EN 1648-1-2018 Leisure accommodation vehicles - 12 V direct current extra low voltage electrical installations - Part 1 Caravans.pdf

《EN 1648-1-2018 Leisure accommodation vehicles - 12 V direct current extra low voltage electrical installations - Part 1 Caravans.pdf》由会员分享，可在线阅读，更多相关《EN 1648-1-2018 Leisure accommodation vehicles - 12 V direct current extra low voltage electrical installations - Part 1 Caravans.pdf（20页珍藏版）》请在麦多课文档分享上搜索。

1、BSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06Leisure accommodation vehicles - 12 V direct current extra low voltage electrical installationsPart 1: CaravansBS EN 1648-1:2018EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 1648-1 January 2018 ICS 43.040.10; 43.

2、100 Supersedes EN 1648-1:2012English Version Leisure accommodation vehicles - 12 V direct current extra low voltage electrical installations - Part 1: CaravansVhicules habitables de loisirs - Installations lectriques trs basse tension de 12 V en courant continu - Partie 1: Caravanes Bewohnbare Freiz

3、eitfahrzeuge - Elektrische Anlagen fr DC 12 V - Teil 1: Caravans This European Standard was approved by CEN on 20 November 2017. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standar

4、d without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any

5、other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republ

6、ic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EU

7、ROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2018 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 1648-1:2018 EN

8、ational forewordThis British Standard is the UK implementation of EN 1648-1:2018. It supersedes BS EN 1648-1:2012, which is withdrawn.The UK participation in its preparation was entrusted to Technical Committee B/511, Buildings mobile and temporary.A list of organizations represented on this committ

9、ee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. The British Standards Institution 2018 Published by BSI Standards Limited 2018ISBN 978 0 580 97014 6ICS 43.100; 4

10、3.040.10Compliance with a British Standard cannot confer immunity from legal obligations.This British Standard was published under the authority of the Standards Policy and Strategy Committee on 28 February 2018.Amendments/corrigenda issued since publicationDate Text affectedBRITISH STANDARDBS EN 16

11、48-1:2018EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 1648-1 January 2018 ICS 43.040.10; 43.100 Supersedes EN 1648-1:2012English Version Leisure accommodation vehicles - 12 V direct current extra low voltage electrical installations - Part 1: CaravansVhicules habitables de loisirs - Installa

12、tions lectriques trs basse tension de 12 V en courant continu - Partie 1: Caravanes Bewohnbare Freizeitfahrzeuge - Elektrische Anlagen fr DC 12 V - Teil 1: Caravans This European Standard was approved by CEN on 20 November 2017. CEN members are bound to comply with the CEN/CENELEC Internal Regulatio

13、ns which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. T

14、his European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN me

15、mbers are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Port

16、ugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2018 CEN All rights of exploitation

17、in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 1648-1:2018 EBS EN 1648-1:2018EN 1648-1:2018 (E) 2 Contents Page European foreword . 4 Introduction 5 1 Scope 6 2 Normative references 6 3 Terms and definitions . 6 4 Power supply 7 4.1 General 7 4.2 Sources of sup

18、ply . 7 4.3 Auxiliary batteries 7 4.3.1 Type of battery . 7 4.3.2 Terminals . 7 4.3.3 Location 7 4.3.4 Caravans without auxiliary battery 7 4.3.5 Auxiliary battery compartment . 8 4.3.6 Warning notice . 8 4.4 Other sources of supply 8 4.4.1 Generators and transformer/rectifiers unit . 8 4.4.2 Regene

19、rative energy sources 8 4.5 Protective measures 9 5 Wiring 9 5.1 Connection to electrical system of towing vehicle 9 5.1.1 Connecting cables 9 5.1.2 Protecting of disconnected plug 9 5.1.3 Contact allocation . 9 5.1.4 Charging of auxiliary battery and/or operation of refrigerator . 10 5.1.5 Protecti

20、on of terminal block 10 5.2 Cable and fixed wiring cross-sectional areas . 10 5.3 Fixed wiring 10 5.3.1 Cables 10 5.3.2 Type of cable 10 5.3.3 Cable installation 10 5.3.4 Supporting of cables 11 5.3.5 Connections 11 5.3.6 Auxiliary battery cables . 11 6 Overcurrent protection 11 6.1 Protection of po

21、sitive conductors 11 6.2 Types of device 11 6.3 Installation of fuses . 11 6.4 Prohibited locations 12 6.4.1 Overcurrent protection devices 12 6.4.2 Electrical equipment in LPG storage compartment . 12 7 Installation of appliances 12 7.1 General . 12 7.2 Selection and connection of appliances . 12 B

22、S EN 1648-1:2018EN 1648-1:2018 (E) 3 7.3 Socket outlets . 12 7.4 Battery charger 12 7.5 External luminaires . 13 7.6 Voltage drop . 13 7.7 Manufacturers connection for additional fixed appliances . 13 8 Users handbook . 13 Annex A (informative) Relation of cable cross-sectional area, current flow an

23、d cable length for fixed wiring installations 14 A.1 General . 14 A.2 Graphs for obtaining minimum cross-sectional areas 14 A.3 Calculation of the minimum cross-sectional areas 15 Bibliography . 17 BS EN 1648-1:2018EN 1648-1:2018 (E) 4 European foreword This document (EN 1648-1:2018) has been prepar

24、ed by Technical Committee CEN/TC 245 “Leisure accommodation vehicles”, the secretariat of which is held by AFNOR. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by July 2018, and conflicting nationa

25、l standards shall be withdrawn at the latest by July 2018. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN not be held responsible for identifying any or all such patent rights. This document supersedes EN 1648-1:2012. EN 1648

26、, Leisure accommodation vehicles 12 V direct current extra low voltage electrical installations, is currently composed with the following parts: Part 1: Caravans; Part 2: Motor caravans. In relation to EN 1648-1:2012, the main technical changes are: a) Figure 1 modified to remove EN 1645-2 and EN 16

27、46-2 which were withdrawn; b) Table 1 updated; c) in 4.3.5 “Auxiliary battery compartment”, new generations of batteries covered; d) 4.3.6 “Warning notice” the graphical symbol and marking changed; e) in 5.3.6 “Auxiliary battery cables”, dimension for taping added; f) 6.4.2 “Electric equipment in LP

28、G storage compartment” modified and headline updated g) 6.4 “Prohibited locations” modified; h) normative references updated; i) editorially modified. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this Europe

29、an Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovaki

30、a, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. BS EN 1648-1:2018EN 1648-1:2018 (E) 5 Introduction Figure 1 gives an overview of the relevant European Standards for caravans, motor caravans and caravan holiday homes. Figure 1 Overview of relevant European Standards applying t

31、o leisure accommodation vehicles BS EN 1648-1:2018EN 1648-1:2018 (E) 6 1 Scope This European Standard specifies safety, health and functional requirements for 12 V direct current (DC) extra low voltage (ELV) electrical installations for habitation aspects of caravans. It covers the design and integr

32、ation of the caravan system with the towing vehicle system. It does not apply to commercial trailers; nor does it include requirements for ELV road lighting and signalling lamps and their installations, except for safety requirements for the routing of cables in LPG storage compartments. This Europe

33、an Standard also specifies the ELV output requirements of low voltage (LV) equipment that may be used to provide an ELV supply but it does not specify safety, technical and functional requirements for LV appliances and installations. Requirements for LV installations are specified in HD 60364-7-721.

34、 2 Normative references The following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (includin

35、g any amendments) applies. EN 50525 (all parts), Electric cables Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U) EN 13878, Leisure accommodation vehicles Terms and definitions HD 60364-4-43, Low-voltage electrical installations Part 4-43: Protection for safety Protec

36、tion against overcurrent (IEC 60364-4-43) EN 60529, Degrees of protection provided by enclosures (IP Code) (IEC 60529) EN 60898-2, Electrical accessories Circuit-breakers for overcurrent protection for household and similar installations Part 2: Circuit-breakers for a.c. and d.c. operation (IEC 6089

37、8-2) ISO 6722 (all parts), Road vehicles 60 V and 600 V single-core cables ISO 7010, Graphical symbols Safety colours and safety signs Registered safety signs ISO 8820-1, Road vehicles Fuse-links Part 1: Definitions and general test requirements ISO 8820-3, Road vehicles Fuse-links Part 3: Fuse-link

38、s with tabs (blade type) Type C (medium), Type E (high current) and Type F (miniature) ISO 8820-4, Road vehicles Fuse-links Part 4: Fuse-links with female contacts (type A) and bolt-in contacts (type B) and their test fixtures ISO 11446-1:2012, Road vehicles Connectors for the electrical connection

39、of towing and towed vehicles Part 1: 13-pole connectors for vehicles with 12 V nominal supply voltage not intended to cross water fords 3 Terms and definitions For the purposes of this document, the terms and definitions given in EN 13878 apply. ISO and IEC maintain terminological databases for use

40、in standardization at the following addresses: BS EN 1648-1:2018EN 1648-1:2018 (E) 7 IEC Electropedia: available at http:/www.electropedia.org/ ISO Online browsing platform: available at http:/www.iso.org/obp 4 Power supply 4.1 General The power supply shall be a nominal DC 12 V (minimum 11 V and ma

41、ximum 15 V). 4.2 Sources of supply The supply shall be obtained from one or more of the following sources: a) the electrical installation of the towing vehicle; b) an auxiliary battery mounted within the caravan (see 4.3); c) LV supply via an on-board mounted AC/DC converter (e.g. transformer, switc

42、hing power supply) that complies with the requirements of the relevant standards in accordance with Directive 2014/35/EU and subsequent amendments; d) DC generator (see 4.4.1); e) regenerative energy sources (see 4.4.2). If several sources of supply are used it shall be ensured that there is no unfa

43、vourable interaction. 4.3 Auxiliary batteries 4.3.1 Type of battery An auxiliary battery shall be of the rechargeable type. 4.3.2 Terminals Auxiliary battery terminals shall be clearly and durably marked “+” and “. Connections to auxiliary battery terminals shall be securely clamped or bolted to ens

44、ure continuous contact and shall be insulated unless the auxiliary battery is provided with an insulating cover. 4.3.3 Location An auxiliary battery shall be placed in a compartment according to 4.3.5, which is designed to protect it from mechanical damage, with easy access for maintenance and/or re

45、moval and secured to prevent movement of the battery, e.g. when the caravan is in motion. 4.3.4 Caravans without auxiliary battery If an auxiliary battery is intended to be used but not provided, then the position and instructions for the installation shall be included in the users handbook accordin

46、g to Clause 8 and a notice shall be fixed in its compartment or near the proposed location. If a caravan is not designed to accept an auxiliary battery, it shall be clearly stated in the users handbook. BS EN 1648-1:2018EN 1648-1:2018 (E) 8 4.3.5 Auxiliary battery compartment 4.3.5.1 General The use

47、rs handbook shall include instructions on auxiliary battery installation, when necessary. For underslung battery, a minimum ground clearance shall be observed: see Directive 2007/46/EC, Annex II. 4.3.5.2 Resistant tray Under an auxiliary battery whose electrolyte can flow, an electrolyte resistant t

48、ray shall be installed, capable of holding at least 20 % of the electrolyte capacity of the recommended battery, when in place. 4.3.5.3 Ventilation Except for sealed auxiliary battery that incorporates an external ventilating kit that is taken to the exterior of the caravan, or battery whose electro

49、lyte cannot flow in case of malfunction, the interior of an auxiliary battery compartment shall be ventilated and protected against the corrosive effect of acid-laden gases, by ventilating the compartment at both low-level and high-level to the exterior of the caravan. The construction of the compartment shall have gas tight joints and shall be sealed to prevent ingress into the habitable compartment and be of an electrolyte resistant material of the installed battery or have an anti-corrosive finish. The