IEEE 488-2-2004 en Standard digital interface for programmable instrumentation Part 2 Codes formats protocols and common commands (Replaces IEEE 488 2)《可编程仪表用标准.pdf

《IEEE 488-2-2004 en Standard digital interface for programmable instrumentation Part 2 Codes formats protocols and common commands (Replaces IEEE 488 2)《可编程仪表用标准.pdf》由会员分享，可在线阅读，更多相关《IEEE 488-2-2004 en Standard digital interface for programmable instrumentation Part 2 Codes formats protocols and common commands (Replaces IEEE 488 2)《可编程仪表用标准.pdf（264页珍藏版）》请在麦多课文档分享上搜索。

1、INTERNATIONAL STANDARD IEC60488-2First edition2004-05IEEE 488.2 Standard digital interface for programmable instrumentation Part 2: Codes, formats, protocols and common commands Reference number IEC 60488-2(E):2004 IEEE Std. 488.2(E):1992 Publication numbering As from 1 January 1997 all IEC publicat

2、ions are issued with a designation in the 60000 series. For example, IEC 34-1 is now referred to as IEC 60034-1. Consolidated editions The IEC is now publishing consolidated versions of its publications. For example, edition numbers 1.0, 1.1 and 1.2 refer, respectively, to the base publication, the

3、base publication incorporating amendment 1 and the base publication incorporating amendments 1 and 2. Further information on IEC publications The technical content of IEC publications is kept under constant review by the IEC, thus ensuring that the content reflects current technology. Information re

4、lating to this publication, including its validity, is available in the IEC Catalogue of publications (see below) in addition to new editions, amendments and corrigenda. Information on the subjects under consideration and work in progress undertaken by the technical committee which has prepared this

5、 publication, as well as the list of publications issued, is also available from the following: IEC Web Site (www.iec.ch) Catalogue of IEC publications The on-line catalogue on the IEC web site (www.iec.ch/searchpub) enables you to search by a variety of criteria including text searches, technical c

6、ommittees and date of publication. On-line information is also available on recently issued publications, withdrawn and replaced publications, as well as corrigenda. IEC Just Published This summary of recently issued publications (www.iec.ch/online_news/ justpub) is also available by email. Please c

7、ontact the Customer Service Centre (see below) for further information. Customer Service Centre If you have any questions regarding this publication or need further assistance, please contact the Customer Service Centre: Email: custserviec.chTel: +41 22 919 02 11 Fax: +41 22 919 03 00 INTERNATIONAL

8、STANDARD IEC60488-2First edition2004-05IEEE 488.2 Standard digital interface for programmable instrumentation Part 2: Codes, formats, protocols and common commands IEEE 2004 Copyright - all rights reserved IEEE is a registered trademark in the U.S. Patent any IEC National Committee interested in the

9、 subject dealt with may participate in this preparatory work. International, governmental and non-governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with condition

10、s determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National

11、 Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in

12、 which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Pub

13、lication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any equipment declared to be in conformity with an IEC Publication. 6) Attention is drawn to

14、the possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. International Standard IEC/IEEE 60488-2 has been processed through subcommittee 65C: Digital communications, of IEC

15、technical committee 65: Industrial-process measurement and control. This standard cancels and replaces the second edition of IEC 60625-2 (1993). At times in this standard, specific reference is made to IEEE Std 488.1:1987, which constituted an earlier version of IEEE Std 488.1:2003, the IEEE edition

16、 upon which IEC/IEEE 60488-1:2004 is based. Where specific dated references were made to the 1987 edition, these references have been maintained. The text of this standard is based on the following documents: IEEE Std FDIS Report on voting 488.2 (1992) 65C/320/FDIS 65C/326/RVD Full information on th

17、e voting for the approval of this standard can be found in the report on voting indicated in the above table. This publication has been drafted in accordance with the ISO/IEC Directives. The committee has decided that the contents of this publication will remain unchanged until 2009. IEC/IEEE 60488

18、consists of the following publications: Higher performance protocol for the standard digital interface for programmable instrumentation Part 1: General (60488-1). Standard digital interface for programmable instrumentation Part 2: Codes, formats, protocols and common commands (60488-2). IEC 60488-2:

19、2004(E)IEEE 488.2-1992(E) 6 Published by IEC under licence from IEEE. 1992 IEEE. All rights reserved. IEC/IEEE Dual Logo International Standards This Dual Logo International Standard is the result of an agreement between the IEC and the Institute of Electrical and Electronics Engineers, Inc. (IEEE).

20、 The original IEEE Standard was submitted to the IEC for consideration under the agreement, and the resulting IEC/IEEE Dual Logo International Standard has been published in accordance with the ISO/IEC Directives. IEEE Standards documents are developed within the IEEE Societies and the Standards Coo

21、rdinating Committees of the IEEE Standards Association (IEEE-SA) Standards Board. The IEEE develops its standards through a consensus development process, approved by the American National Standards Institute, which brings together volunteers representing varied viewpoints and interests to achieve t

22、he final product. Volunteers are not necessarily members of the Institute and serve without compensation. While the IEEE administers the process and establishes rules to promote fairness in the consensus development process, the IEEE does not independently evaluate, test, or verify the accuracy of a

23、ny of the information contained in its standards. Use of an IEC/IEEE Dual Logo International Standard is wholly voluntary. The IEC and IEEE disclaim liability for any personal injury, property or other damage, of any nature whatsoever, whether special, indirect, consequential, or compensatory, direc

24、tly or indirectly resulting from the publication, use of, or reliance upon this, or any other IEC or IEEE Standard document. The IEC and IEEE do not warrant or represent the accuracy or content of the material contained herein, and expressly disclaim any express or implied warranty, including any im

25、plied warranty of merchantability or fitness for a specific purpose, or that the use of the material contained herein is free from patent infringement. IEC/IEEE Dual Logo International Standards documents are supplied “AS IS”. The existence of an IEC/IEEE Dual Logo International Standard does not im

26、ply that there are no other ways to produce, test, measure, purchase, market, or provide other goods and services related to the scope of the IEC/IEEE Dual Logo International Standard. Furthermore, the viewpoint expressed at the time a standard is approved and issued is subject to change brought abo

27、ut through developments in the state of the art and comments received from users of the standard. Every IEEE Standard is subjected to review at least every five years for revision or reaffirmation. When a document is more than five years old and has not been reaffirmed, it is reasonable to conclude

28、that its contents, although still of some value, do not wholly reflect the present state of the art. Users are cautioned to check to determine that they have the latest edition of any IEEE Standard. In publishing and making this document available, the IEC and IEEE are not suggesting or rendering pr

29、ofessional or other services for, or on behalf of, any person or entity. Neither the IEC nor IEEE is undertaking to perform any duty owed by any other person or entity to another. Any person utilizing this, and any other IEC/IEEE Dual Logo International Standards or IEEE Standards document, should r

30、ely upon the advice of a competent professional in determining the exercise of reasonable care in any given circumstances. Interpretations Occasionally questions may arise regarding the meaning of portions of standards as they relate to specific applications. When the need for interpretations is bro

31、ught to the attention of IEEE, the Institute will initiate action to prepare appropriate responses. Since IEEE Standards represent a consensus of concerned interests, it is important to ensure that any interpretation has also received the concurrence of a balance of interests. For this reason, IEEE

32、and the members of its societies and Standards Coordinating Committees are not able to provide an instant response to interpretation requests except in those cases where the matter has previously received formal consideration. Comments for revision of IEC/IEEE Dual Logo International Standards are w

33、elcome from any interested party, regardless of membership affiliation with the IEC or IEEE. Suggestions for changes in documents should be in the form of a proposed change of text, together with appropriate supporting comments. Comments on standards and requests for interpretations should be addres

34、sed to: Secretary, IEEE-SA Standards Board, 445 Hoes Lane, P.O. Box 1331, Piscataway, NJ 08855-1331, USA and/or General Secretary, IEC, 3, rue de Varemb, PO Box 131, 1211 Geneva 20, Switzerland. Authorization to photocopy portions of any individual standard for internal or personal use is granted by

35、 the Institute of Electrical and Electronics Engineers, Inc., provided that the appropriate fee is paid to Copyright Clearance Center. To arrange for payment of licensing fee, please contact Copyright Clearance Center, Customer Service, 222 Rosewood Drive, Danvers, MA 01923 USA; +1 978 750 8400. Per

36、mission to photocopy portions of any individual standard for educational classroom use can also be obtained through the Copyright Clearance Center. NOTE Attention is called to the possibility that implementation of this standard may require use of subject matter covered by patent rights. By publicat

37、ion of this standard, no position is taken with respect to the existence or validity of any patent rights in connection therewith. The IEEE shall not be responsible for identifying patents for which a license may be required by an IEEE standard or for conducting inquiries into the legal validity or

38、scope of those patents that are brought to its attention. IEC 60488-2:2004(E)IEEE 488.2-1992(E) 7 Published by IEC under licence from IEEE. 1992 IEEE. All rights reserved. 6SRQVRU$XWRPDWHG,QVWUXPHQWDWLRQ35(66,215(63216($7$!HOHPHQWWKHHSDQGHGXVHRI68),;352*5$0$7$!WKHDGGLWLRQRIWKH 50$PHULFDQ1DWLRQDO6WDQ

39、GDUG$PHULFDQ1DWLRQDO6WDQGDUG5HSUHVHQWDWLRQRI1XPHULF9DOXHVLQ&KDUDFWHU6WULQJVIRU,QIRUPDWLRQ,QWHUFKDQJH,(6WG 5HDII ,(6WDQGDUG/HWWHU6PEROVIRU8QLWVRI0HDVXUHPHQW 6,8QLWV&XVWRPDU,QFK3RXQG8QLWVDQG&HUWDLQ2WKHU8QLWV $16,R ,(6WG,(6WDQGDUGLJLWDO,QWHUIDFHIRU3URJUDPPDEOH,QVWUXPHQWDWLRQ $16, $16,SXEOLFDWLRQVDUHDYD

40、LODEOHIURPWKH6DOHVHSDUWPHQW$PHULFDQ1DWLRQDO6WDQGDUGV,QVWLWXWH:HVWQG6WUHHWWK)ORRU1HZ,(6WG 5HDII ,(6WDQGDUGIRU%LQDU)ORDWLQJ3RLQW$ULWKPHWLF,624XDQWLWLHVDQGXQLWV3DUW6SDFHDQGWL PH,624XDQLWLHVDQGXQLWV3DUW3HULRGLFDQG UHODWHGSKHQRPHQD,624XDQWLWLHVDQGXQLWV3DUW0HFKDQLFV,624XDQLWLWHVDQGXQLWV3DUW+HDW,624XDQLWLW

41、HVDQGXQLWV3DUW(OHFWULFLW DQGPDJQHWLVP,624XDQWLWLHVDQGXQLWV3DUW/LJKWDQGU HODWHGHOHFWURPDJQHWLFUDGLDWLRQV,624XDQWLWLHVDQGXQLWV3DUW$FRXVWLFV,624XDQWLWLHVDQGXQLWV3DUW3KVLFDOF KHPLVWUDQGPROHFXODUSKVLFV,624XDQWLWLHVDQGXQLWV3DUW$WRPLFDQG QXFOHDUSKVLFV,624XDQWLWLHVDQGXQLWV3DUW1XFOHDUU HDFWLRQVDQGLRQLLQJUDGLDWLRQV,624XDQWLWLHVDQGXQLWV3DUW0DWKHPDWL FDOVLJQVDQGVPEROVIRUXVHLQWKHSKVLFDOVFLHQFHVDQGWHFKQRORJ,624XDQWLWLHVDQGXQLWV3DUW&KDUDFWHU LVWLFQXPEHUV,621992 6,XQLWVDQGUHFRPPHQGDWLRQVIRUWKHXVHRIWKHLU