IEEE C37 012 CORR 1-2016 en Guide for the Application of Capacitance Current Switching for AC High-Voltage Circuit Breakers above 1000 V Corrigendum 1《1000 V以上交.pdf

《IEEE C37 012 CORR 1-2016 en Guide for the Application of Capacitance Current Switching for AC High-Voltage Circuit Breakers above 1000 V Corrigendum 1《1000 V以上交.pdf》由会员分享，可在线阅读，更多相关《IEEE C37 012 CORR 1-2016 en Guide for the Application of Capacitance Current Switching for AC High-Voltage Circuit Breakers above 1000 V Corrigendum 1《1000 V以上交.pdf（16页珍藏版）》请在麦多课文档分享上搜索。

1、 IEEE Guide for the Application of Capacitance Current Switching for AC High-Voltage Circuit Breakers above 1000 V Corrigendum 1 Sponsored by the Switchgear Committee IEEE 3 Park Avenue New York, NY 10016-5997 USA IEEE Power and Energy Society IEEE Std C37.012-2014/Cor 1-2016 (Corrigendum to IEEE St

2、d C37.012-2014) IEEE Std C37.012-2014/Cor 1-2016 (Corrigendum to IEEE Std C37.012-2014) IEEE Guide for the Application of Capacitance Current Switching for AC High-Voltage Circuit Breakers above 1000 V Corrigendum 1 Sponsor Switchgear Committee of the IEEE Power and Energy Society Approved 29 Januar

3、y 2016 IEEE-SA Standards Board Copyright 2016 IEEE. All rights reserved. ii Abstract: This corrigendum addresses a change in Equation (26) and the list of variables belonging to this equation. Keywords: IEEE C37.012 The Institute of Electrical and Electronics Engineers, Inc. 3 Park Avenue, New York,

4、 NY 10016-5997, USA Copyright 2016 by The Institute of Electrical and Electronics Engineers, Inc. All rights reserved. Published 12 February 2016. Printed in the United States of America. IEEE is a registered trademark in the U.S. Patent fitness for a particular purpose; non-infringement; and qualit

5、y, accuracy, effectiveness, currency, or completeness of material. In addition, IEEE disclaims any and all conditions relating to: results; and workmanlike effort. IEEE standards documents are supplied “AS IS” and “WITH ALL FAULTS.” Use of an IEEE standard is wholly voluntary. The existence of an IE

6、EE standard does not imply that there are no other ways to produce, test, measure, purchase, market, or provide other goods and services related to the scope of the IEEE standard. Furthermore, the viewpoint expressed at the time a standard is approved and issued is subject to change brought about th

7、rough developments in the state of the art and comments received from users of the standard. In publishing and making its standards available, IEEE is not suggesting or rendering professional or other services for, or on behalf of, any person or entity nor is IEEE undertaking to perform any duty owe

8、d by any other person or entity to another. Any person utilizing any IEEE Standards document, should rely upon his or her own independent judgment in the exercise of reasonable care in any given circumstances or, as appropriate, seek the advice of a competent professional in determining the appropri

9、ateness of a given IEEE standard. IN NO EVENT SHALL IEEE BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO: PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED A

10、ND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE PUBLICATION, USE OF, OR RELIANCE UPON ANY STANDARD, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE AND REGARDLESS OF WHETHER SUCH DAMAGE WAS FORESEEABLE.

11、 Translations The IEEE consensus development process involves the review of documents in English only. In the event that an IEEE standard is translated, only the English version published by IEEE should be considered the approved IEEE standard. Copyright 2016 IEEE. All rights reserved. iii Official

12、statements A statement, written or oral, that is not processed in accordance with the IEEE-SA Standards Board Operations Manual shall not be considered or inferred to be the official position of IEEE or any of its committees and shall not be considered to be, or be relied upon as, a formal position

13、of IEEE. At lectures, symposia, seminars, or educational courses, an individual presenting information on IEEE standards shall make it clear that his or her views should be considered the personal views of that individual rather than the formal position of IEEE. Comments on standards Comments for re

14、vision of IEEE Standards documents are welcome from any interested party, regardless of membership affiliation with IEEE. However, IEEE does not provide consulting information or advice pertaining to IEEE Standards documents. Suggestions for changes in documents should be in the form of a proposed c

15、hange of text, together with appropriate supporting comments. Since IEEE standards represent a consensus of concerned interests, it is important that any responses to comments and questions also receive the concurrence of a balance of interests. For this reason, IEEE and the members of its societies

16、 and Standards Coordinating Committees are not able to provide an instant response to comments or questions except in those cases where the matter has previously been addressed. For the same reason, IEEE does not respond to interpretation requests. Any person who would like to participate in revisio

17、ns to an IEEE standard is welcome to join the relevant IEEE working group. Comments on standards should be submitted to the following address: Secretary, IEEE-SA Standards Board 445 Hoes Lane Piscataway, NJ 08854 USA Laws and regulations Users of IEEE Standards documents should consult all applicabl

18、e laws and regulations. Compliance with the provisions of any IEEE Standards document does not imply compliance to any applicable regulatory requirements. Implementers of the standard are responsible for observing or referring to the applicable regulatory requirements. IEEE does not, by the publicat

19、ion of its standards, intend to urge action that is not in compliance with applicable laws, and these documents may not be construed as doing so. Copyrights IEEE draft and approved standards are copyrighted by IEEE under U.S. and international copyright laws. They are made available by IEEE and are

20、adopted for a wide variety of both public and private uses. These include both use, by reference, in laws and regulations, and use in private self-regulation, standardization, and the promotion of engineering practices and methods. By making these documents available for use and adoption by public a

21、uthorities and private users, IEEE does not waive any rights in copyright to the documents. Photocopies Subject to payment of the appropriate fee, IEEE will grant users a limited, non-exclusive license to photocopy portions of any individual standard for company or organizational internal use or ind

22、ividual, non-commercial use only. To arrange for payment of licensing fees, please contact Copyright Clearance Center, Customer Service, 222 Rosewood Drive, Danvers, MA 01923 USA; +1 978 750 8400. Permission to photocopy portions of any individual standard for educational classroom use can also be o

23、btained through the Copyright Clearance Center. Copyright 2016 IEEE. All rights reserved. iv Updating of IEEE Standards documents Users of IEEE Standards documents should be aware that these documents may be superseded at any time by the issuance of new editions or may be amended from time to time t

24、hrough the issuance of amendments, corrigenda, or errata. An official IEEE document at any point in time consists of the current edition of the document together with any amendments, corrigenda, or errata then in effect. Every IEEE standard is subjected to review at least every ten years. When a doc

25、ument is more than ten years old and has not undergone a revision process, it is reasonable to conclude that its contents, although still of some value, do not wholly reflect the present state of the art. Users are cautioned to check to determine that they have the latest edition of any IEEE standar

26、d. In order to determine whether a given document is the current edition and whether it has been amended through the issuance of amendments, corrigenda, or errata, visit the IEEE-SA Website at http:/ieeexplore.ieee.org/xpl/standards.jsp or contact IEEE at the address listed previously. For more info

27、rmation about the IEEE SA or IEEEs standards development process, visit the IEEE-SA Website at http:/standards.ieee.org. Errata Errata, if any, for all IEEE standards can be accessed on the IEEE-SA Website at the following URL: http:/standards.ieee.org/findstds/errata/index.html. Users are encourage

28、d to check this URL for errata periodically. Patents Attention is called to the possibility that implementation of this standard may require use of subject matter covered by patent rights. By publication of this standard, no position is taken by the IEEE with respect to the existence or validity of

29、any patent rights in connection therewith. If a patent holder or patent applicant has filed a statement of assurance via an Accepted Letter of Assurance, then the statement is listed on the IEEE-SA Website at http:/standards.ieee.org/about/sasb/patcom/patents.html. Letters of Assurance may indicate

30、whether the Submitter is willing or unwilling to grant licenses under patent rights without compensation or under reasonable rates, with reasonable terms and conditions that are demonstrably free of any unfair discrimination to applicants desiring to obtain such licenses. Essential Patent Claims may

31、 exist for which a Letter of Assurance has not been received. The IEEE is not responsible for identifying Essential Patent Claims for which a license may be required, for conducting inquiries into the legal validity or scope of Patents Claims, or determining whether any licensing terms or conditions

32、 provided in connection with submission of a Letter of Assurance, if any, or in any licensing agreements are reasonable or non-discriminatory. Users of this standard are expressly advised that determination of the validity of any patent rights, and the risk of infringement of such rights, is entirel

33、y their own responsibility. Further information may be obtained from the IEEE Standards Association.Copyright 2016 IEEE. All rights reserved. v Participants At the time this draft guide was submitted to the IEEE-SA Standards Board for approval, the Switchgear Committee Working Group had the followin

34、g membership: Anne Bosma, Chair Roy Alexander, Vice Chair Mehmet Adanur Mauricio Aristizabal Katrin Baeuml W. J. (Bill) Bergman Stan Billings Arben Bufi Gilbert Carmona Stephen Cary Steven Chen Chih Chow Lucas Collette Michael Crawford Denis Dufournet Douglas Edwards Kenneth Edwards Leslie Falkingha

35、m Keith Flowers John Hall Helmut Heiermeier Victor Hermosillo Stephen Lambert David Lemmerman Hua Ying Liu Li Liu Albert Livshitz Antonio Mannarino Thomas Mulcahy Jeffrey Nelson Mirko Palazzo Jon Rogers Devki Sharma Sushil Shinde Michael Skidmore John Webb Jan Weisker Xi Zhu The following members of

36、 the individual balloting committee voted on this guide. Balloters may have voted for approval, disapproval, or abstention. Roy Alexander Mauricio Aristizabal Roy Ayers Thomas Barnes George Becker Craig Befus W.J. (Bill) Bergman Jean-Marc Biasse Wallace Binder William Bloethe Anne Bosma Jeffrey Brog

37、don John Brunke Ted Burse Paul Cardinal Stephen Cary Chih Chow Lucas Collette Michael Crawford Gary Donner Edgar Dullni Jerry Earl Douglas J Edwards Sergio Flores Frank Gerleve David Gilmer Mietek Glinkowski Randall Groves John Harder John Harley Helmut Heiermeier Victor Hermosillo Todd Irwin Richar

38、d Jackson Song Jin Laszlo Kadar Jeffrey Kester Yuri Khersonsky James Kinney J Koepfinger Jim Kulchisky Chung-Yiu Lam Benjamin Lanz Yuan Liao Hua Liu Frank Mayle Omar Mazzoni Peter Meyer Thomas Mulcahy Dennis Neitzel Michael Newman Joe Nims T. W. Olsen Lorraine Padden Mirko Palazzo K. James Phillips

39、Iulian Profir Reynaldo Ramos Timothy Robirds Charles Rogers Joseph Rostron Thomas Rozek Bartien Sayogo Nikunj Shah Devki Sharma Sushil Shinde Michael Skidmore Jeremy Smith Jerry Smith R Kirkland Smith Donald Swing Marcelo Valdes Roger Verdolin John Vergis John Webb Jan Weisker Kenneth White Matthew

40、Williford Terry Woodyard Larry Yonce Richard York Jian Yu Copyright 2016 IEEE. All rights reserved. vi vii Copyright 2016 IEEE. All rights reserved. When the IEEE-SA Standards Board approved this guide on 29 January 2016, it had the following membership: Jean-Philippe Faure, Chair Vacant, Vice Chair

41、 John D. Kulick, Past Chair Konstantinos Karachalios, Secretary Chuck Adams Masayuki Ariyoshi Ted Burse Stephen Dukes Jianbin Fan Ronald W. Hotchkiss J. Travis Griffith Gary Hoffman Michael Janezic Joseph L. Koepfinger* Hung Ling Kevin Lu Gary Robinson Annette D. Reilly Mehmet Ulema Yingli Wen Howar

42、d Wolfman Don Wright Yu Yuan Daidi Zhong *Member Emeritus viii Copyright 2016 IEEE. All rights reserved. Introduction This introduction is not part of IEEE Std C37.012-2014/Cor 1-2016, IEEE Guide for the Application of Capacitance Current Switching for AC High-Voltage Circuit Breakers above 1000 VCo

43、rrigendum 1. This corrigendum addresses a change in Equation (26) and the list of variables belonging to this equation. At the meeting of the High Voltage Circuit Breaker Subcommittee held on April 29, 2015 in St. Pete beach the decision was made that the factor “9.5” in Equation (26) will not be changed despite the fact that it is closer to 9.6.