BS ISO 6707-3-2017 en_6921 Buildings and civil engineering works Vocabulary Sustainability terms《建筑和土木工程.词汇.可持续性》.pdf

《BS ISO 6707-3-2017 en_6921 Buildings and civil engineering works Vocabulary Sustainability terms《建筑和土木工程.词汇.可持续性》.pdf》由会员分享，可在线阅读，更多相关《BS ISO 6707-3-2017 en_6921 Buildings and civil engineering works Vocabulary Sustainability terms《建筑和土木工程.词汇.可持续性》.pdf（46页珍藏版）》请在麦多课文档分享上搜索。

1、Buildings and civil engineering works Vocabulary Part 3: Sustainability terms BS ISO 67073:2017 BSI Standards Publication WB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06 ISO 2017 Buildings and civil engineering works Vocabulary Part 3: Sustainability terms Batiments et ouvrages de genie civ

2、il Vocabulaire Partie 3: Termes relatifs a la durabilite INTERNATIONAL STANDARD ISO 6707-3 First edition 2017-08 Reference number ISO 6707-3:2017(E) National foreword This British Standard is the UK implementation of ISO 67073:2017. The UK participation in its preparation was entrusted to Technical

3、Committee CB/101/ /2, Basic Data Terminology. A list of organizations represented on this committee can be obtained on request to its secretary. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. The British Sta

4、ndards Institution 2017 Published by BSI Standards Limited 2017 ISBN 978 0 580 87865 7 ICS 01.040.91; 91.010.20 Compliance with a British Standard cannot confer immunity from legal obligations. This British Standard was published under the authority of the Standards Policy and Strategy Committee on

5、30 September 2017. Amendments/corrigenda issued since publication Date Text affected BRITISH STANDARD BS ISO 67073:2017 ISO 2017 Buildings and civil engineering works Vocabulary Part 3: Sustainability terms Batiments et ouvrages de genie civil Vocabulaire Partie 3: Termes relatifs a la durabilite IN

6、TERNATIONAL STANDARD ISO 6707-3 First edition 2017-08 Reference number ISO 6707-3:2017(E) BS ISO 67073:2017 ISO 6707-3:2017(E)ii ISO 2017 All rights reserved COPYRIGHT PROTECTED DOCUMENT ISO 2017, Published in Switzerland All rights reserved. Unless otherwise specified, no part of this publication m

7、ay be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below or ISOs member body in the country of th

8、e requester. ISO copyright office Ch. de Blandonnet 8 CP 401 CH-1214 Vernier, Geneva, Switzerland Tel. +41 22 749 01 11 Fax +41 22 749 09 47 copyrightiso.org www.iso.org BS ISO 67073:2017 ISO 6707-3:2017(E)ii ISO 2017 All rights reserved COPYRIGHT PROTECTED DOCUMENT ISO 2017, Published in Switzerlan

9、d All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior written permission. Permission can be request

10、ed from either ISO at the address below or ISOs member body in the country of the requester. ISO copyright office Ch. de Blandonnet 8 CP 401 CH-1214 Vernier, Geneva, Switzerland Tel. +41 22 749 01 11 Fax +41 22 749 09 47 copyrightiso.org www.iso.orgISO 6707-3:2017(E)Foreword iv Introduction v 1 Scop

11、e . 1 2 Normative references 1 3 T erms and definitions . 1 3.1 Base terms. 1 3.2 Entities . 2 3.3 Products, components 3 3.4 Activities, processes, methods, persons 5 3.5 Resources . 9 3.6 Conditions, phenomena13 3.7 Properties: Ability, performance, indicators, requirements, measures 17 Bibliograp

12、hy .24 Alphabetical index .26 ISO 2017 All rights reserved iii Contents Page BS ISO 67073:2017 ISO 6707-3:2017(E) Foreword ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standard

13、s is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take

14、part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. The procedures used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, Part 1. In part

15、icular the different approval criteria needed for the different types of ISO documents should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, Part 2 (see www .iso .org/ directives). Attention is drawn to the possibility that some of the elements

16、of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of any patent rights identified during the development of the document will be in the Introduction and/or on the ISO list of patent declarations received (se

17、e www .iso .org/ patents). Any trade name used in this document is information given for the convenience of users and does not constitute an endorsement. For an explanation on the voluntary nature of standards, the meaning of ISO specific terms and expressions related to conformity assessment, as we

18、ll as information about ISOs adherence to the World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT) see the following URL: www .iso .org/ iso/ foreword .html. This document was prepared by Technical Committee ISO/TC 59, Buildings and civil engineering works, Subcommittee

19、 SC 2, Terminology and harmonization of languages. A list of all parts in the ISO 6707 series can be found on the ISO website.iv ISO 2017 All rights reserved BS ISO 67073:2017 ISO 6707-3:2017(E) Foreword ISO (the International Organization for Standardization) is a worldwide federation of national s

20、tandards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International

21、organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. The procedures used to develop this document and those intended for

22、 its further maintenance are described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the different types of ISO documents should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, Part 2 (see www .iso .o

23、rg/ directives). Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of any patent rights identified during the development of the document will

24、be in the Introduction and/or on the ISO list of patent declarations received (see www .iso .org/ patents). Any trade name used in this document is information given for the convenience of users and does not constitute an endorsement. For an explanation on the voluntary nature of standards, the mean

25、ing of ISO specific terms and expressions related to conformity assessment, as well as information about ISOs adherence to the World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT) see the following URL: www .iso .org/ iso/ foreword .html. This document was prepared by T

26、echnical Committee ISO/TC 59, Buildings and civil engineering works, Subcommittee SC 2, Terminology and harmonization of languages. A list of all parts in the ISO 6707 series can be found on the ISO website.iv ISO 2017 All rights reserved ISO 6707-3:2017(E) Introduction With the growth in the number

27、 of international construction projects and the development of the international market in construction products, there is an increasing need for agreement on a common language. ISO 6707-1 defines general terms related to buildings and civil engineering works. This document establishes preferred ter

28、ms and concepts related to sustainability for buildings and other types of construction works. Communication is important to the implementation and operation of the concept of sustainable development related to building and civil engineering. In the interest of common understanding and standardizati

29、on, consistent word usage is encouraged to help eliminate the major barrier to effective technical communication. The preparation of this document was undertaken under the administrative direction of ISO/TC 59/SC 2, but the development work was undertaken by a joint working group of ISO/TC 59/SC 2 a

30、nd ISO/TC 59/SC 17. This document presents a mix of terms and definitions, some of which are repeated from other ISO publications, while others are those that have been derived from ISO standards on environmental management and environmental life cycle assessment. Derivations have been performed car

31、efully in order to maintain the original intention, but to enable interpretation to the context of sustainability and sustainable development related to buildings and civil engineering works. This document does not contain a complete list of terms of relevance to the thematic field, but focuses on c

32、oncepts that have been standardized and/or applied through publication of individual standards within ISO/TC 59/SC 17 and on terms and definitions of concepts frequently encountered in the literature related to sustainability in buildings and other types of construction works. Attention has been pai

33、d to how the terms selected have been used in ISO standards and European standards so as to maintain the original intention. ISO/TR 21932 was one of the principle sources employed. Although informative in nature, it contains terms and definitions of concepts that have been applied and standardized i

34、n the documents developed to date under ISO/TC 59/SC 17, as well as other terms and definitions that constitute work in progress within SC 17 or established within CEN/TC 350 (given in Annexes B and C). A related vocabulary on terms under ISO/TC 268: ISO 37102 is expected to focus on concepts that h

35、ave been standardized and/or applied through publications within ISO/TC 268. This document is intended to be used in conjunction with ISO 6707-1. ISO 2017 All rights reserved v BS ISO 67073:2017 Buildings and civil engineering works Vocabulary Part 3: Sustainability terms 1 Scope This document estab

36、lishes preferred terms and definitions for concepts applicable to sustainability and sustainable development related to buildings and civil engineering works. NOTE It focuses on concepts that have been standardized and/or applied through publication of individual International Standards within ISO/T

37、C 59/SC 17 and on terms and definitions of concepts frequently encountered in the literature of buildings and other types of construction works that relate to sustainable development. 2 Normative references The following documents are referred to in the text in such a way that some or all of their c

38、ontent constitutes requirements of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. ISO 6707-1, Buildings and civil engineering works Vocabulary Part 1: General terms 3 T erm

39、s an d definiti ons For the purposes of this document, the terms and definitions given in ISO 6707-1 and the following apply. ISO and IEC maintain terminological databases for use in standardization at the following addresses: IEC Electropedia: available at h t t p :/ www .electropedia .org/ ISO Onl

40、ine browsing platform: available at h t t p :/ www .iso .org/ obp NOTE Where terms in definitions are defined in this document, the relevant terms are in italics, and the term number is given after the relevant term. Where terms in definitions are defined in ISO 6707-1, the terms are also in italics

41、 but no term number is given. 3.1 Base terms 3.1.1 sustainable development development that meets the environmental, social and economic needs of the present without compromising the ability of future generations to meet their own needs SOURCE: ISO Guide 82:2014, 3.2, modified Note 1 to entry has be

42、en removed. 3.1.2 sustainability state of the global system, including environmental, social and economic aspects in which the needs of the present are met without compromising the ability of future generations to meet their own needs Note 1 to entry: The environmental, social and economic aspects i

43、nteract and are interdependent and are often referred to as the three dimensions of sustainability. Note 2 to entry: Sustainability is the goal of sustainable development (3.1.1). INTERNATIONAL ST ANDARD ISO 6707-3:2017(E) ISO 2017 All rights reserved 1 BS ISO 67073:2017 Buildings and civil engineer

44、ing works Vocabulary Part 3: Sustainability terms 1 Scope This document establishes preferred terms and definitions for concepts applicable to sustainability and sustainable development related to buildings and civil engineering works. NOTE It focuses on concepts that have been standardized and/or a

45、pplied through publication of individual International Standards within ISO/TC 59/SC 17 and on terms and definitions of concepts frequently encountered in the literature of buildings and other types of construction works that relate to sustainable development. 2 Normative references The following do

46、cuments are referred to in the text in such a way that some or all of their content constitutes requirements of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. ISO 6707-1, B

47、uildings and civil engineering works Vocabulary Part 1: General terms 3 T erms an d definiti ons For the purposes of this document, the terms and definitions given in ISO 6707-1 and the following apply. ISO and IEC maintain terminological databases for use in standardization at the following address

48、es: IEC Electropedia: available at h t t p :/ www .electropedia .org/ ISO Online browsing platform: available at h t t p :/ www .iso .org/ obp NOTE Where terms in definitions are defined in this document, the relevant terms are in italics, and the term number is given after the relevant term. Where

49、terms in definitions are defined in ISO 6707-1, the terms are also in italics but no term number is given. 3.1 Base terms 3.1.1 sustainable development development that meets the environmental, social and economic needs of the present without compromising the ability of future generations to meet their own needs SOURCE: ISO Guide 82:2014, 3.2, modified Note 1 to entry has been removed. 3.1.2 sustainability state of the global system, including environmental, social and economic aspect