IEEE 1685-2014 en IP-XACT Standard Structure for Packaging Integrating and Reusing IP within Tool Flows (IEEE Computer Society)《IP-XACT 机床流程内封装、集成和再利用互联网协议的标准结构.pdf

《IEEE 1685-2014 en IP-XACT Standard Structure for Packaging Integrating and Reusing IP within Tool Flows (IEEE Computer Society)《IP-XACT 机床流程内封装、集成和再利用互联网协议的标准结构.pdf》由会员分享，可在线阅读，更多相关《IEEE 1685-2014 en IP-XACT Standard Structure for Packaging Integrating and Reusing IP within Tool Flows (IEEE Computer Society)《IP-XACT 机床流程内封装、集成和再利用互联网协议的标准结构.pdf（510页珍藏版）》请在麦多课文档分享上搜索。

1、 IEEE Std 1685-2014(Revision ofIEEE Std 1685-2009)IEEE Standard for IP-XACT, Standard Structure for Packaging, Integrating, and Reusing IP within Tool FlowsSponsorDesign Automation Standards Committeeof theIEEE Computer SocietyApproved 12 June 2014IEEE-SA Standards BoardThe Institute of Electrical a

2、nd Electronics Engineers, Inc.3 Park Avenue, New York, NY 10016-5997, USACopyright 2014 by The Institute of Electrical and Electronics Engineers, Inc.All rights reserved. Published 12 September 2014. Printed in the United States of America.IEEE is a registered trademark in the U.S. Patent 9-26.html.

3、No part of this publication may be reproduced in any form, in an electronic retrieval system or otherwise, without the prior written permission of the publisher.Contributed updates to IEEE Std 1685-2009 from the Accellera Systems Initiative IP-XACT WorkingGroup are acknowledged.Abstract: Conformance

4、 checks for eXtensible Markup Language (XML) data designed to describeelectronic systems are formulated by this standard. The meta-data forms that are standardizedinclude components, systems, bus interfaces and connections, abstractions of those buses, anddetails of the components including address

5、maps, register and field descriptions, and file setdescriptions for use in automating design, verification, documentation, and use flows for electronicsystems. A set of XML schemas of the form described by the World Wide Web Consortium (W3C)and a set of semantic consistency rules (SCRs) are included

6、. A generator interface that is portableacross tool environments is provided. The specified combination of methodology-independentmeta-data and the tool-independent mechanism for accessing that data provides for portability ofdesign data, design methodologies, and environment implementations.Keyword

7、s: abstraction definitions, address space specification, bus definitions, designenvironment, EDA, electronic design automation, electronic system level, ESL, IEEE 1685,implementation constraints, IP-XACT, register transfer level, RTL, SCRs, semantic consistencyrules, TGI, tight generator interface,

8、tool and data interoperability, use models, XML design meta-data, XML schemaImportant Notices and Disclaimers Concerning IEEE Standards DocumentsIEEE documents are made available for use subject to important notices and legal disclaimers. These noticesand disclaimers, or a reference to this page, ap

9、pear in all standards and may be found under the heading“Important Notice” or “Important Notices and Disclaimers Concerning IEEE Standards Documents.”Notice and Disclaimer of Liability Concerning the Use of IEEE StandardsDocumentsIEEE Standards documents (standards, recommended practices, and guides

10、), both full-use and trial-use, aredeveloped within IEEE Societies and the Standards Coordinating Committees of the IEEE StandardsAssociation (“IEEE-SA”) Standards Board. IEEE (“the Institute”) develops its standards through aconsensus development process, approved by the American National Standards

11、 Institute (“ANSI”), whichbrings together volunteers representing varied viewpoints and interests to achieve the final product.Volunteers are not necessarily members of the Institute and participate without compensation from IEEE.While IEEE administers the process and establishes rules to promote fa

12、irness in the consensus developmentprocess, IEEE does not independently evaluate, test, or verify the accuracy of any of the information or thesoundness of any judgments contained in its standards.IEEE does not warrant or represent the accuracy or content of the material contained in its standards,

13、andexpressly disclaims all warranties (express, implied and statutory) not included in this or any otherdocument relating to the standard, including, but not limited to, the warranties of: merchantability; fitnessfor a particular purpose; non-infringement; and quality, accuracy, effectiveness, curre

14、ncy, or completenessof material. In addition, IEEE disclaims any and all conditions relating to: results; and workmanlike effort.IEEE standards documents are supplied “AS IS” and “WITH ALL FAULTS.”Use of an IEEE standard is wholly voluntary. The existence of an IEEE standard does not imply that ther

15、eare no other ways to produce, test, measure, purchase, market, or provide other goods and services related tothe scope of the IEEE standard. Furthermore, the viewpoint expressed at the time a standard is approved andissued is subject to change brought about through developments in the state of the

16、art and commentsreceived from users of the standard. In publishing and making its standards available, IEEE is not suggesting or rendering professional or otherservices for, or on behalf of, any person or entity nor is IEEE undertaking to perform any duty owed by anyother person or entity to another

17、. Any person utilizing any IEEE Standards document, should rely upon hisor her own independent judgment in the exercise of reasonable care in any given circumstances or, asappropriate, seek the advice of a competent professional in determining the appropriateness of a given IEEEstandard.IN NO EVENT

18、SHALL IEEE BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO:PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; ORBUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,WHETHER IN CONTRACT

19、, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OROTHERWISE) ARISING IN ANY WAY OUT OF THE PUBLICATION, USE OF, OR RELIANCEUPON ANY STANDARD, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE ANDREGARDLESS OF WHETHER SUCH DAMAGE WAS FORESEEABLE.Translations The IEEE consensus development process i

20、nvolves the review of documents in English only. In the eventthat an IEEE standard is translated, only the English version published by IEEE should be considered theapproved IEEE standard.Official statements A statement, written or oral, that is not processed in accordance with the IEEE-SA Standards

21、 BoardOperations Manual shall not be considered or inferred to be the official position of IEEE or any of itscommittees and shall not be considered to be, or be relied upon as, a formal position of IEEE. At lectures,symposia, seminars, or educational courses, an individual presenting information on

22、IEEE standards shallmake it clear that his or her views should be considered the personal views of that individual rather than theformal position of IEEE. Comments on standardsComments for revision of IEEE Standards documents are welcome from any interested party, regardless ofmembership affiliation

23、 with IEEE. However, IEEE does not provide consulting information or advicepertaining to IEEE Standards documents. Suggestions for changes in documents should be in the form of aproposed change of text, together with appropriate supporting comments. Since IEEE standards represent aconsensus of conce

24、rned interests, it is important that any responses to comments and questions also receivethe concurrence of a balance of interests. For this reason, IEEE and the members of its societies andStandards Coordinating Committees are not able to provide an instant response to comments or questionsexcept i

25、n those cases where the matter has previously been addressed. For the same reason, IEEE does notrespond to interpretation requests. Any person who would like to participate in revisions to an IEEEstandard is welcome to join the relevant IEEE working group.Comments on standards should be submitted to

26、 the following address:Secretary, IEEE-SA Standards Board 445 Hoes Lane Piscataway, NJ 08854 USALaws and regulations Users of IEEE Standards documents should consult all applicable laws and regulations. Compliance with theprovisions of any IEEE Standards document does not imply compliance to any app

27、licable regulatoryrequirements. Implementers of the standard are responsible for observing or referring to the applicableregulatory requirements. IEEE does not, by the publication of its standards, intend to urge action that is notin compliance with applicable laws, and these documents may not be co

28、nstrued as doing so.CopyrightsIEEE draft and approved standards are copyrighted by IEEE under U.S. and international copyright laws.They are made available by IEEE and are adopted for a wide variety of both public and private uses. Theseinclude both use, by reference, in laws and regulations, and us

29、e in private self-regulation, standardization,and the promotion of engineering practices and methods. By making these documents available for use andadoption by public authorities and private users, IEEE does not waive any rights in copyright to thedocuments.Photocopies Subject to payment of the app

30、ropriate fee, IEEE will grant users a limited, non-exclusive license tophotocopy portions of any individual standard for company or organizational internal use or individual,non-commercial use only. To arrange for payment of licensing fees, please contact Copyright ClearanceCenter, Customer Service,

31、 222 Rosewood Drive, Danvers, MA 01923 USA; +1 978 750 8400. Permission tophotocopy portions of any individual standard for educational classroom use can also be obtained throughthe Copyright Clearance Center.Updating of IEEE Standards documents Users of IEEE Standards documents should be aware that

32、 these documents may be superseded at any timeby the issuance of new editions or may be amended from time to time through the issuance of amendments,corrigenda, or errata. An official IEEE document at any point in time consists of the current edition of thedocument together with any amendments, corr

33、igenda, or errata then in effect. Every IEEE standard is subjected to review at least every ten years. When a document is more than ten yearsold and has not undergone a revision process, it is reasonable to conclude that its contents, although still ofsome value, do not wholly reflect the present st

34、ate of the art. Users are cautioned to check to determine thatthey have the latest edition of any IEEE standard.In order to determine whether a given document is the current edition and whether it has been amendedthrough the issuance of amendments, corrigenda, or errata, visit the IEEE-SA Website at

35、http:/ieeexplore.ieee.org/xpl/standards.jsp or contact IEEE at the address listed previously. For moreinformation about the IEEE SA or IEEEs standards development process, visit the IEEE-SA Website athttp:/standards.ieee.org.Errata Errata, if any, for all IEEE standards can be accessed on the IEEE-S

36、A Website at the following URL:http:/standards.ieee.org/findstds/errata/index.html. Users are encouraged to check this URL for errataperiodically.PatentsAttention is called to the possibility that implementation of this standard may require use of subject mattercovered by patent rights. By publicati

37、on of this standard, no position is taken by the IEEE with respect to theexistence or validity of any patent rights in connection therewith. If a patent holder or patent applicant hasfiled a statement of assurance via an Accepted Letter of Assurance, then the statement is listed on theIEEE-SA Websit

38、e at http:/standards.ieee.org/about/sasb/patcom/patents.html. Letters of Assurance mayindicate whether the Submitter is willing or unwilling to grant licenses under patent rights withoutcompensation or under reasonable rates, with reasonable terms and conditions that are demonstrably free ofany unfa

39、ir discrimination to applicants desiring to obtain such licenses.Essential Patent Claims may exist for which a Letter of Assurance has not been received. The IEEE is notresponsible for identifying Essential Patent Claims for which a license may be required, for conductinginquiries into the legal val

40、idity or scope of Patents Claims, or determining whether any licensing terms orconditions provided in connection with submission of a Letter of Assurance, if any, or in any licensingagreements are reasonable or non-discriminatory. Users of this standard are expressly advised thatdetermination of the

41、 validity of any patent rights, and the risk of infringement of such rights, is entirely theirown responsibility. Further information may be obtained from the IEEE Standards Association.vi Copyright 2014 IEEE. All rights reserved. ParticipantsThe IP-XACT Standardization Working Group is entity based

42、. At the time this standard was completed, theIP-XACT Standardization Working Group had the following membership:Mark Noll, ChairErwin de Kock, Vice ChairDavid Courtright, SecretaryJoe Daniels, Technical EditorThe following members of the entity balloting committee voted on this standard. Balloters

43、may have votedfor approval, disapproval, or abstention.When the IEEE-SA Standards Board approved this standard on 12 June 2014, it had the followingmembership:John Kulick, ChairJon Walter Rosdahl , Vice-chairRichard H. Hulett, Past ChairKonstantinos Karachalios, Secretary* Member EmeritusAlso includ

44、ed are the following nonvoting IEEE-SA Standards Board liaisons: Richard DeBlasio, DOE RepresentativeMichael Janezic, NIST RepresentativeDon MessinaIEEE-SA Content PublishingJoan WooleryIEEE-SA Standards Technical CommunityDavid CourtrightJoe DanielsEdwin DankertJean-Michel FernandezJeffery Griffith

45、sStephane GuntzPrashant KarandikarErwin de KockMark NollKamlesh PathakRichard WeberAccellera Organization, Inc.Advanced Micro Devices (AMD)Cadence Design Systems, Inc.Duolog Ltd.MAGILLEM LLCMentor GraphicsNXP SemiconductorsSemifore, Inc.STMicroelectronicsSynopsys, Inc.Texas Instruments IncorporatedP

46、eter BalmaFarooq BariTed BurseClint ChaplainStephen DukesJean-Phillippe FaureGary HoffmanMichael JanezicJeffrey KatzJoseph L. Koepfinger*David LawHung LingOleg LogvinovTed OlsenGlenn ParsonsRon PetersonAdrian StephensPeter SutherlandYatin TrivediPhil WinstonDon WrightYu YuanCopyright 2014 IEEE. All

47、rights reserved. viiIntroductionThe purpose of this standard is to provide the electronic design automation (EDA), semiconductor,electronic design intellectual property (IP) provider, and system design communities with a well-definedand unified specification for the meta-data that represents the com

48、ponents and designs within an electronicsystem. The goals of this specification are to enable delivery of compatible IP descriptions from multiple IPvendors; to improve the importing and exporting of complex IP bundles to, from, and between EDA toolsfor system on chip (SoC) design environments (DEs)

49、; to improve the expression of configurable IP by usingIP meta-data; and to improve the provision of EDA vendor-neutral IP creation and configuration scripts(generators). The data and data access specification is designed to coexist and enhance the hardwaredescription languages (HDLs) presently used by designers while providing capabilities lacking in thoselanguages.The SPIRIT Consortium, which originally developed the IP-XACT standard before merging with Accellera,was a consortium of electronic system, IP provider, semiconductor, and EDA companies. IP-XACT enablesa productivity