BS ISO 8068-2006 en_2868 Lubricants industrial oils and related products (class L) - Family T (turbines) - Specification for lubricating oils for turbines《润滑剂、工业润滑油和相关产品(L类)T族(涡轮).涡轮机用润滑油规范 》.pdf

《BS ISO 8068-2006 en_2868 Lubricants industrial oils and related products (class L) - Family T (turbines) - Specification for lubricating oils for turbines《润滑剂、工业润滑油和相关产品(L类)T族(涡轮).涡轮机用润滑油规范 》.pdf》由会员分享，可在线阅读，更多相关《BS ISO 8068-2006 en_2868 Lubricants industrial oils and related products (class L) - Family T (turbines) - Specification for lubricating oils for turbines《润滑剂、工业润滑油和相关产品(L类)T族(涡轮).涡轮机用润滑油规范 》.pdf（26页珍藏版）》请在麦多课文档分享上搜索。

1、BRITISH STANDARD BS ISO 8068:2006 Lubricants, industrial oils and related products (class L) Family T (Turbines) Specification for lubricating oils for turbines ICS 75.100 BS ISO 8068:2006 This British Standard was published under the authority of the Standards Policy and Strategy Committee on 29 De

2、cember 2006 BSI 2006 ISBN 0 580 49884 0 National foreword This British Standard was published by BSI. It is the UK implementation of ISO 8068:2006. The UK participation in its preparation was entrusted to Technical Committee PTI/7, Lubricants and process fluids. A list of organizations represented o

3、n PTI/7 can be obtained on request to its secretary. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance with a British Standard cannot confer immunity from legal obligations. Amendments issued since p

4、ublication Amd. No. Date Comments Reference number ISO 8068:2006(E)INTERNATIONAL STANDARD ISO 8068 Second edition 2006-09-15 Lubricants, industrial oils and related products (class L) Family T (Turbines) Specification for lubricating oils for turbines Lubrifiants, huiles industrielles et produits co

5、nnexes (classe L) Famille T (Turbines) Spcifications pour les huiles lubrifiantes pour turbines BS ISO 8068:2006ii iii Contents Page Foreword iv Introduction v 1 Scope . 1 2 Normative references . 1 3 Sampling 4 4 Requirements for turbine oils 4 5 Specification tables 5 Bibliography . 16 BS ISO 8068

6、:2006iv Foreword IISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for

7、which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on al

8、l matters of electrotechnical standardization. International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2. The main task of technical committees is to prepare International Standards. Draft International Standards adopted by the technical committees are

9、circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held res

10、ponsible for identifying any or all such patent rights. ISO 8068 was prepared by Technical Committee ISO/TC 28, Petroleum products and lubricants, Subcommittee SC 4, Classifications and specifications. This second edition cancels and replaces the first edition (ISO 8068:1987), which has been technic

11、ally revised. ISO 8068:1987 is only dealing with the specifications of TSA and TGA categories of turbine oils. This new edition gives specifications for all the turbine oil categories described in ISO 6743-5:2006. BS ISO 8068:2006v Introduction New turbine technologies have emerged in recent years l

12、eading to the changes in lubricant requirements. For example, the development of single shaft combined cycle turbines has resulted in the use of a common lubrication system for both the gas and steam turbine. The lubricant should therefore meet the requirements for the lubrication of both pieces of

13、equipment. The growing concern regarding the environmental behaviour of lubricants is also leading to the use of biodegradable products when there are risks of leakage into soil or surface water. This is particularly the case with hydraulic power plants and lubricants in this application should demo

14、nstrate a low ecotoxicity. BS ISO 8068:2006blank1 Lubricants, industrial oils and related products (class L) Family T (Turbines) Specification for lubricating oils for turbines WARNING The handling and use of products as specified in this International Standard can be hazardous, if suitable precauti

15、ons are not observed. This International Standard does not purport to address all of the safety problems associated with its use. It is the responsibility of the users of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prio

16、r to use. 1 Scope This International Standard specifies the minimum requirements for turbine lubricants, as delivered. It specifies the requirements for a wide variety of turbines for power generation, including steam turbines, gas turbines, combined-cycle turbines with a common lubrication system a

17、nd hydraulic (water driven) turbines. This International Standard does not specify the requirements for wind turbines, which are dealt with in ISO 12925-1 4 . Whilst power generation is the primary application for turbines, steam and gas turbines can also be used to drive rotating equipment, such as

18、 pumps and compressors. The lubrication systems of these driven loads can be common to that of the turbine. Turbine installations incorporate complex auxiliary systems requiring lubrication, including hydraulic systems, gearboxes and couplings. Depending upon the design and configuration of the turb

19、ine and driven equipment, turbine lubricants can also be used in these auxiliary systems. This International Standard should be read in conjunction with ISO 6743-5 2 , the classification of different turbine lubricant types. The following lubricants are considered in this International Standard: min

20、eral oils; synthetic lubricants, ester and polyalphaolefin types intended for high-temperature gas turbines; synthetic lubricants, ester and polyalphaolefin types, environmentally acceptable for use in hydraulic turbines; fire-resistant phosphate-ester type lubricants. NOTE For the purposes of this

21、International Standard, the term “% (m/m)” is used to represent the mass fraction. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the

22、 referenced document (including any amendments) applies. BS ISO 8068:20062 ISO 760, Determination of water Karl Fischer method (General method) ISO 2049, Petroleum products Determination of colour (ASTM scale) ISO 2160, Petroleum products Corrosiveness to copper Copper strip test ISO 2592, Determina

23、tion of flash and fire points Cleveland open cup method ISO 2719, Determination of flash point Pensky-Martens closed cup method ISO 2909, Petroleum products Calculation of viscosity index from kinematic viscosity. ISO 3016, Petroleum products Determination of pour point ISO 3104, Petroleum product T

24、ransparent and opaque liquids Determination of kinematic viscosity and calculation of dynamic viscosity ISO 3170, Petroleum liquids Manual sampling ISO 3448, Industrial liquid lubricants ISO viscosity classification ISO 3675, Crude petroleum and liquid petroleum products Laboratory determination of

25、density Hydrometer method ISO 4259, Petroleum products Determination and application of precision data in relation to methods of test ISO 4263-1, Petroleum and related products Determination of the ageing behaviour of inhibited oils and fluids TOST test Part 1: Procedure for mineral oils ISO 4263-3,

26、 Petroleum and related products Determination of the ageing behaviour of inhibited oils and fluids TOST test Part 3: Anhydrous procedure for synthetic hydraulic fluids ISO 4406, Hydraulic fluid power Fluids Method for coding the level of contamination by solid particles ISO 6072, Hydraulic fluid pow

27、er Compatibility between fluids and standard elastomeric materials ISO 6247, Petroleum products Determination of foaming characteristics of lubricating oils ISO 6296, Petroleum products Determination of water Potentiometric Karl Fischer titration method ISO 6341, Water quality Determination of the i

28、nhibition of the mobility of Daphnia magna Straus (Cladocera, Crustacea) Acute toxicity test ISO 6614, Petroleum products Determination of water separability of petroleum oils and synthetic fluids ISO 6618, Petroleum products and lubricants Determination of acid or base number Colour-indicator titra

29、tion method ISO 6619, Petroleum products and lubricants Neutralization number Potentiometric titration method ISO 7120, Petroleum products and lubricants Petroleum oils and other fluids Determination of rust- preventing characteristics in the presence of water ISO 7346-2, Water quality Determination

30、 of the acute lethal toxicity of substances to a freshwater fish Brachydanio rerio Hamilton-Buchanan (Teleostei, Cyprinidae) Part 2: Semi-static method ISO 7537, Petroleum products Determination of acid number Semi-micro colour-indicator titration method BS ISO 8068:20063 ISO 7624, Petroleum product

31、s and lubricants Inhibited mineral turbine oils Determination of oxidation stability ISO 8192, Water quality Test for inhibition of oxygen consumption by activated sludge for carbonaceous and ammonium oxidation ISO 9120, Petroleum and related products Determination of air-release properties of steam

32、 turbine and other oils Impinger method ISO 9439, Water quality Evaluation of ultimate aerobic biodegradability of organic compounds in aqueous medium Carbon dioxide evolution test ISO 12185, Crude petroleum and petroleum products Determination of density Oscillating U-tube method ISO 12937, Petrole

33、um products Determination of water Coulometric Karl Fischer titration method ISO 13357-1, Petroleum products Determination of the filterability of lubricating oils Part 1: Procedure for oils in the presence of water ISO 13357-2, Petroleum products Determination of the filterability of lubricating oi

34、ls Part 2: Procedure for dry oils ISO 14593, Water quality Evaluation of ultimate aerobic biodegradability of organic compounds in aqueous medium Method by analysis of inorganic carbon in sealed vessels (CO 2headspace test) ISO 14635-1, Gears FZG test procedures Part 1: FZG test method A/8,3/90 for

35、relative scuffing load-carrying capacity of oils ISO 14935, Petroleum and related products Determination of wick flame persistence of fire-resistant fluids ISO 20764, Petroleum and related products Preparation of a test portion of high-boiling liquids for the determination of water content Nitrogen

36、purge method ISO 20823, Petroleum and related products Determination of the flammability characteristics of fluids in contact with hot surfaces Manifold ignition test ASTM D2272-02, Standard Test Method for Oxidation Stability of Steam Turbine Oils by Rotating Pressure Vessel ASTM D 2711-01a, Standa

37、rd Test Method for Demulsibility Characteristics of Lubricating Oils ASTM D 2893, Standard Test Method for Oxidation Characteristics of Extreme-Pressure Lubrication Oils ASTM D 4636, Standard Test Method for Corrosiveness and Oxidation Stability of Hydraulic Oils, Aircraft Turbine Engine Lubricants,

38、 and Other Highly Refined Oils ASTM D 6081, Standard Practice for Aquatic Toxicity Testing of Lubricants: Sample Preparation and Results Interpretation EN 14832, Petroleum and related products Determination of the oxidation stability and corrosivity of fire-resistant phosphate ester fluids EN 14833,

39、 Petroleum and related products Determination of hydrolytic stability of fire-resistant phosphate ester fluids DIN 51554-3, Testing of mineral oils Test of susceptibility to ageing according to Baader Testing at 95 C BS ISO 8068:20064 3 Sampling Unless otherwise specified in commodity specifications

40、, samples shall be drawn in accordance with ISO 3170. 4 Requirements for turbine oils Fluids, when tested under the prescribed methods, shall be in accordance with the limits set out in Tables 3 to 11, depending on the type. The appearance of the delivered oils shall be clear and bright and free of

41、any visible particulate matter, under visible light at ambient temperature. These oils shall not contain any viscosity-index improver. Most of the test methods specified in the tables contain a precision statement. In cases of dispute, the procedure described in ISO 4259 shall apply. Water content i

42、s specified using ISO 760, ISO 6296, ISO 12937 or ISO 20764. In case of dispute, ISO 20764 shall be used. The elastomer compatibility index shall be determined according to ISO 6072 under the conditions listed in Table 1, according to the product category. Table 2 gives guidelines on acceptable chan

43、ges of properties. Other elastomers and other limits may be used or specified by the end user depending on the purpose and conditions of actual use. In addition, the turbine oil shall be compatible with all material constituents of the lubricating system. Table 1 Test conditions according to ISO 607

44、2 for the determination of the elastomer compatibility index Fluid Symbol (ISO 6743-5 2 ) Suitable elastomer Test temperature 1 C Examples of test duration a 2 h NBR 1,2 100 HNBR 1 130 Mineral oils TSA, TGA, TSE, TGE, TGB, TGSB, TGF, TGSE, THA, THE FKM 2 150 168 1 000 NBR 1,2 60 HNBR 1 100 Synthetic

45、 esters TGCE THCE FKM 2 100 168 1 000 NBR 1,2 100 HNBR 1 130 Synthetic hydrocarbons TGCH THCH FKM 2 150 168 1 000 FKM 2 150 Aryl phosphate ester TSD TGD EPDM 1 130 168 1 000 aThe test duration of 1 000 h is recommended for evaluation of elastomer compatibility with fluids which cause longer term cha

46、nges to the elastomer. BS ISO 8068:20065 Table 2 Guidelines on acceptable changes of properties, according to ISO 6072 Immersion time h Maximum volume swell % Maximum volume shrinkage % Hardness change IRHD Maximum tensile stress change % Maximum elongation change % 168 15 4 8 20 20 1 000 20 5 10 50

47、 50 5 Specification tables 5.1 Specification for TSA and TGA turbine oils These lubricants are mineral oils with suitable antioxidants and corrosion inhibitors, for the lubrication of steam turbines and gas turbines (normal service). Specifications are given in Table 3. 5.2 Specification for TSE and

48、 TGE turbine oils These lubricants are TSA and TGA types turbine oils, with additional extreme-pressure performance to lubricate gear systems. Specifications are given in Table 4. 5.3 Specification for TGB and TGSB turbine oils These lubricants are mineral oils or synthetic-base stocks with suitable

49、 antioxidants and corrosion inhibitors. These oils shall withstand higher temperatures and exhibit higher thermal stability than TSA and TGA oil types. The TGSB type shall fulfil the requirements of both TSA and TGB oils. Specifications are given in Table 5. 5.4 Specification for TGF and TGSE turbine oils These