IEEE 1680 1-2018 en Environmental and Social Responsibility Assessment of Computers and Displays (IEEE Computer Society).pdf

《IEEE 1680 1-2018 en Environmental and Social Responsibility Assessment of Computers and Displays (IEEE Computer Society).pdf》由会员分享，可在线阅读，更多相关《IEEE 1680 1-2018 en Environmental and Social Responsibility Assessment of Computers and Displays (IEEE Computer Society).pdf（121页珍藏版）》请在麦多课文档分享上搜索。

1、 IEEE Standard for Environmental and Social Responsibility Assessment of Computers and Displays Sponsored by the Standards Activities Board IEEE 3 Park Avenue New York, NY 10016-5997 USA IEEE Computer Society IEEE Std 1680.1-2018 (Revision of IEEE Std 1680.1-2009) IEEE Std 1680.1-2018 (Revision of I

2、EEE Std 1680.1-2009) IEEE Standard for Environmental and Social Responsibility Assessment of Computers and Displays Sponsor Standards Activities Board of the IEEE Computer Society Approved 15 February 2018 IEEE-SA Standards Board 2 Abstract: A clear and consistent set of environmental and social res

3、ponsibility performance criteria for the design of computers (including notebook computers, desktop computers, integrated desktop computers, portable all-in-one computers, slates/tablets, small-scale servers, thin clients and workstations) and displays (including monitors and signage displays) is es

4、tablished, providing an opportunity for manufacturers to secure market recognition for their efforts. This standard is also intended to provide a tool for government, institutional, corporate, and consumer purchasers to identify products that demonstrate environmental and social responsibility leade

5、rship. This standard is intended to be updated and revised on a periodic basis to continue to set a higher performance standard for leadership products. Keywords: computer, desktop, display, electronic product, electronic product design, environment, environmental impact, environmental leadership, e

6、nvironmental performance, IEEE Std 1680.1, integrated desktop computer, monitor, notebook, portable all-in-one computer, slate/tablet, small-scale server, social responsibility, sustainability, thin client, workstation The Institute of Electrical and Electronics Engineers, Inc. 3 Park Avenue, New Yo

7、rk, NY 10016-5997, USA Copyright 2018 by The Institute of Electrical and Electronics Engineers, Inc. All rights reserved. Published 19 March 2018. Printed in the United States of America. IEEE is a registered trademark in the U.S. Patent and Trademark Office, owned by The Institute of Electrical and

8、 Electronics Engineers, Incorporated. PDF: ISBN 978-1-5044-4748-5 STDGT23038 Print: ISBN 978-1-5044-4749-2 STDPD23038 IEEE prohibits discrimination, harassment, and bullying. For more information, visit http:/www.ieee.org/web/aboutus/whatis/policies/p9-26.html. No part of this publication may be rep

9、roduced in any form, in an electronic retrieval system or otherwise, without the prior written permission of the publisher. 3 Important Notices and Disclaimers Concerning IEEE Standards Documents IEEE documents are made available for use subject to important notices and legal disclaimers. These noti

10、ces and disclaimers, or a reference to this page, appear in all standards and may be found under the heading “Important Notices and Disclaimers Concerning IEEE Standards Documents.” They can also be obtained on request from IEEE or viewed at http:/standards.ieee.org/IPR/disclaimers.html. Notice and

11、Disclaimer of Liability Concerning the Use of IEEE Standards Documents IEEE Standards documents (standards, recommended practices, and guides), both full-use and trial-use, are developed within IEEE Societies and the Standards Coordinating Committees of the IEEE Standards Association (“IEEE-SA”) Sta

12、ndards Board. IEEE (“the Institute”) develops its standards through a consensus development process, approved by the American National Standards Institute (“ANSI”), which brings together volunteers representing varied viewpoints and interests to achieve the final product. IEEE Standards are document

13、s developed through scientific, academic, and industry-based technical working groups. Volunteers in IEEE working groups are not necessarily members of the Institute and participate without compensation from IEEE. While IEEE administers the process and establishes rules to promote fairness in the co

14、nsensus development process, IEEE does not independently evaluate, test, or verify the accuracy of any of the information or the soundness of any judgments contained in its standards. IEEE Standards do not guarantee or ensure safety, security, health, or environmental protection, or ensure against i

15、nterference with or from other devices or networks. Implementers and users of IEEE Standards documents are responsible for determining and complying with all appropriate safety, security, environmental, health, and interference protection practices and all applicable laws and regulations. IEEE does

16、not warrant or represent the accuracy or content of the material contained in its standards, and expressly disclaims all warranties (express, implied and statutory) not included in this or any other document relating to the standard, including, but not limited to, the warranties of: merchantability;

17、 fitness for a particular purpose; non-infringement; and quality, accuracy, effectiveness, currency, or completeness of material. In addition, IEEE disclaims any and all conditions relating to: results; and workmanlike effort. IEEE standards documents are supplied “AS IS” and “WITH ALL FAULTS.” Use

18、of an IEEE standard is wholly voluntary. The existence of an IEEE standard does not imply that there are no other ways to produce, test, measure, purchase, market, or provide other goods and services related to the scope of the IEEE standard. Furthermore, the viewpoint expressed at the time a standa

19、rd is approved and issued is subject to change brought about through developments in the state of the art and comments received from users of the standard. In publishing and making its standards available, IEEE is not suggesting or rendering professional or other services for, or on behalf of, any p

20、erson or entity nor is IEEE undertaking to perform any duty owed by any other person or entity to another. Any person utilizing any IEEE Standards document, should rely upon his or her own independent judgment in the exercise of reasonable care in any given circumstances or, as appropriate, seek the

21、 advice of a competent professional in determining the appropriateness of a given IEEE standard. IN NO EVENT SHALL IEEE BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO: PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF US

22、E, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE PUBLICATION, USE OF, OR RELIANCE UPON ANY STANDARD, EVEN IF ADVISED OF THE POSSIBILITY OF SUC

23、H DAMAGE AND REGARDLESS OF WHETHER SUCH DAMAGE WAS FORESEEABLE. 4 Translations The IEEE consensus development process involves the review of documents in English only. In the event that an IEEE standard is translated, only the English version published by IEEE should be considered the approved IEEE

24、standard. Official statements A statement, written or oral, that is not processed in accordance with the IEEE-SA Standards Board Operations Manual shall not be considered or inferred to be the official position of IEEE or any of its committees and shall not be considered to be, or be relied upon as,

25、 a formal position of IEEE. At lectures, symposia, seminars, or educational courses, an individual presenting information on IEEE standards shall make it clear that his or her views should be considered the personal views of that individual rather than the formal position of IEEE. Comments on standa

26、rds Comments for revision of IEEE Standards documents are welcome from any interested party, regardless of membership affiliation with IEEE. However, IEEE does not provide consulting information or advice pertaining to IEEE Standards documents. Suggestions for changes in documents should be in the f

27、orm of a proposed change of text, together with appropriate supporting comments. Since IEEE standards represent a consensus of concerned interests, it is important that any responses to comments and questions also receive the concurrence of a balance of interests. For this reason, IEEE and the membe

28、rs of its societies and Standards Coordinating Committees are not able to provide an instant response to comments or questions except in those cases where the matter has previously been addressed. For the same reason, IEEE does not respond to interpretation requests. Any person who would like to par

29、ticipate in revisions to an IEEE standard is welcome to join the relevant IEEE working group. Comments on standards should be submitted to the following address: Secretary, IEEE-SA Standards Board 445 Hoes Lane Piscataway, NJ 08854 USA Laws and regulations Users of IEEE Standards documents should co

30、nsult all applicable laws and regulations. Compliance with the provisions of any IEEE Standards document does not imply compliance to any applicable regulatory requirements. Implementers of the standard are responsible for observing or referring to the applicable regulatory requirements. IEEE does n

31、ot, by the publication of its standards, intend to urge action that is not in compliance with applicable laws, and these documents may not be construed as doing so. Copyrights IEEE draft and approved standards are copyrighted by IEEE under U.S. and international copyright laws. They are made availab

32、le by IEEE and are adopted for a wide variety of both public and private uses. These include both use, by reference, in laws and regulations, and use in private self-regulation, standardization, and the promotion of engineering practices and methods. By making these documents available for use and a

33、doption by public authorities and private users, IEEE does not waive any rights in copyright to the documents. 5 Photocopies Subject to payment of the appropriate fee, IEEE will grant users a limited, non-exclusive license to photocopy portions of any individual standard for company or organizationa

34、l internal use or individual, non-commercial use only. To arrange for payment of licensing fees, please contact Copyright Clearance Center, Customer Service, 222 Rosewood Drive, Danvers, MA 01923 USA; +1 978 750 8400. Permission to photocopy portions of any individual standard for educational classr

35、oom use can also be obtained through the Copyright Clearance Center. Updating of IEEE Standards documents Users of IEEE Standards documents should be aware that these documents may be superseded at any time by the issuance of new editions or may be amended from time to time through the issuance of a

36、mendments, corrigenda, or errata. An official IEEE document at any point in time consists of the current edition of the document together with any amendments, corrigenda, or errata then in effect. Every IEEE standard is subjected to review at least every ten years. When a document is more than ten y

37、ears old and has not undergone a revision process, it is reasonable to conclude that its contents, although still of some value, do not wholly reflect the present state of the art. Users are cautioned to check to determine that they have the latest edition of any IEEE standard. In order to determine

38、 whether a given document is the current edition and whether it has been amended through the issuance of amendments, corrigenda, or errata, visit the IEEE Xplore at http:/ieeexplore.ieee.org/ or contact IEEE at the address listed previously. For more information about the IEEE-SA or IEEEs standards

39、development process, visit the IEEE-SA Website at http:/standards.ieee.org. Errata Errata, if any, for all IEEE standards can be accessed on the IEEE-SA Website at the following URL: http:/standards.ieee.org/findstds/errata/index.html. Users are encouraged to check this URL for errata periodically.

40、Patents Attention is called to the possibility that implementation of this standard may require use of subject matter covered by patent rights. By publication of this standard, no position is taken by the IEEE with respect to the existence or validity of any patent rights in connection therewith. If

41、 a patent holder or patent applicant has filed a statement of assurance via an Accepted Letter of Assurance, then the statement is listed on the IEEE-SA Website at http:/standards.ieee.org/about/sasb/patcom/patents.html. Letters of Assurance may indicate whether the Submitter is willing or unwilling

42、 to grant licenses under patent rights without compensation or under reasonable rates, with reasonable terms and conditions that are demonstrably free of any unfair discrimination to applicants desiring to obtain such licenses. Essential Patent Claims may exist for which a Letter of Assurance has no

43、t been received. The IEEE is not responsible for identifying Essential Patent Claims for which a license may be required, for conducting inquiries into the legal validity or scope of Patents Claims, or determining whether any licensing terms or conditions provided in connection with submission of a

44、Letter of Assurance, if any, or in any licensing agreements are reasonable or non-discriminatory. Users of this standard are expressly advised that determination of the validity of any patent rights, and the risk of infringement of such rights, is entirely their own responsibility. Further informati

45、on may be obtained from the IEEE Standards Association. Copyright 2018 IEEE. All rights reserved. 6 Participants At the time this IEEE standard was completed, the 1680.1 Working Group had the following membership: Walter Jager, Chair Alexandra Degher, Vice Chair Cassandra Robinson, Secretary Cate Be

46、rard Brandon Bray Pamela Brody-Heine Ralph Buoniconti Sandra Cannon Christopher Cleet Patricia Dillon Holly Elwood Holly Evans Dieter Feuerer Emma Gates Eric Gilbert Matthew Guthrie Chris Harney William Hoffman Kim Holliday Natalie Hummel Mary Jacques Chanil Jung John Katz Ted Knudson Richard P. Kro

47、ck Bill Leong Michael Morimoto Christopher Newman Mary-Rose Nguyen Glenn Paufler Karen Pollard Paul Reynolds Steve Risotto Lynn Rubinstein Donna Sadowy Mark Schaffer Paul Scheihing Steve Scherrer Sona Stenclova Kelly Stumbaugh Lucian Turk Bruce Turner Richard Vernam Doug Wetzig Jeffrey Wheeler Chris

48、tine Wu The following members of the balloting committee voted on this standard. Balloters may have voted for approval, disapproval, or abstention. Lennart Ask Bakul Banerjee Cate Berard Brandon Bray Pamela Brody-Heine Ralph Buoniconti Sandra Cannon Juan Carreon Keith Chow Christopher Cleet Jennifer

49、 Costley Sandy Crawford Jeannie Crowley Alexandra Degher Patricia Dillon Katherine Donner Sourav Dutta P. Eastman Holly Elwood Holly Evans Faridoon Ferhut Dieter Feuerer Emma Gates Eric Gilbert Eric W. Gray Randall Groves Matthew Guthrie Frank Hill Keiko Hirai Werner Hoelzl William Hoffman Kim Holliday Noriyuki Ikeuchi Atsushi Ito Mary Jacques Walter Jager Piotr Karocki John Katz Eugene Kim Ted Knudson Richard P. Krock David Leciston Joseph Marion Michael Morimoto Justin Murrill Christopher Newman Mary-Rose Nguyen Verena Radulovic Annette Reilly Paul Reynolds Steve Risotto Lynn