IEEE 421 6-2017 en Recommended Practice for the Specification and Design of Field Discharge Equipment for Synchronous Machines.pdf

《IEEE 421 6-2017 en Recommended Practice for the Specification and Design of Field Discharge Equipment for Synchronous Machines.pdf》由会员分享，可在线阅读，更多相关《IEEE 421 6-2017 en Recommended Practice for the Specification and Design of Field Discharge Equipment for Synchronous Machines.pdf（38页珍藏版）》请在麦多课文档分享上搜索。

1、IEEE Recommended Practice for the Specification and Design of Field Discharge Equipment for Synchronous Machines IEEE Std 421.6-2017 IEEE Power and Energy Society Sponsored by the Energy Development and Power Generation Committee IEEE 3 Park Avenue New York, NY 10016-5997 USAIEEE Std 421.6-2017 IEEE

2、 Recommended Practice for the Specification and Design of Field Discharge Equipment for Synchronous Machines Sponsor Energy Development and Power Generation Committee of the IEEE Power and Energy Society Approved 23 March 2017 IEEE-SA Standards BoardAbstract: A basic reference for the speci cation a

3、nd design of eld discharge circuits for synchronous machines is provided in this document. Detailed information about eld discharge that complements standards IEEE Std 421.4-2004, IEEE Guide for Preparation of Excitation System Speci cation, and includes many aspects of the withdrawn standard ANSI/I

4、EEE C37.18-1979, IEEE Standard Enclosed Field Discharge Circuit Breakers, is also provided. This document shows the most employed eld discharge circuits and de nes the main design criteria and conditions for the main components of eld discharge circuit for synchronous machines. Keywords: crowbar, de

5、-excitation, eld breaker, eld discharge equipment, eld discharge of synchronous machines, eld discharge resistor, eld suppression, IEEE 421.6 The Institute of Electrical and Electronics Engineers, Inc. 3 Park Avenue, New York, NY 10016-5997, USA Copyright 2017 by The Institute of Electrical and Elec

6、tronics Engineers, Inc. All rights reserved. Published 9 June 2017. Printed in the United States of America. IEEE is a registered trademark in the U.S. Patent fitness for a particular purpose; non-infringement; and quality, accuracy, effectiveness, currency, or completeness of material. In addition,

7、 IEEE disclaims any and all conditions relating to: results; and workmanlike effort. IEEE standards documents are supplied “AS IS” and “WITH ALL FAULTS.” Use of an IEEE standard is wholly voluntary. The existence of an IEEE standard does not imply that there are no other ways to produce, test, measu

8、re, purchase, market, or provide other goods and services related to the scope of the IEEE standard. Furthermore, the viewpoint expressed at the time a standard is approved and issued is subject to change brought about through developments in the state of the art and comments received from users of

9、the standard. In publishing and making its standards available, IEEE is not suggesting or rendering professional or other services for, or on behalf of, any person or entity nor is IEEE undertaking to perform any duty owed by any other person or entity to another. Any person utilizing any IEEE Stand

10、ards document, should rely upon his or her own independent judgment in the exercise of reasonable care in any given circumstances or, as appropriate, seek the advice of a competent professional in determining the appropriateness of a given IEEE standard. IN NO EVENT SHALL IEEE BE LIABLE FOR ANY DIRE

11、CT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO: PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (

12、INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE PUBLICATION, USE OF, OR RELIANCE UPON ANY STANDARD, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE AND REGARDLESS OF WHETHER SUCH DAMAGE W AS FORESEEABLE.4 Copyright 2017 IEEE. All rights reserved. Translations The IEEE consensus de

13、velopment process involves the review of documents in English only. In the event that an IEEE standard is translated, only the English version published by IEEE should be considered the approved IEEE standard. Official statements A statement, written or oral, that is not processed in accordance with

14、 the IEEE-SA Standards Board Operations Manual shall not be considered or inferred to be the official position of IEEE or any of its committees and shall not be considered to be, or be relied upon as, a formal position of IEEE. At lectures, symposia, seminars, or educational courses, an individual p

15、resenting information on IEEE standards shall make it clear that his or her views should be considered the personal views of that individual rather than the formal position of IEEE. Comments on standards Comments for revision of IEEE Standards documents are welcome from any interested party, regardl

16、ess of membership affiliation with IEEE. However, IEEE does not provide consulting information or advice pertaining to IEEE Standards documents. Suggestions for changes in documents should be in the form of a proposed change of text, together with appropriate supporting comments. Since IEEE standard

17、s represent a consensus of concerned interests, it is important that any responses to comments and questions also receive the concurrence of a balance of interests. For this reason, IEEE and the members of its societies and Standards Coordinating Committees are not able to provide an instant respons

18、e to comments or questions except in those cases where the matter has previously been addressed. For the same reason, IEEE does not respond to interpretation requests. Any person who would like to participate in revisions to an IEEE standard is welcome to join the relevant IEEE working group. Commen

19、ts on standards should be submitted to the following address: Secretary, IEEE-SA Standards Board 445 Hoes Lane Piscataway, NJ 08854 USA Laws and regulations Users of IEEE Standards documents should consult all applicable laws and regulations. Compliance with the provisions of any IEEE Standards docu

20、ment does not imply compliance to any applicable regulatory requirements. Implementers of the standard are responsible for observing or referring to the applicable regulatory requirements. IEEE does not, by the publication of its standards, intend to urge action that is not in compliance with applic

21、able laws, and these documents may not be construed as doing so. Copyrights IEEE draft and approved standards are copyrighted by IEEE under US and international copyright laws. They are made available by IEEE and are adopted for a wide variety of both public and private uses. These include both use,

22、 by reference, in laws and regulations, and use in private self-regulation, standardization, and the promotion of engineering practices and methods. By making these documents available for use and adoption by public authorities and private users, IEEE does not waive any rights in copyright to the do

23、cuments.5 Copyright 2017 IEEE. All rights reserved. Photocopies Subject to payment of the appropriate fee, IEEE will grant users a limited, non-exclusive license to photocopy portions of any individual standard for company or organizational internal use or individual, non-commercial use only. To arr

24、ange for payment of licensing fees, please contact Copyright Clearance Center, Customer Service, 222 Rosewood Drive, Danvers, MA 01923 USA; +1 978 750 8400. Permission to photocopy portions of any individual standard for educational classroom use can also be obtained through the Copyright Clearance

25、Center. Updating of IEEE Standards documents Users of IEEE Standards documents should be aware that these documents may be superseded at any time by the issuance of new editions or may be amended from time to time through the issuance of amendments, corrigenda, or errata. An official IEEE document a

26、t any point in time consists of the current edition of the document together with any amendments, corrigenda, or errata then in effect. Every IEEE standard is subjected to review at least every 10 years. When a document is more than 10 years old and has not undergone a revision process, it is reason

27、able to conclude that its contents, although still of some value, do not wholly reflect the present state of the art. Users are cautioned to check to determine that they have the latest edition of any IEEE standard. In order to determine whether a given document is the current edition and whether it

28、 has been amended through the issuance of amendments, corrigenda, or errata, visit the IEEE Xplore at http:/ ieeexplore .ieee .or g/ or contact IEEE at the address listed previously. For more information about the IEEE-SA or IEEEs standards development process, visit the IEEE-SA Website at http:/ st

29、andards .ieee .or g. Errata Errata, if any, for all IEEE standards can be accessed on the IEEE-SA Website at the following URL: http:/ standards .ieee .org/ findstds/ errata/ index .html. Users are encouraged to check this URL for errata periodically. Patents Attention is called to the possibility t

30、hat implementation of this standard may require use of subject matter covered by patent rights. By publication of this standard, no position is taken by the IEEE with respect to the existence or validity of any patent rights in connection therewith. If a patent holder or patent applicant has filed a

31、 statement of assurance via an Accepted Letter of Assurance, then the statement is listed on the IEEE- SA Website at http:/ standards .ieee .or g/ about/ sasb/ patcom/ patents .html. Letters of Assurance may indicate whether the Submitter is willing or unwilling to grant licenses under patent rights

32、 without compensation or under reasonable rates, with reasonable terms and conditions that are demonstrably free of any unfair discrimination to applicants desiring to obtain such licenses. Essential Patent Claims may exist for which a Letter of Assurance has not been received. The IEEE is not respo

33、nsible for identifying Essential Patent Claims for which a license may be required, for conducting inquiries into the legal validity or scope of Patents Claims, or determining whether any licensing terms or conditions provided in connection with submission of a Letter of Assurance, if any, or in any

34、 licensing agreements are reasonable or non-discriminatory. Users of this standard are expressly advised that determination of the validity of any patent rights, and the risk of infringement of such rights, is entirely their own responsibility. Further information may be obtained from the IEEE Stand

35、ards Association.6 Copyright 2017 IEEE. All rights reserved. Participants At the time this IEEE recommended practice was completed, the Excitation Systems and Controls Subcommittee Working Group had the following membership: Robert Thorton-Jones, Chair Jos T aborda, Vice Chair Greg Anderson David Ap

36、ps Eugene Asbury Matthias Bchle Michael Basler Arnaud Beyer Murray Coultes Katherine Doyon Markus Egretzberger Michael Faltas Namal Fernando Alexander Glaninger-Katschnig Les Hajagos Gabriel Haynes Joseph Hurley Arish Kharel Kiyong Kim Ruediger Kutzner Eric Lambert Leonardo Lima Bill Maryniak Shawn

37、McMullen John Morrow Richard Mummert Ravi Mutukutti Pierre Ouellette Eli Pajuelo Shawn Patterson Bill Person Jeff Robertson Robert Rusch Richard Schaefer Uwe Seeger Paul Smulders David Thumser Eric V aughn Stephane Vignola The following members of the individual balloting committee voted on this rec

38、ommended practice. Balloters may have voted for approval, disapproval, or abstention. David Apps Eugene Asbury Matthias Bchle Michael Basler William Bloethe Andrew Brown Gustavo Brunello Luis Coronado Matthew Davis Gary Donner Donald Dunn Markus Egretzberger Namal Fernando Rostyslaw Fostiak Frank Ge

39、rleve Alexander Glaninger-Katschnig Randall Groves James Gurney Werner Hoelzl Joseph Hurley Richard Jackson Jim Kulchisky Andreas Kunkel Ruediger Kutzner Benjamin Lanz Albert Livshitz Lawrenc Long Omar Mazzoni Antonio Mejia Michael Newman Pierre Ouellette Eli Pajuelo Iulian Profir Richard Schaefer U

40、we Seeger Jeremy Smith Paul Smulders Jos Taborda David Thumser Eric Toft Eric V aughn John V ergis7 Copyright 2017 IEEE. All rights reserved. When the IEEE-SA Standards Board approved this recommended practice on 23 March 2017, it had the following membership: Jean-Philippe Faure, Chair Gary Hoffman

41、, Vice Chair John D. Kulick, Past Chair Konstantinos Karachalios, Secretary Chuck Adams Masayuki Ariyoshi Ted Burse Stephen Dukes Doug Edwards J. Travis Griffith Michael Janezic Thomas Koshy Joseph L. Koepfinger* Kevin Lu Daleep Mohla Damir Novosel Ronald C. Petersen Annette D. Reilly Robby Robson Dorothy Stanley Adrian Stephens Mehmet Ulema Phil Wennblom Howard Wolfman Y u Y uan *Member Emeritus