【计算机类职业资格】微软认证70-215-试卷2及答案解析.doc

《【计算机类职业资格】微软认证70-215-试卷2及答案解析.doc》由会员分享，可在线阅读，更多相关《【计算机类职业资格】微软认证70-215-试卷2及答案解析.doc（8页珍藏版）》请在麦多课文档分享上搜索。

1、微软认证 70-215-试卷 2 及答案解析(总分：14.00，做题时间：90 分钟)一、单选题(总题数：6，分数：12.00)1.You are the administrator of a network that consists of a single Windows NT 4.0 domain. The network contains five Windows NT Server domain controllers and 1,000 Windows NT Workstation client computers.You want to install Windows 2000

2、Server on a new computer. You want the new computer to act as domain controller in the existing domain.What should you do?（分数：2.00）A.On the new computer, install Windows NT Server 4.0 and designate the computer as a BDC in the existing domain. Promote the computer to the PDC of the domain. Upgrade t

3、he computer to Windows 2000 Server.B.On the new computer, install Windows NT Server 4.0 and designate the computer as a PDC in a new domain that has the same NetBIOS name as the existing Windows NT domain. Upgrade the computer to Windows 2000 Server. Use the Active Directory sites and services to fo

4、rce synchronization of the domain controllers.C.Shut down the PDC of the existing Windows NT domain from the network. On the new computer, install Windows 2000 Server, and then run the Active Directory installation wizard to install Active Directory, specifying the same NetBIOS name for the Windows

5、2000 domain as the existing Windows NT domain. Restart the Windows NT PDC on the network and demote it to a BDC.D.Shut down the PDC of the existing Windows NT domain from the network. On the new computer, install Windows 2000 Server, and then run the Active Directory installation wizard to install A

6、ctive Directory as a replica in the existing Windows NT domain. Promote the new computer to the PDC of the domain. Restart Windows NT PDC on the network and demote it to a BDC.2.You are installing Windows 2000 Server on a multiprocessor computer. The manufacturer has provided a customized Hardware a

7、bstraction layer (HAL) to use with the computer. The customized HAL is on a floppy disk.You want to install the customized HAL designed for the computer. What should you do?（分数：2.00）A.During the text mode portion of the Windows 2000 setup, install the customized HAL.B.After the text mode portion of

8、Windows 2000 Setup is complete, use the Recovery Console to copy the customized HAL to the system32 folder on the boot partition, and then continue Windows 2000 SetupC.After the text mode portion of windows 2000 Setup is complete, use the Emergency Repair process to replace the existing HAL with the

9、 customized HAL, and then continue the windows 2000 Setup.D.After the Windows 2000 Setup is complete, use Device Manager to scan for Hardware changes. When prompted, install the customized HAL.3.You are the network administrator for Ezonexam.The network includes a Windows 2000 Server computer that c

10、ontains a single 36-GB hard disk. The drive is configured as a basic disk and has two partitions. Partition C is 4 GB in size and contains the operating system files. Partition D is 32 GB in size and contains user data that is updated frequently.Both partitions are formatted as NTFS. Both partitions

11、 are backed up to a tape every evening at 11:00 P.M.You have a current Emergency Repair Disk (ERD) for the computer, and Recovery Console is installed on the computer.One day at2:00 P.M., the server fails. You attempt to restart the computer, but you receive the following error message: “Boot disk o

12、r operating system not found.“ You use Recovery Console to discover that the files on partition C are corrupted.You want to recover the server from the failure as quickly as possible. You also want to recover as much user data as possible.What should you do?（分数：2.00）A.Start the computer by using a W

13、indows 2000 Server compact disc. Select the Repair option in Setup.B.Install a second hard disk in the computer. Install Windows 2000 Server on the new hard disk. Re-create the shared folders on the first hard disk.C.Use a Windows 2000 Server boot floppy disk to start the computer. Replace the corru

14、pted files on partition C by copying them from the Emergency Repair Disk.D.Boot to the Recovery Console. Copy any files that have changed since 11:00 P.M. the previous evening to a second server. Use the most recent tape backup to restore the remaining user data to the second server.4.You are the ad

15、ministrator of a Windows 2000 Server computer at Blue sky Airlines. You onfigure a server named print10.marketing.blueskyairlines.local as a print server at the Los Angeles site. You create and share a variety of printers on the server for use by employees in the arketing.blueskyairlines.local domai

16、n.You want to review the configured properties of all the shared printers on the rint10.marketing.blueskyairlines.local server. You want to perform this review from a Windows 2000 Professional computer at theLondon site of Blue sky Airlines.What should you do?（分数：2.00）A.Use your web browser to conne

17、ct to http:/print10.marketing.blueskyairlines.local/printers.B.Use your web browser to connect to http:/print10.blueskyairlines.local/printers.C.Run the net view/print 10 command.D.Run the net view/print command.5.One of the file servers in the domain is a Windows 2000 Server computer named Ezonexa

18、mfiles.Ezonexamfiles contains a shared folder named Accounting, which is used to store data for the companys accounts payable department.The permissions on the Accounting folder are configured as shown in the following table. （分数：2.00）A.Instruct King to log off his computer and log on again.B.Move K

19、ings user account to the same Active Directory organizational unit (OU) as Ezonexamfiles.C.Modify the NTFS permissions on the Accounting folder to grant King Full Control permissions.D.Modify the NTFS permissions on the Accounting folder to grant the AcctPay domain local group Full Control permissio

20、n.6.You are the administrator of a Windows 2000 Server computer. A folder named HR-Data on the system partition of the server is shared on the network as HR-Data. The owner of the HR-Data folder is Administrators.The shared permissions and NTFS permissions are shown in the following table.Share perm

21、issions:Everyone: FULL ControlNTFS permissionsDomain Admins: ReadKatrin: Full ControlKatrin creates a file in the HR-Data folder. She sets the NTFS permissions for the file to list only herself on the access control list, with Full Control permission. Katrin then leaves on vacation and cannot be con

22、tacted.Later, you discover that the file contains sensitive information and must be removed from the server as soon as possible. You want to delete the file without modifying any of the permissions for other files in the HR-Data folder. You want your actions to have least possible impact on users wh

23、o may be using other files in the HR-Data folder. You want to use the minimum amount of authority necessary to delete the file.What should you do?（分数：2.00）A.Grant yourself Full Control permission for only the HR-data folder and not its subobjects. Delete the file. Then remove Full Control permission

24、 for HR-Data folder.B.Take ownership of the HR-Data folder. When prompted, take ownership of the existing files. Grant yourself Full Control permission for the file. Delete the file.C.Take ownership of the file. Grant yourself Modify permission for the file. Delete the file.D.Grant yourself Modify p

25、ermission for the HR-Data folder and its subobjects. Delete the file. Then remove Modify permission for the HR-Data folder.二、多选题(总题数：1，分数：2.00)7.You are the network administrator for E.You need to upgrade a computer from Windows NT Server 4.0 to Windows 2000 server. The server has dual processors, 2

26、 GB of RAM, a RAID controller with five SCSI hard disks in an array, and a generic 10/100-MB network adapter. You begin the installation of the Windows 2000 Server operating system.During the text portion of the installation, you receive the following error message:“Stop 0x00000078 Inaccessible_boot

27、_device.“You want to successfully upgrade the computer.What should you do? (Each answer presents part of the solution. Choose two)（分数：2.00）A.Start the computer by using a DOS disk and run FDISK.B.Update the firmware on the RAID controller.C.Restart the installation. During the text-mode setup-mode s

28、etup, press F6.D.Restart the installation. During the text-mode setup, create a new partition.E.Insert a floppy disk containing the OEM SCSI driver and specify the additional driver.微软认证 70-215-试卷 2 答案解析(总分：14.00，做题时间：90 分钟)一、单选题(总题数：6，分数：12.00)1.You are the administrator of a network that consists

29、of a single Windows NT 4.0 domain. The network contains five Windows NT Server domain controllers and 1,000 Windows NT Workstation client computers.You want to install Windows 2000 Server on a new computer. You want the new computer to act as domain controller in the existing domain.What should you

30、do?（分数：2.00）A.On the new computer, install Windows NT Server 4.0 and designate the computer as a BDC in the existing domain. Promote the computer to the PDC of the domain. Upgrade the computer to Windows 2000 Server. B.On the new computer, install Windows NT Server 4.0 and designate the computer as

31、a PDC in a new domain that has the same NetBIOS name as the existing Windows NT domain. Upgrade the computer to Windows 2000 Server. Use the Active Directory sites and services to force synchronization of the domain controllers.C.Shut down the PDC of the existing Windows NT domain from the network.

32、On the new computer, install Windows 2000 Server, and then run the Active Directory installation wizard to install Active Directory, specifying the same NetBIOS name for the Windows 2000 domain as the existing Windows NT domain. Restart the Windows NT PDC on the network and demote it to a BDC.D.Shut

33、 down the PDC of the existing Windows NT domain from the network. On the new computer, install Windows 2000 Server, and then run the Active Directory installation wizard to install Active Directory as a replica in the existing Windows NT domain. Promote the new computer to the PDC of the domain. Res

34、tart Windows NT PDC on the network and demote it to a BDC.解析：解析：Explanation: To install a Windows 2000 computer as a domain controller in a Windows NT 4.0 domain, we must first install Windows NT 4.0 the computer as a BDC in the Windows NT 4.0 domain and then promote the BDC to PDC. We must then upg

35、rade the machine to Windows 2000 Server. When upgrading the domain controllers in a Windows NT domain to Windows 2000, we must upgrade the primary domain controller first. Incorrect answers: B: The computer must be installed as BDC and then later promoted to PDC. C: The computer must first be instal

36、led as a Windows NT 4.0 BDC and then promoted to PDC. D: The computer must first be installed as a Windows NT 4.0 BDC and then promoted to PDC.2.You are installing Windows 2000 Server on a multiprocessor computer. The manufacturer has provided a customized Hardware abstraction layer (HAL) to use wit

37、h the computer. The customized HAL is on a floppy disk.You want to install the customized HAL designed for the computer. What should you do?（分数：2.00）A.During the text mode portion of the Windows 2000 setup, install the customized HAL. B.After the text mode portion of Windows 2000 Setup is complete,

38、use the Recovery Console to copy the customized HAL to the system32 folder on the boot partition, and then continue Windows 2000 SetupC.After the text mode portion of windows 2000 Setup is complete, use the Emergency Repair process to replace the existing HAL with the customized HAL, and then contin

39、ue the windows 2000 Setup.D.After the Windows 2000 Setup is complete, use Device Manager to scan for Hardware changes. When prompted, install the customized HAL.解析：解析：Explanation: The hardware abstraction layer (HAL) is installed during the installation of the operating system. Usually the operating

40、 system will detect the HAL and install a standard HAL. To install the customized hardware abstraction layer (HAL) designed for the computer that the manufacturer has provided we must press F6 when the Windows 2000 setup prompts us to do so. This will allow us to supply the setup program with the cu

41、stomized HAL that should be installed. To supply a HAL file to Setup, we should press F5 and specify the type of custom Hardware Abstraction Layer (HAL) to be loaded by the Setup Loader and installed by text-mode Setup. Incorrect answers: B: The Recovery Console is not used to install the HAL. C: Th

42、e Emergency Repair process is not used to install the HAL. D: Device manager could be used to upgrade the HAL for multiprocessor support. However, the HAL is configured during the Windows 2000 installation phase.3.You are the network administrator for Ezonexam.The network includes a Windows 2000 Ser

43、ver computer that contains a single 36-GB hard disk. The drive is configured as a basic disk and has two partitions. Partition C is 4 GB in size and contains the operating system files. Partition D is 32 GB in size and contains user data that is updated frequently.Both partitions are formatted as NT

44、FS. Both partitions are backed up to a tape every evening at 11:00 P.M.You have a current Emergency Repair Disk (ERD) for the computer, and Recovery Console is installed on the computer.One day at2:00 P.M., the server fails. You attempt to restart the computer, but you receive the following error me

45、ssage: “Boot disk or operating system not found.“ You use Recovery Console to discover that the files on partition C are corrupted.You want to recover the server from the failure as quickly as possible. You also want to recover as much user data as possible.What should you do?（分数：2.00）A.Start the co

46、mputer by using a Windows 2000 Server compact disc. Select the Repair option in Setup. B.Install a second hard disk in the computer. Install Windows 2000 Server on the new hard disk. Re-create the shared folders on the first hard disk.C.Use a Windows 2000 Server boot floppy disk to start the compute

47、r. Replace the corrupted files on partition C by copying them from the Emergency Repair Disk.D.Boot to the Recovery Console. Copy any files that have changed since 11:00 P.M. the previous evening to a second server. Use the most recent tape backup to restore the remaining user data to the second ser

48、ver.解析：解析：Explanation: There are four ways to perform an attended installation: 1. Boot to a CD-ROM, thereby invoking the setup routine. 2. Boot to a current operating system with CD-ROM support and manually invoke the setup routine. 3. Boot to a set of four setup disks and then provide the CD-ROM w

49、hen prompted. 4. Boot to a network-aware operating system and invoke setup over the network. If you have a computer whose BIOS supports booting from a CD-ROM, you can set up Windows 2000 Server without installing an operating system on your hard drive and without requiring network support. To do so, configure your computer to boot to the CD-ROM in the BIOS. In the above scenario the server failed and for you to recover the server as quickly as possible and recovering as much data as possible you need to use the Windows 2000 Server CD and select the Rep