IEEE 4-2013 en High-Voltage Testing Techniques《高压试验技术用IEEE标准》.pdf

《IEEE 4-2013 en High-Voltage Testing Techniques《高压试验技术用IEEE标准》.pdf》由会员分享，可在线阅读，更多相关《IEEE 4-2013 en High-Voltage Testing Techniques《高压试验技术用IEEE标准》.pdf（213页珍藏版）》请在麦多课文档分享上搜索。

1、 IEEE Standard for High-Voltage Testing Techniques Sponsored by the Power System Instrumentation and Measurements Committee IEEE 3 Park Avenue New York, NY 10016-5997 USA 10 May 2013 IEEE Power and Energy Society IEEE Std 4-2013 (Revision of IEEE Std 4-1995) IEEE Std 4-2013 (Revision of IEEE Std 4-1

2、995) IEEE Standard for High-Voltage Testing Techniques Sponsor Power System Instrumentation and Measurements Committee of the IEEE Power and Energy Society Approved 6 March 2013 IEEE-SA Standards Board Abstract: Standard methods and basic techniques for high-voltage testing applicable to all types o

3、f apparatus for alternating voltages, direct voltages, lightning impulse voltages, switching impulse voltages, and impulse currents are established in this standard. Sections that deal with alternating voltage, direct voltage, and impulse testing are combined in this revision to organize the technic

4、al content for ease of use. In addition, the concept of measurement uncertainty in evaluation of high-voltage and high-current tests is introduced in this version. Keywords: atmospheric corrections, high-current testing, high-voltage measurements, high-voltage testing, IEEE 4TM, impulse currents, im

5、pulse voltages, testing The Institute of Electrical and Electronics Engineers, Inc. 3 Park Avenue, New York, NY 10016-5997, USA Copyright 2013 by The Institute of Electrical and Electronics Engineers, Inc. All rights reserved. Published 10 May 2013. Printed in the United States of America. IEEE is a

6、 registered trademark in the U.S. Patent +1 978 750 8400. Permission to photocopy portions of any individual standard for educational classroom use can also be obtained through the Copyright Clearance Center. Notice to users Laws and regulations Users of IEEE Standards documents should consult all a

7、pplicable laws and regulations. Compliance with the provisions of any IEEE Standards document does not imply compliance to any applicable regulatory requirements. Implementers of the standard are responsible for observing or referring to the applicable regulatory requirements. IEEE does not, by the

8、publication of its standards, intend to urge action that is not in compliance with applicable laws, and these documents may not be construed as doing so. Copyrights This document is copyrighted by the IEEE. It is made available for a wide variety of both public and private uses. These include both u

9、se, by reference, in laws and regulations, and use in private self-regulation, standardization, and the promotion of engineering practices and methods. By making this document available for use and adoption by public authorities and private users, the IEEE does not waive any rights in copyright to t

10、his document. Updating of IEEE documents Users of IEEE Standards documents should be aware that these documents may be superseded at any time by the issuance of new editions or may be amended from time to time through the issuance of amendments, corrigenda, or errata. An official IEEE document at an

11、y point in time consists of the current edition of the document together with any amendments, corrigenda, or errata then in effect. In order to determine whether a given document is the current edition and whether it has been amended through the issuance of amendments, corrigenda, or errata, visit t

12、he IEEE-SA Website at http:/standards.ieee.org/index.html or contact the IEEE at the address listed previously. For more information about the IEEE Standards Association or the IEEE standards development process, visit IEEE-SA Website at http:/standards.ieee.org/index.html. Errata Errata, if any, fo

13、r this and all other standards can be accessed at the following URL: http:/standards.ieee.org/findstds/errata/index.html. Users are encouraged to check this URL for errata periodically. Patents Attention is called to the possibility that implementation of this standard may require use of subject mat

14、ter covered by patent rights. By publication of this standard, no position is taken by the IEEE with respect to the existence or validity of any patent rights in connection therewith. If a patent holder or patent applicant has filed a statement of assurance via an Accepted Letter of Assurance, then

15、the statement is listed on the IEEE-SA Website at http:/standards.ieee.org/about/sasb/patcom/patents.html. Letters of Assurance may indicate whether the Submitter is willing or unwilling to grant licenses under patent rights without compensation or under reasonable rates, with reasonable terms and c

16、onditions that are demonstrably free of any unfair discrimination to applicants desiring to obtain such licenses. Copyright 2013 IEEE. All rights reserved. ivCopyright 2013 IEEE. All rights reserved. vEssential Patent Claims may exist for which a Letter of Assurance has not been received. The IEEE i

17、s not responsible for identifying Essential Patent Claims for which a license may be required, for conducting inquiries into the legal validity or scope of Patents Claims, or determining whether any licensing terms or conditions provided in connection with submission of a Letter of Assurance, if any

18、, or in any licensing agreements are reasonable or non-discriminatory. Users of this standard are expressly advised that determination of the validity of any patent rights, and the risk of infringement of such rights, is entirely their own responsibility. Further information may be obtained from the

19、 IEEE Standards Association. Participants At the time this IEEE standard was completed, the High Voltage Test Techniques Working Group had the following membership: William Larzelere, Chair Frank Blalock Jeffrey A. Britton Larry Coffeen Ross Daharsh Frank DeCesaro Dana Dufield Jari Hallstrom Jeffrey

20、 G. Hildreth Harold Kirkham Jack Kise John Kuffel William Larzelere Yi Li Kevin P. Loving James McBride Terry McComb Nigel P. McQuin Arthur Molden Randy Newnam Johannes Rickmann Juris Rungis Daniel Schweickart Stephen A. Sebo Mel Smith Eddy So May Wang Yixin Zhang The following members of the Standa

21、rds Association balloting committee voted on this standard. Balloters may have voted for approval, disapproval, or abstention. William Ackerman Michael Adams S. Aggarwal Roy Alexander Saleman Alibhay Stephen Antosz Anthony Baker Peter Balma Paul Barnhart Earle Bascom III Thomas Basso Martin Baur Bar

22、ry Beaster W.J. (Bill) Bergman Steven Bezner Wallace Binder Thomas Bishop Thomas Blackburn Frank Blalock Anne Bosma Kenneth Bow Harvey Bowles Jeffrey A. Britton Chris Brooks Gustavo Brunello Ted Burse Carl Bush William Bush Mark Bushnell William Byrd Paul Cardinal Michael Champagne Arvind K. Chaudha

23、ry Weijen Chen Robert Christman Larry Coffeen Michael Comber John Crouse Matthew Davis Frank DeCesaro Larry Dix Dieter Dohnal Carlo Donati Gary Donner Randall Dotson Louis Doucet Dana Dufield Denis Dufournet James Dymond Douglas Edwards Kenneth Edwards Fred Elliott Gary Engmann C. Erven Leslie Falki

24、ngham Jorge Fernandez Daher Keith Flowers Joseph Foldi Marcel Fortin Rostyslaw Fostiak Fredric Friend Paul Gaberson Robert Ganser George Gela Saurabh Ghosh David Giegel David Gilmer Douglas Giraud Mietek Glinkowski Waymon Goch Jalal Gohari Edwin Goodwin James Graham William Griesacker J. Travis Grif

25、fith Randall Groves Bal Gupta Ajit Gwal Said Hachichi Charles Hand Richard Harp David Harris Jeffrey Hartenberger Wolfgan Haverkamp Jeffrey Helzer Steven Hensley Lee Herron Scott Hietpas Lauri Hiivala Raymond Hill Werner Hoelzl David Horvath John Houdek A. Jones Andrew Jones Harry Josten Gael Kenned

26、y Sheldon Kennedy Vladimir Khalin Yuri Khersonsky Gary King Harold Kirkham Jack Kise J. Koepfinger Boris Kogan Neil Kranich Jim Kulchisky Saumen Kundu John Lackey Donald Laird Chung-Yiu Lam William Larzelere Michael Lauxman Aleksandr Levin Paul Lindemulder Gerald Liskom Hua Liu Copyright 2013 IEEE.

27、All rights reserved. viAlbert Livshitz William Lockley Larry Lowdermilk Greg Luri Arturo Maldonado Richard Marek J. Dennis Marlow Lee Matthews Michael Maytum Omar Mazzoni James McBride William McBride Thomas McCarthy Terry McComb William McCown William McDermid Nigel P. McQuin Joseph Melanson James

28、Michalec Michael Miller Arthur Molden Georges Montillet Jerry Murphy R. Murphy Ryan Musgrove K.R.M. Nair Dennis Neitzel Arthur Neubauer Michael S. Newman Joe Nims T. Olsen Carl Orde Lorraine Padden Mirko Palazzo Donald Parker Bansi Patel David Peelo Brian Penny Christopher Petrola Donald Platts Alva

29、ro Portillo Bertrand Poulin Lewis Powell Ulf Radbrandt Reynaldo Ramos Johannes Rickmann Pierre Riffon Michael Roberts Stephen Rodick John Rossetti Marnie Roussell Thomas Rozek Dinesh Sankarakurup Daniel Sauer Bartien Sayogo Gil Shultz Hyeong Sim Douglas Smith James Smith Jerry Smith Steve Snyder Edd

30、y So John Spare Nagu Srinivas David Stankes Gary Stoedter David Stone James Swank David Tepen Malcolm Thaden Peter Tirinzoni John Toth Remi Tremblay Eric Udren John Vergis Jane Verner Martin Von Herrmann Mark Walton Barry Ward Daniel Ward Joe Watson Peter Werelius Steven Whalen Kenneth White Ernesto

31、 Jorge Wiedenbrug Matthew Wilkowski Larry Yonce Jian Yu Dawn Zhao Tiebin Zhao Hugh Zhu Xi Zhu J. Zimnoch When the IEEE-SA Standards Board approved this standard on 6 March 2013, it had the following membership: John Kulick, Chair David J. Law, Vice Chair Richard H. Hulett, Past Chair Konstantinos Ka

32、rachalios, Secretary Masayuki Ariyoshi Peter Balma Farooq Bari Ted Burse Wael William Diab Stephen Dukes Jean-Philippe Faure Alexander Gelman Mark Halpin Gary Hoffman Paul Houz Jim Hughes Michael Janezic Joseph L. Koepfinger* Oleg Logvinov Ron Petersen Gary Robinson Jon Walter Rosdahl Adrian Stephen

33、s Peter Sutherland Yatin Trivedi Phil Winston Yu Yuan *Member Emeritus Also included are the following nonvoting IEEE-SA Standards Board liaisons: Richard DeBlasio, DOE Representative Michael Janezic, NIST Representative Patrick Gibbons IEEE Standards Program Manager, Document Development Malia Zama

34、n IEEE Standards Program Manager, Technical Program DevelopmentCopyright 2013 IEEE. All rights reserved. viiIntroduction This introduction is not part of IEEE Std 4-2013, IEEE Standard for High-Voltage Testing Techniques. The current revision of this standard is the eighth edition of this document a

35、s a separate standard. The subject had been addressed in the earliest standardization report of the American Institute of Electrical Engineers (AIEE) in 1889 and had been substantially elaborated upon in the subsequent reports issued from 1902 to 1933. When it was decided, in 1922, to reorganize the

36、 AIEEs standards into separate sections, the measurement of test voltages became one of the first subjects to be designated for a separate publication. The first edition was published in 1928. This standard establishes standard methods and basic techniques for high-voltage testing. The standard is a

37、pplicable to all types of apparatus for alternating voltages, direct voltages, lightning impulse voltages, switching impulse voltages, and impulse currents. The following standards have been used to prepare this document: IEC 60052, Recommendations for voltage measurement by means of standard air ga

38、ps. IEC 60060-1, High-voltage test techniquesPart 1: General definitions and test requirements. IEC 60060-2, High-voltage test techniquesPart 2: Measuring systems. IEC 60060-3, High-voltage test techniquesPart 3: Definitions and requirements for on-site testing. IEC 60270, Partial discharge measurem

39、ents. IEC 60507, Artificial pollution tests on high-voltage insulators to be used on a.c. systems. IEC 61083-1, Instruments and software used for measurement in high-voltage impulse testsPart 1: Requirements for instruments. IEC 61083-2, Digital recorders for measurements in high-voltage impulse tes

40、tsPart 2: Evaluation of software used for the determination of parameters of impulse waveforms. IEC 61245, Artificial pollution tests on high-voltage insulators to be used on d.c. systems. IEC 62475, High-current test techniques: Definitions and requirements for test currents and measuring systems.

41、ISO/IEC Guide 98-3, Uncertainty of measurementPart 3: Guide to the expression of uncertainty in measurements (GUM). For ease of use, this revision organizes the technical content in such a way as to combine sections that deal with alternating voltage, direct voltage, and impulse voltage testing. In

42、addition, this version introduces the concept of measurement uncertainty in evaluation of high-voltage and high-current tests. Copyright 2013 IEEE. All rights reserved. viiiContents 1. Overview 1 1.1 Scope . 1 1.2 Purpose 2 1.3 Application 2 2. Normative references 2 3. Definitions 2 4. Safety Aware

43、ness . 6 5. General requirements for high-voltage tests and measurements 6 5.1 Normal environmental conditions . 6 5.2 Arrangement of the test object. 6 5.3 Grounding requirements for high-voltage tests . 8 5.4 Use of properly dimensioned interconnections and electrodes 8 5.5 Susceptibility to noise

44、: instrumentation shielding . 9 5.6 Classification of measuring systems 10 5.7 Procedures for qualification and use of measuring systems 12 6. Tests and measurements with alternating voltage 20 6.1 Terms used to characterize alternating voltage tests and measurements . 20 6.2 Source requirements 21

45、6.3 Measuring system requirements for approved measuring systems 23 6.4 Test procedures 24 6.5 Type tests, acceptance tests, performance tests, and performance checks for alternating voltage measuring systems. 31 6.6 Additional information on alternating voltage test and measurement techniques . 33

46、7. Tests and measurements with direct voltage 36 7.1 Terms used to characterize direct voltage tests and measurements . 36 7.2 Source requirements 36 7.3 Measuring system requirements for approved measuring systems 37 7.4 Test procedures 38 7.5 Type tests, acceptance tests, performance tests, and pe

47、rformance checks for direct voltage measuring systems 39 7.6 Additional information on direct voltage test and measurement techniques . 42 8. Tests and measurements with impulse voltage. 45 8.1 Terms used to characterize impulse voltage tests and measurements 45 8.2 Source requirements 50 8.3 Measur

48、ing system requirements for approved measuring systems 52 8.4 Test procedures 55 8.5 Type tests, acceptance tests, performance tests, and performance checks for impulse voltage measuring systems. 57 8.6 Additional information on impulse voltage test and measurement techniques 60 8.7 Reference voltag

49、e divider 63 9. Test and measurements with impulse current. 67 9.1 Terms used to characterize impulse currents. 67 9.2 Source requirements 69 Copyright 2013 IEEE. All rights reserved. ix9.3 Measuring system requirements for approved measuring systems 70 9.4 Test Procedures 71 9.5 Type tests, acceptance tests, performance tests, and performance checks for impulse current measuring systems. 71 9.6 Additional information on impulse current measurement techniques . 74 10. Combined voltage and composite voltage tests 79 10.1 Combined voltage tests 79 10.2 Composite