EN 1306-2018 Inland navigation vessels - Connections for the discharge of waste water.pdf

《EN 1306-2018 Inland navigation vessels - Connections for the discharge of waste water.pdf》由会员分享，可在线阅读，更多相关《EN 1306-2018 Inland navigation vessels - Connections for the discharge of waste water.pdf（12页珍藏版）》请在麦多课文档分享上搜索。

1、BSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06Inland navigation vessels - Connections for the discharge of waste waterBS EN 1306:2018National forewordThis British Standard is the UK implementation of EN 1306:2018. It supersedes BS EN 1306:1996, which is withdrawn.T

2、he UK participation in its preparation was entrusted to Technical Committee SME/32, Ships and marine technology - Steering committee.A list of organizations represented on this committee can be obtained on request to its secretary.This publication does not purport to include all the necessary provis

3、ions of a contract. Users are responsible for its correct application. The British Standards Institution 2018 Published by BSI Standards Limited 2018ISBN 978 0 580 95317 0ICS 47.020.30Compliance with a British Standard cannot confer immunity from legal obligations.This British Standard was published

4、 under the authority of the Standards Policy and Strategy Committee on 30 April 2018.Amendments/corrigenda issued since publicationDate Text affectedBRITISH STANDARDBS EN 1306:2018EUROPEAN STANDARDNORME EUROPENNEEUROPISCHE NORMEN 1306March 2018ICS 47.020.30 Supersedes EN 1306:1996EUROPEAN COMMITTEE

5、FOR STANDARDIZATIONCOMIT EUROPEN DE NORMALISATIONEUROPISCHES KOMITEE FR NORMUNGCEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2018 CEN Ref. No. EN 1306:2018: EAll rights of exploitation in any form and by any means reserved worldwide for CEN national MembersInland navigation vessel

6、s - Connections for the discharge of waste waterBateaux de navigation intrieure - Raccords dvacuation deaux usesFahrzeuge der Binnenschifffahrt - Anschlsse fr die Abgabe von AbwasserThis European Standard was approved by CEN on 18 January 2018.CEN members are bound to comply with the CEN/CENELEC Int

7、ernal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to an

8、y CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official ve

9、rsions.CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,

10、 Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.English VersionEN 1306:2018 (E)European foreword 3Introduction . 41 Scope . 52 Normative references 53 Terms and definitions . 54 Technical requirements 54.1 General . 54.2 Design . 54.3 Dim

11、ensions . 84.4 Connection configuration 85 Material 95.1 General . 95.2 Pipe with a threaded neck and adapter . 95.3 Coupling connection . 95.4 Blanking cap 96 Testing . 97 Designation 98 Marking 92Contents PageBS EN 1306:2018EN 1306:2018 (E)European forewordThis document (EN 1306:2018) has been pre

12、pared by Technical Committee CEN/TC 15 “Inland navigation vessels”, the secretariat of which is held by DIN.This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by September 2018, and conflicting national

13、 standards shall be withdrawn at the latest by September 2018.Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN shall not be held responsible for identifying any or all such patent rights.This document supersedes EN 1306:1996.Ac

14、cording to the CEN-CENELEC Internal Regulations, the national standards organisations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germa

15、ny, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.3BS EN 1306:2018EN 1306:2018 (E)IntroductionThis European Standard has been develo

16、ped to specify uniform connections for the discharge of waste water.The connection consists of a quick-release coupling that enables easy and safe handling and safe discharge of waste water. By limiting the use of this coupling device to waste water, confusion is avoided with connections for other f

17、luids.Waste water on inland navigation vessels is disposed of by suction or pressure.4BS EN 1306:2018EN 1306:2018 (E)1 ScopeThis European Standard specifies the design, dimensions, technical requirements and testing of connections for the discharge of waste water produced by inland navigation vessel

18、s.This standard specifies: a connection of a design common on inland navigation vessels which consists of a pipe with a threaded neck and quick-release coupling; a connection for vessels with flange ISO 7608 - B1, consisting of an adapter with matching flange and welded pipe with a threaded neck and

19、 quick-release coupling.2 Normative referencesEN 573-3, Aluminium and aluminium alloys Chemical composition and form of wrought products Part 3: Chemical composition and form of productsEN 12420, Copper and copper alloys ForgingsEN 14420-6, Hose fittings with clamp units Part 6: TW tank truck coupli

20、ngsEN 22768-1, General tolerances Part 1: Tolerances for linear and angular dimensions without individual tolerance indications (ISO 2768-1)EN ISO 228-1, Pipe threads where pressure-tight joints are not made on the threads Part 1: Dimensions, tolerances and designation (ISO 228-1)EN ISO 4018, Hexago

21、n head screws Product grade C (ISO 4018)EN ISO 4034, Hexagon regular nuts (style 1) Product grade C (ISO 4034)ISO 7608, Shipbuilding Inland navigation Couplings for disposal of oily mixture and sewage water3 Terms and definitionsFor the purposes of this document, the following terms and definitions

22、apply.3.1waste waterwaste water from kitchens, dining areas, washrooms (showers, washbasins) and laundry rooms and sewage4 Technical requirements4.1 GeneralGeneral tolerances: ISO 2768 - c.The requirements relate to the design, dimensions and configuration of the connection.The assembly need not cor

23、respond to the representation in Figure 1 and Figure 2, but shall be carried out in such a way that no waste water enters the environment when the connection is released.4.2 DesignDesign R: connection of the inlet pipe permanently installed in the vessel to the quick-release coupling on the suction

24、hose see Figure 1.5BS EN 1306:2018EN 1306:2018 (E)Design F: connection of the flange as specified in ISO 7608 - B1 to the quick-release coupling on the suction hose see Figure 2 .Figure 3 shows the adapter, consisting of flange and a pipe with a threaded neck.Table 1 indicates the items in Figures 1

25、 to 3.Dimensions in millimetresKeyFor item numbers, see parts list in Table 1a Female coupling according to EN 14420-6b Intake sidec Discharge side/vesselFigure 1 Quick-release coupling connection Design R6 BS EN 1306:2018EN 1306:2018 (E)KeyFor item numbers, see parts list in Table 1a Female couplin

26、g as specified in EN 14420-6b Intake sidec Discharge side/vesseld Blanking cape Moulded sealf Flange ISO 7608 - B1g Hexagon head screw ISO 4018 - M16 55 4.6h Hexagon regular nut ISO 4034 - M16 - 5Figure 2 quick-release coupling connection Design F7BS EN 1306:2018EN 1306:2018 (E)Dimensions in millime

27、tresFigure 3 AdapterTable 1 Parts listItem no. Designation Discharge/intake side Note1 Pipe with threaded neck Discharge side See Figure 12 Adapter Intake side See Figure 2 and Figure 33Coupling connection DN 80 with moulded sealFigure 1: Discharge side Figure 2: Intake sideAs specified in EN 14420-

28、64Blanking cap with chain and S-shaped hookFigure 1: Discharge side Figure 2: Intake sideAs specified in EN 14420-64.3 DimensionsThe nominal diameter (DN) for the quick-release coupling is 80 mm.4.4 Connection configuration4.4.1 The connection shall be easily accessible, and the configuration shall

29、allow a hose with a bend radius of approx. 2 000 mm to be easily connected.4.4.2 In order to operate the quick-release coupling, there shall be a clearance with a minimum radius of 200 mm and a minimum depth of 60 mm behind the connection see Figure 1.4.4.3 The connection shall be installed in such

30、a manner as to protect it from damage that might occur during on-board operations and to prevent it constituting a prohibited restriction on any adjacent walkway.8 BS EN 1306:2018EN 1306:2018 (E)5 Material5.1 GeneralWhere materials are not mentioned, they are to be chosen by the manufacturer accordi

31、ng to purpose.5.2 Pipe with a threaded neck and adapterSteel.5.3 Coupling connectionCopper-zinc alloy CuZn39Pb3 (brass) (CW614N) or CuZn40Pb2 (CW617N) as specified in EN 12420.5.4 Blanking capWrought aluminium alloy AlMgSi1 (EN AW-6106) as specified in EN 573-3.6 TestingTesting is carried out via vi

32、sual inspection and measurement.7 DesignationA complete Type R connection as specified in Figure 1, consisting of a pipe with a threaded neck, coupling connection with moulded seal and blanking cap with chain, shall be designated as follows:Connection EN 1306 - R8 MarkingThe connection shall be perm

33、anently marked by means of:a) black paint applied to the pipe neck andb) a sign with dark font on a light background, reading “Discharge connection for waste water EN 1306”, with a font size of 7 mm that shall be applied in the immediate vicinity of the connection.9BS EN 1306:2018This page deliberat

34、ely left blankBSI is the national body responsible for preparing British Standards and other standards-related publications, information and services.BSI is incorporated by Royal Charter. British Standards and other standardization products are published by BSI Standards Limited.British Standards In

35、stitution (BSI)About usWe bring together business, industry, government, consumers, innovators and others to shape their combined experience and expertise into standards -based solutions.The knowledge embodied in our standards has been carefully assembled in a dependable format and refined through o

36、ur open consultation process. Organizations of all sizes and across all sectors choose standards to help them achieve their goals.Information on standardsWe can provide you with the knowledge that your organization needs to succeed. Find out more about British Standards by visiting our website at o

37、r contacting our Customer Services team or Knowledge Centre.Buying standardsYou can buy and download PDF versions of BSI publications, including British and adopted European and international standards, through our website at where hard copies can also be purchased.If you need international and for

38、eign standards from other Standards Development Organizations, hard copies can be ordered from our Customer Services team.Copyright in BSI publicationsAll the content in BSI publications, including British Standards, is the property of and copyrighted by BSI or some person or entity that owns copyri

39、ght in the information used (such as the international standardization bodies) and has formally licensed such information to BSI for commercial publication and use.Save for the provisions below, you may not transfer, share or disseminate any portion of the standard to any other person. You may not a

40、dapt, distribute, commercially exploit, or publicly display the standard or any portion thereof in any manner whatsoever without BSIs prior written consent.Storing and using standardsStandards purchased in soft copy format: A British Standard purchased in soft copy format is licensed to a sole named

41、 user for personal or internal company use only. The standard may be stored on more than 1 device provided that it is accessible by the sole named user only and that only 1 copy is accessed at any one time. A single paper copy may be printed for personal or internal company use only. Standards purch

42、ased in hard copy format: A British Standard purchased in hard copy format is for personal or internal company use only. It may not be further reproduced in any format to create an additional copy. This includes scanning of the document.If you need more than 1 copy of the document, or if you wish to

43、 share the document on an internal network, you can save money by choosing a subscription product (see Subscriptions).Reproducing extractsFor permission to reproduce content from BSI publications contact the BSI Copyright & Licensing team.SubscriptionsOur range of subscription services are designed

44、to make using standards easier for you. For further information on our subscription products go to British Standards Online (BSOL) youll have instant access to over 55,000 British and adopted European and international standards from your desktop. Its available 24/7 and is refreshed daily so youll

45、always be up to date.You can keep in touch with standards developments and receive substantial discounts on the purchase price of standards, both in single copy and subscription format, by becoming a BSI Subscribing Member.PLUS is an updating service exclusive to BSI Subscribing Members. You will au

46、tomatically receive the latest hard copy of your standards when theyre revised or replaced.To find out more about becoming a BSI Subscribing Member and the benefits of membership, please visit a Multi-User Network Licence (MUNL) you are able to host standards publications on your intranet. Licences

47、 can cover as few or as many users as you wish. With updates supplied as soon as theyre available, you can be sure your documentation is current. For further information, email .RevisionsOur British Standards and other publications are updated by amendment or revision. We continually improve the qua

48、lity of our products and services to benefit your business. If you find an inaccuracy or ambiguity within a British Standard or other BSI publication please inform the Knowledge Centre.Useful ContactsCustomer ServicesTel: +44 345 086 9001Email (orders): Email (enquiries): SubscriptionsTel: +44 345 086 9001Email: Knowledge CentreTel: +44 20 8996 7004Email: Copyright & LicensingTel: +44 20 8996 7070Email: BSI Group Headquarters389 Chiswick High Road London W4 4AL UKNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAW