IEEE 1076 6-2005 en VHDL Register Transfer Level (RTL) synthesis (IEEE Computer Society document)《VHDL注册传输级(RTL)合成》.pdf
《IEEE 1076 6-2005 en VHDL Register Transfer Level (RTL) synthesis (IEEE Computer Society document)《VHDL注册传输级(RTL)合成》.pdf》由会员分享,可在线阅读,更多相关《IEEE 1076 6-2005 en VHDL Register Transfer Level (RTL) synthesis (IEEE Computer Society document)《VHDL注册传输级(RTL)合成》.pdf(128页珍藏版)》请在麦多课文档分享上搜索。
1、 INTERNATIONAL STANDARD IEC62050First edition2005-07IEEE 1076.6VHDL Register Transfer Level (RTL) synthesis Reference number IEC 62050(E):2005 IEEE Std. 1076.6(E):2004 Publication numbering As from 1 January 1997 all IEC publications are issued with a designation in the 60000 series. For example, IE
2、C 34-1 is now referred to as IEC 60034-1. Consolidated editions The IEC is now publishing consolidated versions of its publications. For example, edition numbers 1.0, 1.1 and 1.2 refer, respectively, to the base publication, the base publication incorporating amendment 1 and the base publication inc
3、orporating amendments 1 and 2. Further information on IEC publications The technical content of IEC publications is kept under constant review by the IEC, thus ensuring that the content reflects current technology. Information relating to this publication, including its validity, is available in the
4、 IEC Catalogue of publications (see below) in addition to new editions, amendments and corrigenda. Information on the subjects under consideration and work in progress undertaken by the technical committee which has prepared this publication, as well as the list of publications issued, is also avail
5、able from the following: IEC Web Site (www.iec.ch) Catalogue of IEC publications The on-line catalogue on the IEC web site (www.iec.ch/searchpub) enables you to search by a variety of criteria including text searches, technical committees and date of publication. On-line information is also availabl
6、e on recently issued publications, withdrawn and replaced publications, as well as corrigenda. IEC Just Published This summary of recently issued publications (www.iec.ch/online_news/ justpub) is also available by email. Please contact the Customer Service Centre (see below) for further information.
7、 Customer Service Centre If you have any questions regarding this publication or need further assistance, please contact the Customer Service Centre: Email: custserviec.ch Tel: +41 22 919 02 11 Fax: +41 22 919 03 00 VHDL Register Transfer Level (RTL) synthesis INTERNATIONAL STANDARD IEC62050First ed
8、ition2005-07IEEE 1076.6Commission Electrotechnique InternationaleInternational Electrotechnical Commission IEEE 2005 Copyright - all rights reserved IEEE is a registered trademark in the U.S. Patent any IEC National Committee interested in the subject dealt with may participate in this preparatory w
9、ork. International, governmental and non-governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations.
10、2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees. 3) IEC Publications have the form of recomme
11、ndations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any
12、end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publi
13、cation shall be clearly indicated in the latter. 5) IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any equipment declared to be in conformity with an IEC Publication. 6) Attention is drawn to the possibility that some of the elements of this IEC Pub
14、lication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. International Standard IEC/IEEE 62050 has been processed through IEC technical committee 93: Design automation. The text of this standard is based on the following documents
15、: IEEE Std FDIS Report on voting 1076.6 (2004) 93/212/FDIS 93/217/RVD Full information on the voting for the approval of this standard can be found in the report on voting indicated in the above table. This publication has been drafted in accordance with the ISO/IEC Directives. The committee has dec
16、ided that the contents of this publication will remain unchanged until 2009. “Attention! It should be noted that this International Standard IEC 62050 is totally unrelated to IEC/PAS 62050 despite the identical numbering.” IEC/IEEE Dual Logo International Standards This Dual Logo International Stand
17、ard is the result of an agreement between the IEC and the Institute of Electrical and Electronics Engineers, Inc. (IEEE). The original IEEE Standard was submitted to the IEC for consideration under the agreement, and the resulting IEC/IEEE Dual Logo International Standard has been published in accor
18、dance with the ISO/IEC Directives. IEEE Standards documents are developed within the IEEE Societies and the Standards Coordinating Committees of the IEEE Standards Association (IEEE-SA) Standards Board. The IEEE develops its standards through a consensus development process, approved by the American
19、 National Standards Institute, which brings together volunteers representing varied viewpoints and interests to achieve the final product. Volunteers are not necessarily members of the Institute and serve without compensation. While the IEEE administers the process and establishes rules to promote f
20、airness in the consensus development process, the IEEE does not independently evaluate, test, or verify the accuracy of any of the information contained in its standards. Use of an IEC/IEEE Dual Logo International Standard is wholly voluntary. The IEC and IEEE disclaim liability for any personal inj
21、ury, property or other damage, of any nature whatsoever, whether special, indirect, consequential, or compensatory, directly or indirectly resulting from the publication, use of, or reliance upon this, or any other IEC or IEEE Standard document. The IEC and IEEE do not warrant or represent the accur
22、acy or content of the material contained herein, and expressly disclaim any express or implied warranty, including any implied warranty of merchantability or fitness for a specific purpose, or that the use of the material contained herein is free from patent infringement. IEC/IEEE Dual Logo Internat
23、ional Standards documents are supplied “AS IS”. The existence of an IEC/IEEE Dual Logo International Standard does not imply that there are no other ways to produce, test, measure, purchase, market, or provide other goods and services related to the scope of the IEC/IEEE Dual Logo International Stan
24、dard. Furthermore, the viewpoint expressed at the time a standard is approved and issued is subject to change brought about through developments in the state of the art and comments received from users of the standard. Every IEEE Standard is subjected to review at least every five years for revision
- 1.请仔细阅读文档,确保文档完整性,对于不预览、不比对内容而直接下载带来的问题本站不予受理。
- 2.下载的文档,不会出现我们的网址水印。
- 3、该文档所得收入(下载+内容+预览)归上传者、原创作者;如果您是本文档原作者,请点此认领!既往收益都归您。
下载文档到电脑,查找使用更方便
10000 积分 0人已下载
下载 | 加入VIP,交流精品资源 |
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- IEEE107662005ENVHDLREGISTERTRANSFERLEVELRTLSYNTHESISIEEECOMPUTERSOCIETYDOCUMENTVHDL 注册 传输 RTL 合成 PDF
链接地址:http://www.mydoc123.com/p-1248017.html