【计算机类职业资格】微软认证70-215-试卷3及答案解析.doc

《【计算机类职业资格】微软认证70-215-试卷3及答案解析.doc》由会员分享，可在线阅读，更多相关《【计算机类职业资格】微软认证70-215-试卷3及答案解析.doc（8页珍藏版）》请在麦多课文档分享上搜索。

1、微软认证 70-215-试卷 3及答案解析(总分：18.00，做题时间：90 分钟)一、单选题(总题数：7，分数：14.00)1.Ezonexam has 50 offices. The employees in these offices have limited knowledge of Windows 2000. Each office has a network of between five and 20 client computers. The office networks are connected to each other. The company is buying 5

2、0 identical computers to run Windows 2000 Server in these offices. The server must be installed to the companys standard configuration. You use Setup Manager to create a network shared distribution folder and a Unattend.txt file that specifies the companys standard configuration.You want to automate

3、 the installation process as much as possible, in the least possible amount of time.What should you do?（分数：2.00）A.Run Makebt32.exe to create four installation startup disks and add the Unattend.txt file to the first disk. Instruct an employee at each office to start the installation by using these d

4、isks.B.Create a Microsoft MS-DOS network boot disk that makes a connection to the network shared distribution folder and runs the winnt command with the /s and /u switches. Instruct an employee at each office to start the installation by using this disk.C.Create a floppy disk that contains only the

5、Unattend.txt file. Instruct an employee at each office to start the installation by using the Windows 2000 Server compact disc, with the floppy disk inserted.D.Create a Windows 2000 folder on a hard disk. Copy the Windows 2000 Server compact disc to the folder. Add the Unattend.txt file to the folde

6、r. Copy the folder to a writeable CD. Instruct an employee at each office to start the installation by suing this CD.2.You are the network administrator responsible for testing and deploying new service packs for Windows 2000. Your forest has two trees, with four domains in each tree, as shown in th

7、e exhibit.For the testing of each service pack, you plan to deploy the service pack to the support.IS domain and the support.IS domain, but to no other domains. You plan to use a Group Policy to configure and administer the service pack package. You need to minimize the complexity and administration

8、 of the service pack package, and to minimize network traffic between the domains.You create a Microsoft Windows Installer package for the service pack. What should you do to configure the Group Policy? （分数：2.00）A.Configure the Windows Installer package in a Group Policy for the and domainsB.Confi

9、gure the Windows Installer package in a Group Policy for the support.IS and support.IS domains.C.Configure two sites, with one tree in each site. Configure the Windows Installer package in a Group Policy for each site.D.Configure one site that contains both trees. Configure the Windows Installer pac

10、kage in a Group Policy for the site.3.The company is buying 50 identical computers to run Windows 2000 Server in these offices. These servers must be installed to the companys standard configuration. You create a setup information file (SIF) that specifies the companys standard configuration.You wan

11、t to automate the installation process as much as possible in the least possible amount of time.What should you do?（分数：2.00）A.Use Makebt32.exe to create four installation startup disks and add the SIF to the first disk. Instruct an employee at each office to start the installation by using these dis

12、ks.B.Create an MS-DOS boot disk that contains CD ROM drivers and the SIF and that runs the Winnt/S: D:/i386 command. Instruct an employee at each office to start the installation by using this disk.C.Create a floppy disk that contains only the SIF. Instruct an employee at each office to start the in

13、stallation by using the Windows 2000 Server CD-ROM, with the floppy disk inserted.D.Create a Windows 2000 folder on a hard disk. Copy the Windows 2000 Server CD-ROM to the folder. Add the SIF to the folder. Copy the folder to a writable CD. Instruct an employee at each office to start the installati

14、on by using this CD.4.You are the administrator of a Windows NT Server 4.0 computer names Ezonexam1.Ezonexam1 is a backup domain controller in Es Windows 2000 Active Directory domain. Ezonexam1 contains five hard disks. Disks 0 and 1 are configured as a Windows NT 4.0 mirror set and contain the oper

15、ating system files. There are 300 MB of disk space remaining on the Windows NT 4.0 mirror set. Disk 2, 3, and 4 are configured as a Windows NT 4.0 stripe set with parity and contain employee data files. The Windows NT 4.0 stripe set with parity has a maximum capacity of 140 GB and currently has 15 G

16、B free. Ezonexam1 runs an application that is used by all of Es employees.A new version of the application is available. The new version requires Windows 2000 Server. The application will not run on a domain controller.You need to install the new application on Ezonexam1 as quickly as possible.What

17、should you do first?（分数：2.00）A.Install Windows 2000 Server on Ezonexam1. Configure Ezonexam1 to use a dual boot configuration that includes Windows NT Server 4.0 and Windows 2000 Server.B.On a second Windows 2000 Server computer, run the sysprep utility to create a cloned server image. Use this imag

18、e to upgrade Ezonexam1.C.Upgrade Ezonexam1 to be a Windows 2000 member server. After the upgrade, run the dcpromo utility on Ezonexam1.D.Upgrade Ezonexam1 to Windows 2000 Server. During the upgrade, select the option to make Ezonexam1 a member server.5.You are an administrator of Es network. You wan

19、t to perform routine upgrades on your Windows 2000 Server computer. You use your non-administrator user account in the domain to logon to the server.You want to upgrade all of the critical system files and patches on the server in the shortest possible time.What should you do?（分数：2.00）A.Use Windows

20、Update.B.Run System File Checker.C.Log on as administrator and run Windows Update.D.Log on as administrator and run System File Checker.6.Your network uses TCP/IP as the only network protocol. Devices on the network are configured to use IP addresses from the private 10.0.0.0 range. All the client c

21、omputers on the network use Windows 2000 Professional. The network includes Windows 2000 Servers and UNIX Servers.Users print jobs are sent to shared printers on a Windows 2000 Server computer named PrintServ that directs the print jobs to the print devices attached directly to the network.You have

22、a high-capacity print device that is attached to one of the UNIX Servers. The UNIX computer uses the LPR printing protocol, and its IP address is 10.1.1.99. The name of the printer queue is GIANT.You want users to be able to connect to this printer from their computers.What should you do?（分数：2.00）A.

23、Install Microsoft Print Services for UNIX on PrintServ. Create a network printer on the users computers, and specify that the printer URL is LPR:/10.1.1.99/GIANT.B.Install Microsoft Print Services for UNIX on the users computers. Create a network printer on the users computers, and specify that the

24、printer URL is LPR:/10.1.1.99/GIANT.C.Create a network printer on PrintServ and specify that the printer name is /10.1.1.99/GIANT. Share this printer and connect to it from the users computers.D.Create a local printer on PrintServ. Create a new TCP/IP port for an LPR server at address 10.1.1.99 with

25、 a queue name of GIANT. Share this printer and connect it from the users computers.7.Es network consists of Windows 2000 Professional and UNIX client computers. You install a Windows 2000 Server computer on the network. All computers that are connected to the network use TCP/IP as their only network

26、 protocol.Several laser print devices are attached to the UNIX computers. You want to enable the Windows 2000 Professional computers to print to these printers. You want to make the minimum number of configuration changes necessary to achieve this goal.What should you do?（分数：2.00）A.Install Simple TC

27、P/IP services on the Windows 2000 Server computer. Configure printers on the Windows 2000 Server computer to print to the print device attached to the UNIX computers.B.Install Print Services for UNIX on the Windows 2000 Server computer. Configure shared printers on the Windows 2000 Server computer.

28、Configure the UNIX computers to print to these shared printers.C.Disconnect the print devices from the UNIX computers and connect them to the Windows 2000 Server computer. Share the printers, and configure the Windows 2000 Professional computers and the UNIX computers to print to the shared printers

29、.D.On the Windows 2000 Server computer, configure shared printers that connect to the print devices attached to the UNIX computers. Configure the Windows 2000 Professional computers to print to the shared printers on the Windows 2000 Server computer.二、多选题(总题数：2，分数：4.00)8.You are the network administ

30、rator for Ezonexam.You are planning to upgrade Windows NT Server 4.0 computers to Windows 2000 Server. You want to perform the upgrades by means of a distribution folder. You need to install a custom application as part of the upgrade.You need to include the commands necessary so that the custom app

31、lication is installed as part of the upgrade process.What should you do? (Each correct answer presents part of the solution. Choose two)（分数：2.00）A.Create a command file named Unattend.txt to install the application.B.Create a command file named Cmdlines.txt to install the application.C.Copy the comm

32、and file to the /$OEM/$C/ subfolder under the i386 folder.D.Copy the command file to the subfolder named /$OEM$ under the i386 folder.E.Copy the command file to the subfolder named /$OEM$/textmode under the i386 folder.9.You are the network administrator for Ezonexam. You are preparing to install Wi

33、ndows 2000 Server on a new computer. The computer is connected to a network that includes Windows 98 computers and Windows 2000 Server computers.You want to install Windows 2000 Server from source files that are located on a shared folder called I386 on a Windows 2000 Server computer named Ezonexam1

34、.What should you do? (Each correct answer presents part of the solution. Choose two)（分数：2.00）A.On a Windows 2000 computer, use Makebt32.exe to create installation startup disks. Start the new computer by using the first disk.B.On a Windows 2000 computer, format a floppy disk. Copy NTLDR, Boot.ini, N

35、, and Ntbootdd.sys to this disk. Start the new computer by using the disk.C.Start the new computer by using a Windows 98 network boot disk.D.Connect to /Ezonexam1/I386 and run Winnt32.exe.E.Connect to /Ezonexam1/I386 and run Winnt.exe.微软认证 70-215-试卷 3答案解析(总分：18.00，做题时间：90 分钟)一、单选题(总题数：7，分数：14.00)1.E

36、zonexam has 50 offices. The employees in these offices have limited knowledge of Windows 2000. Each office has a network of between five and 20 client computers. The office networks are connected to each other. The company is buying 50 identical computers to run Windows 2000 Server in these offices.

37、 The server must be installed to the companys standard configuration. You use Setup Manager to create a network shared distribution folder and a Unattend.txt file that specifies the companys standard configuration.You want to automate the installation process as much as possible, in the least possib

38、le amount of time.What should you do?（分数：2.00）A.Run Makebt32.exe to create four installation startup disks and add the Unattend.txt file to the first disk. Instruct an employee at each office to start the installation by using these disks.B.Create a Microsoft MS-DOS network boot disk that makes a co

39、nnection to the network shared distribution folder and runs the winnt command with the /s and /u switches. Instruct an employee at each office to start the installation by using this disk. C.Create a floppy disk that contains only the Unattend.txt file. Instruct an employee at each office to start t

40、he installation by using the Windows 2000 Server compact disc, with the floppy disk inserted.D.Create a Windows 2000 folder on a hard disk. Copy the Windows 2000 Server compact disc to the folder. Add the Unattend.txt file to the folder. Copy the folder to a writeable CD. Instruct an employee at eac

41、h office to start the installation by suing this CD.解析：解析：Explanation: Winnt and not winnt32 as the boot disks operate in DOS mode and works with 16-bit applications. The /s:path switch specifies the location of the installation files for Windows 2000 Server. The /u:file switch specifies the locatio

42、n of the answer file for unattended installations and the number of seconds to wait between copying the files and restarting the computer. Since the employees have limited knowledge insofar as Windows 2000 is concerned, it would be best to make use of the winnt command-line with the abovementioned s

43、witches. Incorrect answers: A: This option presupposes that the employees who will be tasked with the installation have a sound knowledge of Windows 2000. C, D: This option would be problematic since the employees have limited knowledge when it comes to Windows 2000.2.You are the network administrat

44、or responsible for testing and deploying new service packs for Windows 2000. Your forest has two trees, with four domains in each tree, as shown in the exhibit.For the testing of each service pack, you plan to deploy the service pack to the support.IS domain and the support.IS domain, but to no othe

45、r domains. You plan to use a Group Policy to configure and administer the service pack package. You need to minimize the complexity and administration of the service pack package, and to minimize network traffic between the domains.You create a Microsoft Windows Installer package for the service pac

46、k. What should you do to configure the Group Policy? （分数：2.00）A.Configure the Windows Installer package in a Group Policy for the and domainsB.Configure the Windows Installer package in a Group Policy for the support.IS and support.IS domains. C.Configure two sites, with one tree in each site. Con

47、figure the Windows Installer package in a Group Policy for each site.D.Configure one site that contains both trees. Configure the Windows Installer package in a Group Policy for the site.解析：解析：Explanation: In this scenario we must create a new group policy and apply the installer package to it. We m

48、ust then link the Group Policy to the two domains support.IS and support.IS. Incorrect answers: A: The Group Policy should be applied to the local domains. C: We apply the Group Policy to the domain, not to OUs. D: The Group Policy should be applied to both the support.IS domain and support.IS domai

49、n.3.The company is buying 50 identical computers to run Windows 2000 Server in these offices. These servers must be installed to the companys standard configuration. You create a setup information file (SIF) that specifies the companys standard configuration.You want to automate the installation process as much as possible in the