IECQ 04-3-2-2014 IEC Quality Assessment System for Electronic Components (IECQ System) - Standard Training - Part 3-2 Standard operational procedures for conduc.pdf

《IECQ 04-3-2-2014 IEC Quality Assessment System for Electronic Components (IECQ System) - Standard Training - Part 3-2 Standard operational procedures for conduc.pdf》由会员分享，可在线阅读，更多相关《IECQ 04-3-2-2014 IEC Quality Assessment System for Electronic Components (IECQ System) - Standard Training - Part 3-2 Standard operational procedures for conduc.pdf（10页珍藏版）》请在麦多课文档分享上搜索。

1、 IEC Quality Assessment System for Electronic Components (IECQ System) IECQ 04-3-2 Edition 1.0 2014-12 IECQ PUBLICATION Standard Training Part 3-2: Standard operational procedures for conducting IECQ AC-AQP Training IECQ 04-3-2:2014-12(en) THIS PUBLICATION IS COPYRIGHT PROTECTED Copyright 2014 IEC,

2、Geneva, Switzerland All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either IEC or IECs member National Committee

3、in the country of the requester. If you have any questions about IEC copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or your local IEC member National Committee for further information. IEC Central Office Tel.: +41 22 919 02 11 3,

4、rue de Varemb Fax: +41 22 919 03 00 CH-1211 Geneva 20 infoiec.ch Switzerland www.iec.ch About the IEC The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes International Standards for all electrical, electronic and related technologies. Ab

5、out IEC publications The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the latest edition, a corrigenda or an amendment might have been published. IEC Catalogue - webstore.iec.ch/catalogue The stand-alone application for consulting the

6、 entire bibliographical information on IEC International Standards, Technical Specifications, Technical Reports and other documents. Available for PC, Mac OS, Android Tablets and iPad. IEC publications search - www.iec.ch/searchpub The advanced search enables to find IEC publications by a variety of

7、 criteria (reference number, text, technical committee,). It also gives information on projects, replaced and withdrawn publications. IEC Just Published - webstore.iec.ch/justpublished Stay up to date on all new IEC publications. Just Published details all new publications released. Available online

8、 and also once a month by email. Electropedia - www.electropedia.org The worlds leading online dictionary of electronic and electrical terms containing more than 30 000 terms and definitions in English and French, with equivalent terms in 14 additional languages. Also known as the International Elec

9、trotechnical Vocabulary (IEV) online. IEC Glossary - std.iec.ch/glossary More than 55 000 electrotechnical terminology entries in English and French extracted from the Terms and Definitions clause of IEC publications issued since 2002. Some entries have been collected from earlier publications of IE

10、C TC 37, 77, 86 and CISPR. IEC Customer Service Centre - webstore.iec.ch/csc If you wish to give us your feedback on this publication or need further assistance, please contact the Customer Service Centre: csciec.ch. IECQ 04-3-2 Edition 1.0 2014-12 IECQ PUBLICATION Standard Training Part 3-2: Standa

11、rd operational procedures for conducting IECQ AC-AQP Training INTERNATIONAL ELECTROTECHNICAL COMMISSION ZZ PRICE CODE IEC Quality Assessment System for Electronic Components (IECQ System) 2 IECQ 04-3-2:2014 IEC 2014 CONTENTS FOREWORD . 3 INTRODUCTION . 4 1 IECQ AQP Training Courses and Qualification

12、 of Training Bodies . 5 2 IECQ Standard Training Material . 5 3 Changes to IECQ Standard Training Material 5 4 Examination 6 5 IECQ Training Certificate 6 6 Printing . 7 7 Class evaluation by attending students . 7 8 Copyright 7 IECQ 04-3-2:2014 IEC 2014 3 INTERNATIONAL ELECTROTECHNICAL COMMISSION _

13、 Standard Training Part 3-2: Standard operational procedures for conducting IECQ AC-AQP Training FOREWORD This publication has been prepared by the Management Committee (MC) of the IECQ. The IECQ WG08 has created this document in support of the training material that has been developed for the IECQ

14、AC-AQP Programme. This document sets out the consistent approach to the implementation, delivering, outcome and on-going analyses of the appropriateness of the IECQ AC-AQP Programme training material developed by IECQ WG08. The text of this publication is based on the following documents: Document R

15、eport on Approval WG08-007A-CA IECQ MC/311/CA Full information on the approval by the MC of this publication can be found in the report indicated in the above table. 4 IECQ 04-3-2:2014 IEC 2014 INTRODUCTION Technically competent personnel are an integral part of the IECQ Approved Component (AC) Auto

16、motive Qualification Programme (AQP). In support, IECQ facilitate standardized training via both The provision of IECQ qualified Training Bodies, and IECQ Standard Training Course Material This document sets out the requirements for IECQ endorsed Training Bodies when delivering IECQ AC-AQP Training.

17、 The requirements of IECQ 04-1, Standard Training Part 1: IECQ Training Body Requirements and Process for IECQ Acceptance shall apply except where varied within this document. Further information concerning these procedures or any other aspect of the IECQ System, may be obtained by contacting the IE

18、CQ Secretariat as follows: Address: IECQ Secretariat c/o IEC Sydney Office The Executive Centre Australia Square, Level 33 264 George Street, Sydney, NSW 2000 Australia Contact details: Tel: +61 2 4628 4690 Fx: +61 2 4627 5285 infoiecq.org www.iecq.org IECQ 04-3-2:2014 IEC 2014 5 Standard Training P

19、art 3-2: Standard operational procedures for conducting IECQ AC-AQP Training 1 IECQ AC-AQP Training Courses and Qualification of Training Bodies IECQ AC-AQP Training Courses consists of: Introduction/Implementers Day 1 Module Assessors Day 2 Module Day 1 course must be taken prior to sitting for Day

20、 2. The requirements of IECQ 04-1 concerning the qualification for endorsement of an IECQ Training Body apply except for the following additional provision: a) the process detail in IECQ 04-1 may be used; or b) Training Bodies may be evaluated for their ability to comply with this part 3-2 by IECQ W

21、G08, in which case the requirements of Subclause 4.3.1 c) of IECQ 04-1 do not apply. In all cases applications for Training Body endorsement shall be via the IECQ Secretariat. 2 IECQ Standard Training Material IECQ Training Bodies are required, as a minimum, to use the IECQ Standard Training Materia

22、l available from the IECQ Secretariat. IECQ Standard Training Material is document numbered and version controlled by the IECQ Secretariat. Additional and/or supporting material may be added in support of localized training programmes and used by the Training Body at its discretion. However, the Tra

23、ining Body is responsible for ensuring that at a minimum the Training attendees are provided instructions and copies of the IECQ Standard Training Material. Any supporting material provided by the Training Body is the sole responsibility of the Training Body including any commercial arrangements wit

24、h owners of the supporting material. 3 Changes to IECQ Standard Training Material IECQ Standard Training Material and instructions have been developed to serve as the standard/recognized IECQ AC-AQP Training Material and is subject to IECQ Document Control System with changes to the content of slide

25、s (other than inclusion of the Training Body logo and information) not permitted by the Training Body. Should the Training Body consider the need for any such changes these shall be brought to the attention of the IECQ Secretariat for submission to the IECQ Technical Committee responsible for the Tr

26、aining Material content, assembly and instruction manual. Where the Training Body requires additional slides to suit a specific audience or class, such additional slides may be used as a supplement to the IECQ slides, but shall not be used in the IECQ slide template without the prior approval from t

27、he IECQ Secretariat. 6 IECQ 04-3-2:2014 IEC 2014 4 Examination In order for an attendee to demonstrate technical competence and be authorized to receive an IECQ AC-AQP Implementer and/or Assessor Certificate, Days 1 and 2 Training Modules require the attendee to undertake a formal examination admini

28、stered by the Training Body that satisfies the following general requirements: a) conducted on the same day as the Training; b) demonstrates the students comprehension of the material presented on Day 1 Implementer and on Days 1 and 2 Assessor; c) each exam shall be of a minimum 2 hours duration; d)

29、 be of written format with a combination of true and false, multiple choice and essay type questions. The following requirements must be met: 1) section 1 true and false with a value of 20 % of the total score, section 2 fill in, multiple choice and identifying non-conformances with a value of 60 %

30、of the total score, section 3 2 essay questions with a value of 20 % of the total score; 2) there shall be one exam that covers Day 1 that demonstrates the students comprehension of the IECQ AC-AQP implementation under the technical requirements of IECQ 03-3 and IECQ 03-3-2; 3) there shall be one ex

31、am that covers Days 1 and 2 that demonstrates the students comprehension of the IECQ AC-AQP Assessment Process under the technical requirements of IECQ 03-3 and IECQ 03-3-2; 4) these two exams shall be created by the Training Body providing the course, the implementation exam shall be different from

32、 the assessment exam, must have a defined answers key and all must be able to demonstrate the students comprehension; 5) exams shall be revised by the Training Body from time to time but not less than once every 12 months. Copies of exams shall be provided to the IECQ Secretariat. The Training Body

33、is required to provide results to the student in not more than 30 days following the examination. Records of the examination shall be retained by the Training Body for a period of not less than 6 years. 5 IECQ Training Certificate At the completion of the Training and successful examination in accor

34、dance with these Rules of Procedure, the IECQ Training Body shall issue an IECQ Certificate to students qualifying for the following types of certificates. 1-day course: IECQ AC-AQP Implementation Certificate 2-day course and IECQ OD 010 Criteria for Pre-qualification and Assessors and IECQ 03- 2 cr

35、iteria: IECQ AC-AQP Assessor Certificate 2-day course and IECQ OD 010 Criteria for Pre-qualification and Lead Assessors and IECQ 03-2 criteria: IECQ AC-AQP Lead Assessor Certificate All certificates shall be entered, issued and printed directly from the IECQ On-Line Training Certificate System. Refe

36、r to IECQ OD 016 for guidance on the System. IECQ 04-3-2:2014 IEC 2014 7 6 Printing Printing of IECQ Standard Training Material is permitted for the purpose of providing copies to attendees, using the following guidelines: a) for ease of reading, there should be no more than 2 slides per A4 size pap

37、er; b) while A4 is the preferred paper size, alternative sizes may be used on the basis it provides similar readability; c) printed slides should be in colour; d) The printed slides shall only be issued as a complete set for each day. No partial printing. However, those attending Day 1 Module shall

38、only receive copies of Day 1 material and those attending Days 1 and 2 Modules shall only receive copies of Days 1 and 2 material. Electronic copies of the training material, is not permitted except as specifically authorized in the work/assembly instruction for each module. 7 Class evaluation by at

39、tending students Training Bodies shall ensure at the end of each day of training that each student completes and turns into the Trainer(s) a complete class evaluation form. Training Bodies shall compile the results of the surveys within 30 days of a training class and send summary reports to the IEC

40、Q Secretariat at least once per quarter. Information received from these reports shall be used to evaluate the overall perception of the quality of the material and the instruction by the IECQ Technical Committee responsible for the Training Material. 8 Copyright The IECQ AC-AQP Standard Training Ma

41、terial is subjected to copyright provisions. Any questions concerning copyright should be directed to the IECQ endorsed Training Body and/or the IECQ Secretariat, see www.iecq.org. _ INTERNATIONAL IEC QUALITY ASSESSMENT SYSTEM ELECTROTECHNICAL FOR ELECTRONIC COMPONENTS COMMISSION 3 rue de Varembe IECQ Secretariat c/o IEC Sydney Office PO Box 131 The Executive Centre CH-1211 Geneva 20 Australia Square, Level 33 Switzerland 264 George Street Sydney, NSW 2000 Tel: + 41 22 919 02 11 Australia infoiec.ch www.iec.ch Tel: +61 2 4628 4690 Fx: +61 2 4627 5285 infoiecq.org www.iecq.org