IECQ 04-5-2010 IEC quality assessment system for electronic components (IECQ scheme) - Standard training - Part 5 Standard operational procedures for conducting.pdf

《IECQ 04-5-2010 IEC quality assessment system for electronic components (IECQ scheme) - Standard training - Part 5 Standard operational procedures for conducting.pdf》由会员分享，可在线阅读，更多相关《IECQ 04-5-2010 IEC quality assessment system for electronic components (IECQ scheme) - Standard training - Part 5 Standard operational procedures for conducting.pdf（11页珍藏版）》请在麦多课文档分享上搜索。

1、 IECQ 04-5 Edition 1.0 2010-07IECQ PUBLICATION Standard Training Part 5: Standard operational procedures for conducting IECQ HSPM Training IECQ 04-5:2010(E) IEC Quality Assessment System for Electronic Components (IECQ System) THIS PUBLICATION IS COPYRIGHT PROTECTED Copyright 2010 IEC, Geneva, Switz

2、erland All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either IEC or IECs member National Committee in the countr

3、y of the requester. If you have any questions about IEC copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or your local IEC member National Committee for further information. IEC Central Office 3, rue de Varemb CH-1211 Geneva 20 Swit

4、zerland Email: inmailiec.ch Web: www.iec.ch About the IEC The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes International Standards for all electrical, electronic and related technologies. About IEC publications The technical content o

5、f IEC publications is kept under constant review by the IEC. Please make sure that you have the latest edition, a corrigenda or an amendment might have been published. Catalogue of IEC publications: www.iec.ch/searchpub The IEC on-line Catalogue enables you to search by a variety of criteria (refere

6、nce number, text, technical committee,). It also gives information on projects, withdrawn and replaced publications. IEC Just Published: www.iec.ch/online_news/justpub Stay up to date on all new IEC publications. Just Published details twice a month all new publications released. Available on-line a

7、nd also by email. Electropedia: www.electropedia.org The worlds leading online dictionary of electronic and electrical terms containing more than 20 000 terms and definitions in English and French, with equivalent terms in additional languages. Also known as the International Electrotechnical Vocabu

8、lary online. Customer Service Centre: www.iec.ch/webstore/custserv If you wish to give us your feedback on this publication or need further assistance, please visit the Customer Service Centre FAQ or contact us: Email: csciec.ch Tel.: +41 22 919 02 11 Fax: +41 22 919 03 00 IECQ 04-5 Edition 1.0 2010

9、-07IECQ PUBLICATION Standard Training Part 5: Standard operational procedures for conducting IECQ HSPM Training INTERNATIONAL ELECTROTECHNICAL COMMISSION IEC Quality Assessment System for Electronic Components (IECQ Scheme) ZZ PRICE CODE 2 IECQ 04-5 IEC:2010(E) CONTENTS FOREWORD.3 INTRODUCTION.4 1 I

10、ECQ HSPM Training Courses5 2 IECQ Standard Training Material5 3 Changes to IECQ Standard Training Material .5 4 Examination .5 5 IECQ Training Certificate6 6 Printing.7 7 Class evaluation by attending students.7 8 Copyright7 IECQ 04-5 IEC:2010(E) 3 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ Standar

11、d Training Part 5: Standard operational procedures for conducting IECQ HSPM Training FOREWORD This publication has been prepared by the Management Committee (MC) of the IECQ. The IECQ has undertaken a major revision of its system and scheme documentation, which now utilize the following document str

12、ucture. IECQ 01, IEC Quality Assessment System for Electronic Components (IECQ System) Basic Rules IECQ 02, IECQ System General Requirements for the Acceptance of IECQ Certification Bodies into the IECQ System IECQ 03 IECQ Rules of Procedure IECQ 03-1, Rules of Procedure Part 1: General Requirements

13、 for all IECQ Schemes IECQ 03-2, Rules of Procedure Part 2: IECQ Approved Process Scheme IECQ 03-3, Rules of Procedure Part 3: IECQ Approved Component Products, Related Materials b) demonstrates a students comprehension of the material presented on Days 1 and 2, Implementer and on Days 1, 2 and 3 As

14、sessor; c) each exam shall be of a minimum 2 hours duration; d) be of written format with a combination of true 2) there shall be one exam that covers Days 1 and 2 that demonstrates the students comprehension of the IECQ HSPM Implementation under the technical requirements of IECQ QC 080000 and IECQ

15、 03-5; 3) there shall be one exam that covers Days 1, 2 and 3 that demonstrates the students comprehension of the IECQ HSPM Assessment Process under the technical requirements of IECQ 03-1, IECQ 03-5 and IECQ QC 080000; 4) these two exams shall be created by the Training Body providing the course, t

16、he implementation exam shall be different from the assessment exam, must have a defined answers key and all must be approved as part of the RABQSA certification of the Training Body; 5) exams shall be revised by the Training Body from time to time but not less than once every 12 months. Each revisio

17、n shall be approved as part of the RABQSA certification of the Training Body. NOTE Exams should include some questions related to the various statutory, regulatory and/or EU Directives. The Training Body is required to provide results to the student in not more than 30 days following the examination

18、. Records of the examination shall be retained by the Training Body for a period of not less than 6 years. 5 IECQ Training Certificate At the completion of the training and successful examination in accordance with these Rules of Procedure, the IECQ Training Body shall issue an IECQ Certificate to s

19、tudents qualifying for the following types of certificates. 2-day course: IECQ HSPM Implementation Certificate 3-day course and no IECQ OD 010 Criteria IECQ HSPM Implementation Certificate 3-day course and IECQ OD 010 Criteria for Pre-qualification c) printed slides should be in colour; d) The print

20、ed slides shall only be issued as a complete set for each day. No partial printing. However, those attending Day 1 Module shall only receive copies of Day 1 material and those attending Days 1 and 2 Modules shall only receive copies of Days 1 and 2 material. Electronic copies of the training materia

21、l, is NOT permitted except as specifically authorized in the Work/Assembly Instruction for each module. 7 Class evaluation by attending students Training Bodies shall ensure at the end of each day of training that each student completes and turns into the Trainer(s) a complete class evaluation form.

22、 Training Bodies shall compile the results of the surveys within 30 days of a training class and send summary reports to the IECQ Secretariat at least once per quarter. Information received from these reports shall be used to evaluate the overall perception of the quality of the material and the ins

23、truction by the IECQ Technical Committee responsible for the Training Material. 8 Copyright The IECQ HSPM Standard Training Material is subjected to copyright provisions. Any questions concerning copyright should be directed to the IECQ endorsed Training Body and/or the IECQ Secretariat, see www.iecq.org. _ INTERNATIONAL ELECTROTECHNICAL COMMISSION 3, rue de Varemb PO Box 131 CH-1211 Geneva 20 Switzerland Tel: + 41 22 919 02 11 Fax: + 41 22 919 03 00 infoiec.ch www.iec.ch