ISO IEC 15775-1999 Information technology - Office machines - Method of specifying image reproduction of colour copying machines by analog test charts - Realisa.pdf

《ISO IEC 15775-1999 Information technology - Office machines - Method of specifying image reproduction of colour copying machines by analog test charts - Realisa.pdf》由会员分享，可在线阅读，更多相关《ISO IEC 15775-1999 Information technology - Office machines - Method of specifying image reproduction of colour copying machines by analog test charts - Realisa.pdf（62页珍藏版）》请在麦多课文档分享上搜索。

1、INTERNATIONAL STANDARD ISO/IEC 15775 First edition AMENDMENT 1 1 999- 1 2-0 1 2005-03-01 Information technology - Office machines - Method of specifying image reproduction of colour copying machines by analog test charts - Realisation and application AMENDMENT 1 Technologies de linformation - Machin

2、es de bureau - Mthode de spcification de la reproduction dimage des copieuses couleur par des organigrammes dessai analogiques - Ralisation et application AMENDEMENT 1 Reference number ISOIIEC 157751 999/Amd.l:2005(E) O ISOIIEC 2005 ISO/IEC 15775:1999/Amd.l:2005(E) PDF disclaimer This PDF file may c

3、ontain embedded typefaces. In accordance with Adobes licensing policy, this file may be printed or viewed but shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In downloading this file, parties accept therein the respons

4、ibility of not infringing Adobes licensing policy. The IS0 Central Secretariat accepts no liability in this area. Adobe is a trademark of Adobe Systems Incorporated. Details of the sofiware products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation

5、parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by IS0 member bodies. In the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below. O ISOIIEC 2005 All rights reserved. Unle

6、ss otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either IS0 at the address below or ISOs member body in the country of the requester. IS0 c

7、opyright office Case postale 56 CH-I211 Geneva 20 Tel. + 41 22 749 O1 11 Fax +41 227490947 E-mail copyrightiso.org Web www.iso.org Published in Switzerland ii O ISOIIEC 2005 -All rights reserved ISO/IEC 15775:1999/Amd.l:2005(E) Foreword IS0 (the International Organization for Standardization) and I

8、EC (the International Electrotechnical Commission) form the specialized system for worldwide standardization. National bodies that are members of IS0 or IEC participate in the development of International Standards through technical committees established by the respective organization to deal with

9、particular fields of technical activity. IS0 and IEC technical committees collaborate in fields of mutual interest. Other international organizations, governmental and non-governmental, in liaison with IS0 and IEC, also take part in the work. In the field of information technology, IS0 and IEC have

10、established a joint technical committee, ISO/IEC JTC 1. International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2. The main task of the joint technical committee is to prepare International Standards. Draft International Standards adopted by the joint t

11、echnical committee are circulated to national bodies for voting. Publication as an International Standard requires approval by at least 75 % of the national bodies casting a vote. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. IS

12、0 and IEC shall not be held responsible for identifying any or all such patent rights. Amendment 1 to ISO/IEC 15775:1999 was prepared by Joint Technical Committee ISO/IEC JTC 1, information technology, Subcommittee SC 28, Ofice equipment. O ISOIIEC 2005 -All rights reserved iii ISO/IEC 15775:1999/Am

13、d.l:2005(E) Information technology - Office machines - Method of specifying image reproduction of colour copying machines by analog test charts - Realisation and application AMENDMENT 1 Insert the following after Annex M: ANNEX N (Informative): Improved ISO/IEC 15775 Test Charts for copier Three imp

14、roved test charts for ISO/IEC 15775 are produced in Japan and introduced in SC 28 SWG “Test chart reproduction“ at BAM, Berlin on November, 1999. We actually showed three kinds of test chart as an Asian version and compared some measured image quality of them with DIN test charts. Although these is

15、no published test chart in full agreement with ISO/IEC 15775 not yet now, we strongly feel to need the improvement on the current components in test charts for the better application of the current standard and the future standards. N 1. Reference 1. ISO/IEC JTC I/SC 28 N369 2. SO/IEC JTC I/SC 28 N3

16、70 3. Testsuya Itoh: “Improvement Proposals on ISO/IEC 15775 Test Charts for Copier and Printer Outputs“, proc.of IS the PDF-creation parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by IS0 member bodies. In the unlikely event that a probl

17、em relating to it is found, please inform the Central Secretariat at the address given below. Q ISO/IEC 1999 All rights resewed. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and mic

18、rofilm, without permission in writing from either IS0 at the address below or ISOs member body in the country of the requester. IS0 copyright office Case postale 56 CH-121 1 Geneva 20 Tel. + 41 22 749 O1 11 Fax +41227341079 E-mail copynght8iso.ch Web www.iso.ch Printed in Switzerland O ISOAEC 1999 -

19、All rights resewed STD-IS0 15775-ENGL 1999 = 485L903 0808599 828 ISO/IEC 1577531 999(E) Foreword IS0 (the International Organization for Standardization) and IEC (the International Electrotechnical Commission) form the specialized system for worldwide standardization. National bodies that are member

20、s of IS0 or IEC participate in the development of International Standards through technical committees established by the respective organization to deal with particular fields of technical activity. IS0 and IEC technical committees collaborate in fields of mutual interest. Other international organ

21、izations, governmental and non-governmental, in liaison with IS0 and IEC, also take part in the work. International Standards are drafted in accordance with the rules given in the ISOAEC Directives, Part 3. In the field of information technology, IS0 and IEC have established a joint technical commit

22、tee, ISO/IEC JTC 1. Draft International Standards adopted by the joint technical committee are circulated to national bodies for voting. Publication as an International Standard requires approval by at least 75 % of the national bodies casting a vote. Attention is drawn to the possibility that some

23、of the elements of this International Standard may be the subject of patent rights. IS0 and IEC shall not be held responsible for identifying any or all such patent rights. International Standard ISOAEC 15775 was prepared by DIN (as DIN 33866) and was adopted, under a special “fast-track procedure”,

24、 by Joint Technical Committee ISO/IEC JTC 1, Information technology, in parallel with its approval by national bodies of IS0 and IEC. Annexes A to M of this International Standard are for information only. O ISO/IEC 1999 -All rights reserved iii STD.ISO 15775-ENGL 1999 4851903 0808bOO 37T INTERNATIO

25、NAL STANDARD ISO/IEC 15775: 1999(E) Information technology - mice machines - Method of specifying image reproduction of colour copying machines by analog test charts - Realisation and application 1. Scope This International Standard applies to implementation and application of test charts for colour

26、 copying machines. This Intemational Standard serves for testing of reproduction properties of colour copying machines, in order to help to recognize the possibilities and limits of various machines and for their comparison. To use this International Standard, make copies of at least two test charts

27、 (one achromatic and one chromatic) out of eight test charts using the device to be tested. The resulting copies shall be examined visually and may be compared with the original test charts. Objective measurements may be made for these copies. Eight ISO-test charts, four in halftone (off set reprodu

28、ction) and four in continuous tone (photographic reproduction), belonging to this International Standard may be produced by different manufacturers. Information about where to obtain test chart layout and colorimetric L*a*b*data to produce the charts may be found in Annex M. All hard copy patterns (

29、analog test charts) produced according to this International Standard should be discarded after three years. 2. Normative References I The following normative documents contain provisions which, through reference in this text, constitute provisions of this International Standard. For dated reference

30、s, subsequent amendments to, or revisions of, any of these publications do not apply. However, parties to agreements based on this International Standard are encouraged to investigate the possiblibity of applying the most recent editions of the normative documents indicated below. For undated refere

31、nces, the latest edition of the normative document referred to applies. Members of IS0 and IEC maintain registers of currently valid International Standards. IS0 21 6: 1975, Writing paper and certain classes of printed matter - Trimmed sizes - A and B series. IS0 536:1995, Paper and board - Determin

32、ation of grammage. IS0 554: 1 976, Standard atmospheres for conditioning and/or testing - Specifications. IS0 2469:1994, Paper, board and pulps - Measurement of diffuse reflectance factor. IS0 2471 :1998, Paper and board - Determination of opacity (paper backing) - Diffuse reflectance method. IS0 28

33、46-1 :1997, Graphic technology - Colour and transparency of ink sets for four-colour-printing - Part I: Sheetfed and heat-set web offset lithographic printing. IS0 5627:1995, Paper and board - Determination of smoothness (Bekk method). IS0 5651 :1989, Paper board and pulps - Units for expressing pro

34、perties. IS0 5737:1983, Prints - Preparation of standard prints for optical tests. IS0 7724-1 :1984, Paints and varnishes - Colorimetry - Part 1: Principles. IS0 7724-3:1984, Paints and varnishes - Colorimetty - Part 3: Calculation of colour differences. IS0 8596:1994, Ophthalmic optics - Visual acu

35、ity testing - Standard optotype and its presentation. IS0 8597:1994, Optics and optical instruments - Visual acuity testing - Method of correlating optotypes. IS0 1 2641 : 1997, Graphic technology - Prepress digital data exchange - Colour targets for input scanner calibration. ISO/ClE 10526:1991, CI

36、E standard colorimetric illuminants. ISO/CIE 10527:1991, CIE standard colorimetric observers. CIE publ. 13.3:1995, Colour rendering - Method of Measuring and Specifying Colour Rendering Properties of Light Sources. CIE publ. 15.2:1986, Colorimetry. DIN 61 60:1996, Anomaloscopes for the diagnosis of red-green colour vision deficiencies (or equivalent). DIN 33866-2:1998, Information technology - Office machines - Colour image reproduction devices - Method of 1 Q ISOAEC 1999 - All rights reserved