ETSI TS 138 455-2018 5G NG-RAN NR Positioning Protocol A (NRPPa) (V15 0 0 3GPP TS 38 455 version 15 0 0 Release 15).pdf

《ETSI TS 138 455-2018 5G NG-RAN NR Positioning Protocol A (NRPPa) (V15 0 0 3GPP TS 38 455 version 15 0 0 Release 15).pdf》由会员分享，可在线阅读，更多相关《ETSI TS 138 455-2018 5G NG-RAN NR Positioning Protocol A (NRPPa) (V15 0 0 3GPP TS 38 455 version 15 0 0 Release 15).pdf（60页珍藏版）》请在麦多课文档分享上搜索。

1、 ETSI TS 138 455 V15.0.0 (2018-07) 5G; NG-RAN; NR Positioning Protocol A (NRPPa) (3GPP TS 38.455 version 15.0.0 Release 15) TECHNICAL SPECIFICATION ETSI ETSI TS 138 455 V15.0.0 (2018-07)13GPP TS 38.455 version 15.0.0 Release 15Reference DTS/TSGR-0338455vf00 Keywords 5G ETSI 650 Route des Lucioles F-

2、06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association but non lucratif enregistre la Sous-Prfecture de Grasse (06) N 7803/88 Important notice The present document can be downloaded from: http:/www.etsi.org/standards-sea

3、rch The present document may be made available in electronic versions and/or in print. The content of any electronic and/or print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any existing or perceived difference in contents betwee

4、n such versions and/or in print, the only prevailing document is the print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Informati

5、on on the current status of this and other ETSI documents is available at https:/portal.etsi.org/TB/ETSIDeliverableStatus.aspx If you find errors in the present document, please send your comment to one of the following services: https:/portal.etsi.org/People/CommiteeSupportStaff.aspx Copyright Noti

6、fication No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm except as authorized by written permission of ETSI. The content of the PDF version shall not be modified without the written authorization of ETSI. The copyright

7、 and the foregoing restriction extend to reproduction in all media. ETSI 2018. All rights reserved. DECTTM, PLUGTESTSTM, UMTSTMand the ETSI logo are trademarks of ETSI registered for the benefit of its Members. 3GPPTM and LTETMare trademarks of ETSI registered for the benefit of its Members and of t

8、he 3GPP Organizational Partners. oneM2M logo is protected for the benefit of its Members. GSMand the GSM logo are trademarks registered and owned by the GSM Association. ETSI ETSI TS 138 455 V15.0.0 (2018-07)23GPP TS 38.455 version 15.0.0 Release 15Intellectual Property Rights Essential patents IPRs

9、 essential or potentially essential to normative deliverables may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: “Intellectual Property Rights (IPRs); Essential, or p

10、otentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (https:/ipr.etsi.org/). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI

11、. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Trademarks The present document may include trademarks and/or tradenames which are asserted

12、and/or registered by their owners. ETSI claims no ownership of these except for any which are indicated as being the property of ETSI, and conveys no right to use or reproduce any trademark and/or tradename. Mention of those trademarks in the present document does not constitute an endorsement by ET

13、SI of products, services or organizations associated with those trademarks. Foreword This Technical Specification (TS) has been produced by ETSI 3rd Generation Partnership Project (3GPP). The present document may refer to technical specifications or reports using their 3GPP identities, UMTS identiti

14、es or GSM identities. These should be interpreted as being references to the corresponding ETSI deliverables. The cross reference between GSM, UMTS, 3GPP and ETSI identities can be found under http:/webapp.etsi.org/key/queryform.asp. Modal verbs terminology In the present document “shall“, “shall no

15、t“, “should“, “should not“, “may“, “need not“, “will“, “will not“, “can“ and “cannot“ are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of provisions). “must“ and “must not“ are NOT allowed in ETSI deliverables except when used in direct cit

16、ation. ETSI ETSI TS 138 455 V15.0.0 (2018-07)33GPP TS 38.455 version 15.0.0 Release 15Contents Intellectual Property Rights 2g3Foreword . 2g3Modal verbs terminology 2g3Foreword . 5g31 Scope 6g32 References 6g33 Definitions, symbols and abbreviations . 6g33.1 Definitions 6g33.2 Symbols 7g33.3 Abbrevi

17、ations . 7g34 General . 7g34.1 Procedure specification principles 7g34.2 Forwards and backwards compatibility 7g34.3 Specification notations . 7g35 NRPPa services 8g35.1 NRPPa procedure modules . 8g35.2 Parallel transactions 8g36 Services expected from lower layer . 8g37 Functions of NRPPa . 8g38 NR

18、PPa procedures 9g38.1 Elementary procedures . 9g38.2 Location Information Transfer Procedures . 9g38.2.1 E-CID Measurement Initiation . 9g38.2.1.1 General 9g38.2.1.2 Successful Operation . 10g38.2.1.3 Unsuccessful Operation 10g38.2.2 E-CID Measurement Failure Indication 11g38.2.2.1 General 11g38.2.2

19、.2 Successful Operation . 11g38.2.2.3 Unsuccessful Operation 11g38.2.3 E-CID Measurement Report . 11g38.2.3.1 General 11g38.2.3.2 Successful Operation . 11g38.2.3.3 Unsuccessful Operation 12g38.2.4 E-CID Measurement Termination 12g38.2.4.1 General 12g38.2.4.2 Successful Operation . 12g38.2.4.3 Unsuc

20、cessful Operation 12g38.2.5 OTDOA Information Exchange 12g38.2.5.1 General 12g38.2.5.2 Successful Operation . 12g38.2.5.3 Unsuccessful Operation 13g38.3 Management Procedures 13g38.3.1 Error Indication . 13g38.3.1.1 General 13g38.3.1.2 Successful Operation . 13g38.3.1.3 Abnormal Conditions 13g39 Ele

21、ments for NRPPa Communication 14g39.0 General . 14g39.1 Message Functional Definition and Content 14g39.1.1 Messages for Location Information Transfer Procedures . 14g3ETSI ETSI TS 138 455 V15.0.0 (2018-07)43GPP TS 38.455 version 15.0.0 Release 159.1.1.1 E-CID MEASUREMENT INITIATION REQUEST . 14g39.

22、1.1.2 E-CID MEASUREMENT INITIATION RESPONSE . 15g39.1.1.3 E-CID MEASUREMENT INITIATION FAILURE 15g39.1.1.4 E-CID MEASUREMENT FAILURE INDICATION . 15g39.1.1.5 E-CID MEASUREMENT REPORT 15g39.1.1.6 E-CID MEASUREMENT TERMINATION COMMAND 16g39.1.1.7 OTDOA INFORMATION REQUEST . 16g39.1.1.8 OTDOA INFORMATI

23、ON RESPONSE . 16g39.1.1.9 OTDOA INFORMATION FAILURE 17g39.1.2 Messages for Management Procedures . 17g39.1.2.1 ERROR INDICATION . 17g39.2 Information Element definitions . 18g39.2.0 General 18g39.2.1 Cause 18g39.2.2 Criticality Diagnostics 19g39.2.3 Message Type . 20g39.2.4 NRPPa Transaction ID 20g3

24、9.2.5 E-CID Measurement Result 20g39.2.6 NG-RAN CGI . 21g39.2.7 CGI EUTRA . 22g39.2.8 PLMN Identity 22g39.2.10 NG-RAN Access Point Position . 22g39.2.11 TAC 23g39.2.12 Cell Portion ID 23g39.2.13 Other-RAT Measurement Result 24g39.2.14 WLAN Measurement Result. 24g39.2.15 OTDOA Cell Information . 25g3

25、9.2.16 PRS Muting Configuration EUTRA . 27g39.2.17 PRS Frequency Hopping Configuration EUTRA . 27g39.3 Message and Information Element Abstract Syntax (with ASN.1) 29g39.3.1 General 29g39.3.2 Usage of Private Message Mechanism for Non-standard Use 29g39.3.3 Elementary Procedure Definitions 29g39.3.4

26、 PDU Definitions . 33g39.3.5 Information Element definitions . 38g39.3.6 Common definitions . 51g39.3.7 Constant definitions 52g39.3.8 Container definitions. 53g39.4 Message transfer syntax . 57g39.5 Timers 57g310 Handling of unknown, unforeseen and erroneous protocol data 57g3Annex A (informative):

27、 Change history . 58g3History 59g3ETSI ETSI TS 138 455 V15.0.0 (2018-07)53GPP TS 38.455 version 15.0.0 Release 15Foreword This Technical Specification has been produced by the 3rd Generation Partnership Project (3GPP). The contents of the present document are subject to continuing work within the TS

28、G and may change following formal TSG approval. Should the TSG modify the contents of the present document, it will be re-released by the TSG with an identifying change of release date and an increase in version number as follows: Version x.y.z where: x the first digit: 1 presented to TSG for inform

29、ation; 2 presented to TSG for approval; 3 or greater indicates TSG approved document under change control. y the second digit is incremented for all changes of substance, i.e. technical enhancements, corrections, updates, etc. z the third digit is incremented when editorial only changes have been in

30、corporated in the document. ETSI ETSI TS 138 455 V15.0.0 (2018-07)63GPP TS 38.455 version 15.0.0 Release 151 Scope The present document specifies the control plane radio network layer signalling procedures between a NG-RAN node and the LMF. NRPPa supports the concerned functions by signalling proced

31、ures defined in this document. 2 References The following documents contain provisions which, through reference in this text, constitute provisions of the present document. - References are either specific (identified by date of publication, edition number, version number, etc.) or non-specific. - F

32、or a specific reference, subsequent revisions do not apply. - For a non-specific reference, the latest version applies. In the case of a reference to a 3GPP document (including a GSM document), a non-specific reference implicitly refers to the latest version of that document in the same Release as t

33、he present document. 1 3GPP TR 21.905: “Vocabulary for 3GPP Specifications“. 2 3GPP TS 38.413:“NG-RAN; NG Application Protocol (NGAP)“. 3 3GPP TS 38.300: “NR; NR and NG-RAN Overall Description; Stage 2“. 4 3GPP TS 38.413: “NG-RAN; NG Application Protocol (NGAP)“. 5 3GPP TR 25.921 (version.7.0.0): “G

34、uidelines and principles for protocol description and error handling“. 6 ITU-T Recommendation X.691 (2002-07): “Information technology - ASN.1 encoding rules - Specification of Packed Encoding Rules (PER) “. 7 3GPP TS 36.104: “Evolved Universal Terrestrial Radio Access Network (E-UTRAN); Base Statio

35、n (BS) radio transmission and reception“. 8 3GPP TS 23.032:“Technical Specification Group Services and System Aspects; Universal Geographical Area Description (GAD)“. 9 3GPP TS 36.133: “Evolved Universal Terrestrial Radio Access (E-UTRA); Requirements for support of radio resource management“. 10 3G

36、PP TS 36.211:“Evolved Universal Terrestrial Radio Access Network (E-UTRAN); Physical Channels and Modulation“. 11 IEEE Std 802.11-2012, IEEE Standard for Information technology - Telecommunications and information exchange between systems - Local and metropolitan area network. 12 3GPP TS 36.455: “ E

37、volved Universal Terrestrial Radio Access (E-UTRA); LTE Positioning Protocol A (LPPa)“. 3 Definitions, symbols and abbreviations 3.1 Definitions For the purposes of the present document, the terms and definitions given in 3GPP TR 21.905 1 and the following apply. A term defined in the present docume

38、nt takes precedence over the definition of the same term, if any, in 3GPP TR 21.905 1. NG-RAN node: as defined in TS 38.300 3. ng-eNB: as defined in TS 38.300 3. ETSI ETSI TS 138 455 V15.0.0 (2018-07)73GPP TS 38.455 version 15.0.0 Release 153.2 Symbols For the purposes of the present document, the f

39、ollowing symbols apply: 3.3 Abbreviations For the purposes of the present document, the abbreviations given in 3GPP TR 21.905 1 and the following apply. An abbreviation defined in the present document takes precedence over the definition of the same abbreviation, if any, in 3GPP TR 21.905 1. CID Cel

40、l-ID (positioning method) E-CID Enhanced Cell-ID (positioning method) LMF Location Management Function OTDOA Observed Time Difference of Arrival 4 General 4.1 Procedure specification principles The principle for specifying the procedure logic is to specify the functional behaviour of the terminating

41、 NG-RAN Node exactly and completely. Any rule that specifies the behaviour of the originating NG-RAN Node shall be possible to be verified with information that is visible within the system. The following specification principles have been applied for the procedure text in clause 8: - The procedure

42、text discriminates between: 1) Functionality which “shall“ be executed The procedure text indicates that the receiving node “shall“ perform a certain function Y under a certain condition. If the receiving node supports procedure X but cannot perform functionality Y requested in the initiating messag

43、e of a Class 1 EP, the receiving node shall respond with the message used to report unsuccessful outcome for this procedure, containing an appropriate cause value. 2) Functionality which “shall, if supported“ be executed The procedure text indicates that the receiving node “shall, if supported,“ per

44、form a certain function Y under a certain condition. If the receiving node supports procedure X, but does not support functionality Y, the receiving node shall proceed with the execution of the EP, possibly informing the requesting node about the not supported functionality. - Any required inclusion

45、 of an optional IE in a response message is explicitly indicated in the procedure text. If the procedure text does not explicitly indicate that an optional IE shall be included in a response message, the optional IE shall not be included. For requirements on including Criticality Diagnostics IE, see

46、 section 10. 4.2 Forwards and backwards compatibility The forwards and backwards compatibility of the protocol is assured by a mechanism where all current and future messages, and IEs or groups of related IEs, include ID and criticality fields that are coded in a standard format that will not be cha

47、nged in the future. These parts can always be decoded regardless of the standard version. 4.3 Specification notations For the purposes of the present document, the following notations apply: Procedure When referring to an elementary procedure in the specification the Procedure Name is written with t

48、he first letters in each word in upper case characters followed by the word “procedure“, e.g. Handover Preparation procedure. ETSI ETSI TS 138 455 V15.0.0 (2018-07)83GPP TS 38.455 version 15.0.0 Release 15Message When referring to a message in the specification the MESSAGE NAME is written with all l

49、etters in upper case characters followed by the word “message“, e.g. ERROR INDICATION message. IE When referring to an information element (IE) in the specification the Information Element Name is written with the first letters in each word in upper case characters and all letters in Italic font followed by the abbreviation “IE“, e.g. Cause IE. Value of an IE When referring to the value of an information element (IE) in the specification the “Value“ is written as it is specified in sub clause 9.2 enclosed by quotation marks, e.g. “Value“. 5