QJ 1762.7-1989 橡胶模具标准结构 四板式矩形橡胶压模.pdf

《QJ 1762.7-1989 橡胶模具标准结构 四板式矩形橡胶压模.pdf》由会员分享，可在线阅读，更多相关《QJ 1762.7-1989 橡胶模具标准结构 四板式矩形橡胶压模.pdf（3页珍藏版）》请在麦多课文档分享上搜索。

1、中华人民共和国航天工业部部标准QJ 1762.7 -89 橡胶模具标准结构囚板式短形橡胶压模1主题内窑与适用范固本标准规定了四板式矩形橡跤压模结构.本标准适用于一个分模面矩形橡胶压模.2引用标准QJ 1769橡胶模具技术条件3结构与尺寸A-枫2 4 7 内可莓楠Y，气。L 航天工业部1989-03-08批准1989-10-01实施15 。MJaHJl回咀mm 主要尺寸L上垫板2.导柱3螺钉4.上模植5下固定额6导柱7于柄8下垫板QJ 17面.2-89IQJ 1767.2-891 GB 65-85 QJ 1764.5-89IQJ 1765.4-891 QJ 1767.2-89IQJ 17目2-8

2、9QJ 1766.4-89 数量L B E l 1 8 1 l l 8 1 规楠46 1x80x15 1x80xlS 10x28 1田x80x81x80x8 56 100x回x201x80x却10x38 1 80 70 1x80x25 1xx25 10x48 1x80x 10 1x皿x10M8x18 80 100x回x301x80x30 8x28 M8x22 12Ox1x15 46 1却xl00x1512Ox1x8 8x38 M8x25 1却x1x856 1却x1x却1皿x1x却1却1 8x48 M8x 3O 12Ox1x15 12Ox1x15 12x28 70 120x1x10 120xlx

3、30 12x38 1却xl00xl080 12Ox1x30 46 14Ox1却x15140叫到x1512x48 1咽xl20x81咽x1却x81咽1却56 14Ox1却x20140xl却x却70 1咽x12Ox1014O x12O x15 140xl却x2514O x12O x10 50 1曲时x10M10x 18 1曲x1x151曲x1x151曲x100x101 曲M10x22 1曲x1x却1曲x1x2074 1曲xlx12 M10x25 1曲x1x15l曲x100x25 1曲x100x 12 到1曲x120x10IOx28 1曲x120x 15 1曲x120x 15 1回x120x 10

4、1 1却曲10x38 1曲x120x20 1曲xl20x2074 1曲x12Ox12l曲x1却x15l曲xl20x2514x28 1曲x120x 12 IOx咽1曲xl40xlS14x38 50 1曲x14Ox101曲x140x 15 14x48 1曲x140x 10 1咽曲l曲xl40x201曲xl40x2074 1x14Ox12 1曲x14Ox151曲xl40x251曲x14Ox1250 1朋x1却x15 180 x 120x 15 120 曲1舶xl20xl0180x120x20 M8x39A 180xl20x lO M12x 18 180x120x20 180 74 180x 120x

5、 12 M12x22 180x 120x25 180x120x25 180x120x12 50 180x 140x 10 M12x25 180x14O x15 180x14O x15 180xl40xl0 140 M8x49A 64 180x 140x 12 J_180xI4Ox20 1 180x14O x20 180xl40x12 -、自1m主要尺寸1.上垫板2导柱3螺钉4上模植主下固定板6导柱7于柄8下垫板QJ 1166.2-89 IQJ 1161.2-891 GB 65-85 QJ 171剧5-891QJ1765.4-891 QJ 1767.2-89IQJ l7困2-891QJ11盹4-

6、89数量L B H l 1 8 l 1 1 8 1 规梅H 2OO x14O x12 Z皿x140x 15 2OO x14O x15 200x140x12 140 2OO xI4O x20 2OOxl40x却M8x49A 曲直到Oxl40xl4200xl咽x14200 12x28 M12x 18 16x28 54 2OOx1回x12 2OOx1曲x15 2OOx1曲x152OOx1曲x121曲12x38 M12x22 2OOx1曲x2016x38 M8x59A 曲2OOx1曲x14 2OOx1曲x却2OOx1曲x14H 22Ox1曲xUM12x25 22Ox1x 15 22Ox1曲x152皿xl60x12220 1曲Z却x1曲x20M10x59A 剧2却x1曲x1422Ox1剧x202皿x1曲x14表续。MJEH-41曲唱标记示倒L= 180mm, B= 120mm, H=mm的矩形橡跤压模，其标记为压模180x120 xQI1762.8-89， 4 技术要求技术条件按Q11769，5 附加说明:本标准曲航天工业部七O八所提出.本标准由航天工业部一一九厂、五一九厂、七O八所负责起草.H 、J