa(10 bar)系列气瓶 杆端装置的安装尺寸规格》.pdf(14页珍藏版)》请在麦多课文档分享上搜索。
1、BS ISO 8140:2009 ICS 23.100.20 NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAW BRITISH STANDARD Pneumatic fluid power Cylinders, 1 000 kPa (10 bar) series Mounting dimensions of rod-end clevisesThis British Standard was published under the authority of the Standards Policy and
2、 Strategy Committee on 30 June 2009. BSI 2009 ISBN 978 0 580 63560 1 Amendments/corrigenda issued since publication Date Comments BS ISO 8140:2009 National foreword This British Standard is the UK implementation of ISO 8140:2009. It supersedes BS ISO 8140:1991 which is withdrawn. The UK participatio
3、n in its preparation was entrusted to Technical Committee MCE/18/-/3, Cylinders. A list of organizations represented on this committee can be obtained on request to its secretary. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its c
4、orrect application. Compliance with a British Standard cannot confer immunity from legal obligations.BS ISO 8140:2009Reference number ISO 8140:2009(E) ISO 2009INTERNATIONAL STANDARD ISO 8140 Third edition 2009-04-01 Pneumatic fluid power Cylinders, 1 000 kPa (10 bar) series Mounting dimensions of ro
5、d-end clevises Transmissions pneumatiques Vrins, srie 1 000 kPa (10 bar) Dimensions dinterchangeabilit des chapes dextrmit de tige BS ISO 8140:2009 ISO 8140:2009(E) PDF disclaimer This PDF file may contain embedded typefaces. In accordance with Adobes licensing policy, this file may be printed or vi
6、ewed but shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In downloading this file, parties accept therein the responsibility of not infringing Adobes licensing policy. The ISO Central Secretariat accepts no liability i
7、n this area. Adobe is a trademark of Adobe Systems Incorporated. Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation parameters were optimized for printing. Every care has been taken to ensure that the file is suitable
8、 for use by ISO member bodies. In the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below. COPYRIGHT PROTECTED DOCUMENT ISO 2009 All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utili
9、zed in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or ISOs member body in the country of the requester. ISO copyright office Case postale 56 CH-1211 Geneva 20 Tel. + 41 22 749 01 11 Fax +
10、 41 22 749 09 47 E-mail copyrightiso.org Web www.iso.org Published in Switzerland ii ISO 2009 All rights reservedBS ISO 8140:2009 ISO 8140:2009(E) ISO 2009 All rights reserved iii Foreword ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies
11、 (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations,
12、governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. International Standards are drafted in accordance with the rules given in the ISO/
13、IEC Directives, Part 2. The main task of technical committees is to prepare International Standards. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the me
14、mber bodies casting a vote. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. ISO 8140 was prepared by Technical Committee ISO/TC 131, Fluid power syst
15、ems, Subcommittee SC 3, Cylinders. This third edition cancels and replaces the second edition (ISO 8140:1991), which has been technically revised. BS ISO 8140:2009 ISO 8140:2009(E) iv ISO 2009 All rights reservedIntroduction In pneumatic fluid power systems, power is transmitted and controlled throu
16、gh a gas under pressure within a circuit. One component of such systems is the pneumatic fluid power cylinder. This is a device that converts power into linear mechanical force and motion. It consists of a movable element, i.e. a piston and piston rod, operating within a cylindrical bore. BS ISO 814
17、0:2009 INTERNATIONAL STANDARD ISO 8140:2009(E) ISO 2009 All rights reserved 1 Pneumatic fluid power Cylinders, 1 000 kPa (10 bar) series Mounting dimensions of rod-end clevises 1 Scope This International Standard specifies the mounting dimensions required for interchangeability of rod-end clevises o
18、f pneumatic cylinders. The rod-end clevises have been designed specifically for use with 1 000 kPa 10 bar 1) series cylinders manufactured in accordance with ISO 6430, ISO 6432 and ISO 15552, but this does not limit their application. The clevises are used on piston rods of pneumatic cylinders for m
19、echanically transmitting the cylinder force. The design of the clevises is based on the maximum forces resulting from the specified internal diameter of the cylinders and pressure according to ISO 6430, ISO 6432 and ISO 15552. 2 Normative references The following referenced documents are indispensab
20、le for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. ISO 5598, Fluid power systems and components Vocabulary ISO 6099, Fluid power systems and component
- 1.请仔细阅读文档,确保文档完整性,对于不预览、不比对内容而直接下载带来的问题本站不予受理。
- 2.下载的文档,不会出现我们的网址水印。
- 3、该文档所得收入(下载+内容+预览)归上传者、原创作者;如果您是本文档原作者,请点此认领!既往收益都归您。
下载文档到电脑,查找使用更方便
5000 积分 0人已下载
下载 | 加入VIP,交流精品资源 |
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- BSISO81402009PNEUMATICFLUIDPOWERCYLINDERS1000KPA10BARSERIESMOUNTINGDIMENSIONSOFRODENDCLEVISES 气动液压 传动

链接地址:http://www.mydoc123.com/p-395779.html