ISO 27769-2016 Wood-based panels - Wet process fibreboard《木基板材 湿法纤维板》.pdf
《ISO 27769-2016 Wood-based panels - Wet process fibreboard《木基板材 湿法纤维板》.pdf》由会员分享,可在线阅读,更多相关《ISO 27769-2016 Wood-based panels - Wet process fibreboard《木基板材 湿法纤维板》.pdf(20页珍藏版)》请在麦多课文档分享上搜索。
1、 ISO 2016 Wood-based panels Wet process fibr eboar d Panneaux base de bois Panneau de fibres obtenu par procd humide INTERNATIONAL STANDARD ISO 27769 First edition 2016-12-15 Reference number ISO 27769:2016(E) ISO 27769:2016(E)ii ISO 2016 All rights reserved COPYRIGHT PROTECTED DOCUMENT ISO 2016, Pu
2、blished in Switzerland All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior written permission. Perm
3、ission can be requested from either ISO at the address below or ISOs member body in the country of the requester. ISO copyright office Ch. de Blandonnet 8 CP 401 CH-1214 Vernier, Geneva, Switzerland Tel. +41 22 749 01 11 Fax +41 22 749 09 47 copyrightiso.org www.iso.org ISO 27769:2016(E)Foreword iv
4、1 Scope . 1 2 Normati v e r efer enc es 1 3 T erms and definitions . 1 4 A bbr e viat ed t erms 2 5 Classifications, designation and c oding 2 5.1 General . 2 5.1.1 Classification matrices 2 5.1.2 Structural grades . 3 5.2 Softboards . 3 5.3 Hardboards 3 6 Mandat ory t ests r elating t o each gr ade
5、 4 6.1 General . 4 6.2 Softboards . 4 6.3 Hardboards 4 6.4 Supplementary properties 4 7 Thickness r anges 5 7.1 Specification values . 5 7.2 Softboards . 5 7.3 Hardboards 5 8 Expr ession of specification limits and gener al r equir ements 5 8.1 Expression of specification limits . 5 8.2 Lower specif
6、ication limits . 6 8.3 Upper specification limits 6 8.4 Density variation, dimension and moisture content requirements 6 9 R equir ements for soft boar ds 7 9.1 Requirements for general purpose softboard for use in dry conditions . 7 9.2 Requirements for general purpose softboard for use in humid co
7、nditions . 7 9.3 Requirements for general purpose softboard for use in high-humidity conditions . 7 9.4 Requirements for general purpose softboard for use in exterior conditions . 7 9.5 Requirements for load-bearing softboard for use in dry conditions . 8 9.6 Requirements for load-bearing softboard
8、for use in humid conditions 8 10 R equir ements for har dboar ds 8 10.1 Requirements for general purpose hardboard for use in dry conditions 8 10.2 Requirements for general purpose hardboard for use in humid conditions 9 10.3 Requirements for general purpose hardboard for use in high-humidity condit
9、ions . 9 10.4 Requirements for general purpose hardboard for use in exterior conditions . 9 10.5 Requirements for load-bearing hardboard for use in dry conditions 10 10.6 Requirements for load-bearing hardboard for use in humid conditions 10 Annex A (normative) Calculation of 5-per c entile and 95-p
10、er c entile v alues 12 Bibliogr aph y .14 ISO 2016 All rights reserved iii Contents Page ISO 27769:2016(E) Foreword ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is no
11、rmally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in
12、 the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. The procedures used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, Part 1. In particular
13、the different approval criteria needed for the different types of ISO documents should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives). Attention is drawn to the possibility that some of the elements of this do
14、cument may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of any patent rights identified during the development of the document will be in the Introduction and/or on the ISO list of patent declarations received (see www.iso.
15、org/patents). Any trade name used in this document is information given for the convenience of users and does not constitute an endorsement. For an explanation on the meaning of ISO specific terms and expressions related to conformit y assessment, as well as information about ISOs adherence to the W
16、orld Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT) see the following URL: www.iso.org/iso/foreword.html. The committee responsible for this document is ISO/TC 89, Wood-based panels, Subcommittee SC 01, Fibre boards. This first edition cancels and replaces ISO 27769-1:2
17、009 and ISO 27769-2:2009, which have been technically revised.iv ISO 2016 All rights reserved INTERNATIONAL ST ANDARD ISO 27769:2016(E) W ood-based panels W et pr oc ess fibr eboar d 1 Scope This document provides a classification matrix and related mandatory tests for two types of wet process fibre
18、board made from wood: softboards and hardboards and specifies the relevant manufacturing property requirements. NOTE 1 Wet process fibreboards are divided into three types: softboards, medium boards and hardboards. This document is not applicable to medium boards. NOTE 2 Fibreboards are broadly divi
19、ded into two groups based on the manufacturing process, namely the dry-process group and the wet process group. This document is not applicable to dry-process fibreboards (see ISO 16895). NOTE 3 The values listed in this document relate to product properties used to classify fibreboards into one of
20、the different types. The values are not characteristic values to be used for design purposes. When fibreboard is classified as load-bearing and nominated for structural applications, characteristic strength and stiffness values are established based upon testing in accordance with ISO 16572 or equiv
21、alent ASTM or EN Standards. Alternatively, for specific load-bearing applications (e.g. walls, roofs, floors and I-joist webs), the load-bearing fibreboard would meet the specific performance requirements for that intended application. 2 Normat i v e r efer en c es The following documents are referr
22、ed to in the text in such a way that some or all of their content constitutes requirements of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. ISO 3340, Fibre building boards
23、 Determination of sand content ISO 9426, Wood-based panels Determination of dimensions of panels ISO 9427, Wood-based panels Determination of density ISO 16978, Wood-based panels Determination of modulus of elasticity in bending and of bending strength ISO 16979, Wood-based panels Determination of m
24、oisture content ISO 16981, Wood-based panels Determination of surface soundness ISO 16983, Wood-based panels Determination of swelling in thickness after immersion in water ISO 16984, Wood-based panels Determination of tensile strength perpendicular to the plane of the panel ISO 16985, Wood-based pa
- 1.请仔细阅读文档,确保文档完整性,对于不预览、不比对内容而直接下载带来的问题本站不予受理。
- 2.下载的文档,不会出现我们的网址水印。
- 3、该文档所得收入(下载+内容+预览)归上传者、原创作者;如果您是本文档原作者,请点此认领!既往收益都归您。
下载文档到电脑,查找使用更方便
10000 积分 0人已下载
下载 | 加入VIP,交流精品资源 |
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- ISO277692016WOODBASEDPANELSWETPROCESSFIBREBOARD 板材 湿法 纤维板 PDF
链接地址:http://www.mydoc123.com/p-1252970.html