API MPMS 11 5-2009 Manual of Petroleum Measurement Standards Chapter 11-Physical Properties Data Section 5-Density Weight Volume Intraconversion Part 1-Conversi.pdf

《API MPMS 11 5-2009 Manual of Petroleum Measurement Standards Chapter 11-Physical Properties Data Section 5-Density Weight Volume Intraconversion Part 1-Conversi.pdf》由会员分享，可在线阅读，更多相关《API MPMS 11 5-2009 Manual of Petroleum Measurement Standards Chapter 11-Physical Properties Data Section 5-Density Weight Volume Intraconversion Part 1-Conversi.pdf（124页珍藏版）》请在麦多课文档分享上搜索。

1、Manual of PetroleumMeasurement StandardsChapter 11Physical PropertiesDataSection 5Density/Weight/Volume Intraconversion Part 1Conversions of API Gravity at 60 F Adjunct to: ASTM D1250-08 and IP 200/08FIRST EDITION, MARCH 2009ERRATA, SEPTEMBER 2011 (UPDATED, SEPTEMBER 2013)REAFFIRMED, MARCH 2015Manua

2、l of PetroleumMeasurement StandardsChapter 11Physical Properties DataSection 5Density/Weight/Volume IntraconversionPart 1Conversions of API Gravity at 60 FAdjunct to: ASTM D1250-08 and IP 200/08Measurement Coordination FIRST EDITION, MARCH 2009ERRATA, SEPTEMBER 2011 (UPDATED, SEPTEMBER 2013)REAFFIRM

3、ED, MARCH 2015Special NotesAPI publications necessarily address problems of a general nature. With respect to particular circumstances, local, state, and federal laws and regulations should be reviewed.Neither API nor any of APIs employees, subcontractors, consultants, committees, or other assignees

4、 make any warranty or representation, either express or implied, with respect to the accuracy, completeness, or usefulness of the information contained herein, or assume any liability or responsibility for any use, or the results of such use, of any information or process disclosed in this publicati

5、on. Neither API nor any of APIs employees, subcontractors, consultants, or other assignees represent that use of this publication would not infringe upon privately owned rights.API publications may be used by anyone desiring to do so. Every effort has been made by the Institute to assure the accurac

6、y and reliability of the data contained in them; however, the Institute makes no representation, warranty, or guarantee in connection with this publication and hereby expressly disclaims any liability or responsibility for loss or damage resulting from its use or for the violation of any authorities

7、 having jurisdiction with which this publication may conflict. API makes no warranties, express or implied for reliance on or any omissions from the information or equations contained in this document. The examples given in this document are for illustration purposes only. They are not to be conside

8、red exclusive or exhaustive in nature.API publications are published to facilitate the broad availability of proven, sound engineering and operating practices. These publications are not intended to obviate the need for applying sound engineering judgment regarding when and where these publications

9、should be utilized. The formulation and publication of API publications is not intended in any way to inhibit anyone from using any other practices.Any manufacturer marking equipment or materials in conformance with the marking requirements of an API standard is solely responsible for complying with

10、 all the applicable requirements of that standard. API does not represent, warrant, or guarantee that such products do in fact conform to the applicable API standard.All rights reserved. No part of this work may be reproduced, translated, stored in a retrieval system, or transmitted by any means,ele

11、ctronic, mechanical, photocopying, recording, or otherwise, without prior written permission from the publisher. Contact thePublisher, API Publishing Services, 1220 L Street, N.W., Washington, D.C. 20005.Copyright 2009 American Petroleum InstituteForewordNothing contained in any API publication is t

12、o be construed as granting any right, by implication or otherwise, for the manufacture, sale, or use of any method, apparatus, or product covered by letters patent. Neither should anything contained in the publication be construed as insuring anyone against liability for infringement of letters pate

13、nt.This document was produced under API standardization procedures that ensure appropriate notification and participation in the developmental process and is designated as an API standard. Questions concerning the interpretation of the content of this publication or comments and questions concerning

14、 the procedures under which this publication was developed should be directed in writing to the Director of Standards, American Petroleum Institute, 1220 L Street, N.W., Washington, D.C. 20005. Requests for permission to reproduce or translate all or any part of the material published herein should

15、also be addressed to the director.Generally, API standards are reviewed and revised, reaffirmed, or withdrawn at least every five years. A one-time extension of up to two years may be added to this review cycle. Status of the publication can be ascertained from the API Standards Department, telephon

16、e (202) 682-8000. A catalog of API publications and materials is published annually and updated quarterly by API, 1220 L Street, N.W., Washington, D.C. 20005.Suggested revisions are invited and should be submitted to the Standards Department, API, 1220 L Street, NW, Washington, D.C. 20005, standards

17、api.org.iiiContentsPageImplementation Guidelines. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Scope . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

18、 . . . . . . . . . . . . . . . . . . . . . . . . . 12 References . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Definitions and Abbreviations . . . . . . . . . . . . . . . . . . . . . . .

19、. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23.1 Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23.2 Abbreviations. . . . . . . . . . . . . . . .

20、 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34 Implementation Procedures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44.1 Relative Density

21、(60/60 F) Equivalent to API Gravity at 60 F. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44.2 Absolute Density at 60 F Equivalent to API Gravity at 60 F. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44.3 Absolute Density at 15 C Equivalent to API

22、Gravity at 60 F . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54.4 Pounds per U.S. Gallon at 60 F Equivalent to API Gravity at 60 F . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54.5 U.S. Gallons per Pound at 60 F Equivalent to API Gravity at 60 F . . . . .

23、. . . . . . . . . . . . . . . . . . . . . . . . . . 64.6 Short Tons per 1000 U.S. Gallon at 60 F Equivalent to API Gravity at 60 F . . . . . . . . . . . . . . . . . . . . . . . . 74.7 U.S. Gallons per Short Ton at 60 F Equivalent to API Gravity at 60 F . . . . . . . . . . . . . . . . . . . . . . . .

24、 . . . . 74.8 Short Tons per Barrel at 60 F Equivalent to API Gravity at 60 F . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84.9 Barrels per Short Ton at 60 F Equivalent to API Gravity at 60 F . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84.10 Long Tons per 1

25、000 U.S. Gallons at 60 F Equivalent to API Gravity at 60 F . . . . . . . . . . . . . . . . . . . . . . 94.11 U.S. Gallons per Long Ton at 60 F Equivalent to API Gravity at 60 F . . . . . . . . . . . . . . . . . . . . . . . . . . . 104.12 Long Tons per Barrel at 60 F Equivalent to API Gravity at 60 F

26、 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 104.13 Barrels per Long Ton at 60 F Equivalent to API Gravity at 60 F . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 114.14 Metric Tons per 1000 U.S. Gallons at 60 F Equivalent to API Gravity at 60 F . . . . . . . . . . .

27、. . . . . . . . . 124.15 Metric Tons per Barrel at 60 F Equivalent to API Gravity at 60 F . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 124.16 Barrels per Metric Ton at 60 F Equivalent to API Gravity at 60 F . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 134.17 Cubic Metre

28、s per Short Ton at 15 C Equivalent to API Gravity at 60 F. . . . . . . . . . . . . . . . . . . . . . . . . . 144.18 Cubic Metres per Long Ton at 15 C Equivalent to API Gravity at 60 F . . . . . . . . . . . . . . . . . . . . . . . . . . 144.19 U.S. Gallons at 60 F to Litres at 15 C Dependent on API G

29、ravity at 60 F . . . . . . . . . . . . . . . . . . . . . . . 154.20 Barrels at 60 F to Litres at 15 C Dependent on API Gravity at 60 F. . . . . . . . . . . . . . . . . . . . . . . . . . . . 155 Rounding . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

30、 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 165.1 Data Level. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 165.2 Rounding of Numbers. . . . . . . . . . . . . . . . . . . . . .

31、. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16Annex A Physical Constants. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18Annex B Derivation of Equations . . . . . .

32、. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19Annex C Partial Tables. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25Annex D Interrel

33、ation of Units of Measurement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26Annex E Temperature Conversions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27Table1 Sig

34、nificant Digits for Bulk Quantities . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17vIntroductionAPI MPMS Ch. 11.5.1, API MPMS Ch. 11.5.2, and API MPMS Ch. 11.5.3 are intended to replace API MPMS Ch. 11.1-1980 Volumes XI/XII (ASTM D1250

35、-80, IP 200/80). This standard gives the following equivalents for any value of API gravity at 60 F: relative density at 60 F (old Table 3); absolute density at 60 F; absolute density at 15 C (old Table 3); pounds per U.S. gallon at 60 F in vacuo and in air (old Table 8); U.S. gallons per pound at 6

36、0 F in vacuo and in air (old Table 8); short tons per 1000 U.S. gallons at 60 F in vacuo and in air (old Table 9); U.S. gallons per short ton at 60 F in vacuo and in air (old Table 10); short tons per barrel at 60 F in vacuo and in air (old Table 9); barrels per short ton at 60 F in vacuo and in air

37、 (old Table 10); long tons per 1000 U.S. gallons at 60 F in vacuo and in air (old Table 11); U.S. gallons per long ton at 60 F in vacuo and in air (old Table 12); long tons per barrel at 60 F in vacuo and in air (old Table 11); barrels per long ton at 60 F in vacuo and in air (old Table 12); metric

38、tons per 1000 U.S. gallons at 60 F in vacuo and in air (old Table 13); metric tons per barrel at 60 F in vacuo and in air (old Table 13); barrels per metric ton at 60 F in vacuo and in air; cubic metres per short ton at 15 C in vacuo and in air (old Table 14); cubic metres per long ton at 15 C in va

39、cuo and in air (old Table 14).While not related to API gravity, the following are included for user convenience: U.S. gallons at 60 F to litres at 15 C (old Table 4); barrels at 60 F to litres at 15 C (old Table 4);This standard is intended for application to bulk liquid quantities.This standard pro

40、vides implementation procedures for conversion of API gravity at 60 F to equivalent densities in both in vacuo and in air values. A derivation of the in air equation is presented in Section B.4. In air values reflect the buoyancy effect of air if a substance were to be weighed in the air, and thus a

41、re slightly less than in vacuo values by approximately 0.1 % to 0.2 %. Although in air implementation procedures are presented in this standard in recognition viiof certain common industry practices, in vacuo values are recommended because they more accurately represent the amount of material presen

42、t. Furthermore, as there is no known technical reason for the continued use of API gravity in the oil industry, absolute density is recommended instead (see API MPMS Ch. 11.5.3). This standard is presented, however, for the convenience of certain current common industry practices.viii1Chapter 11Phys

43、ical Properties DataSection 5Density/Weight/Volume IntraconversionPart 1Conversions of API Gravity at 60 FImplementation GuidelinesThis revised standard is effective upon the date of publication and supersedes the applicable parts of API MPMS Ch. 11.1-1980, Volumes XI/XII. However, due to the nature

44、 of the changes in this revised standard, it is recognized that guidance concerning an implementation period may be needed in order to avoid disruptions within the industry and ensure proper application. As a result, it is recommended that this revised standard be utilized on all new applications no

45、 later than TWO YEARS after the publication date. An application, for this purpose, is defined as the point where the calculation is applied.Once the revised standard is implemented in a particular application, the previous standard will no longer be used in that application.However, the use of API

46、standards remains voluntary and the decision on when to utilize a standard is an issue that is subject to the negotiations between the parties involved in the transaction.1 ScopeThese intraconversion tables are applicable to all crude oils, petroleum products, and petrochemicals.2 ReferencesThe foll

47、owing referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.API MPMS Chapter 11.1-2004, Temperature and Pressure Volum

48、e Correction Factors for Generalized Crude Oils, Refined Products, and Lubricating OilsAPI MPMS Chapter 11.4.1-2003, Density of Water and Water VCFs for Volumetric Meter ProvingAPI MPMS Chapter 15-2001, Guideline for the Use of the International System of Units (SI) in the Petroleum and Allied Indus

49、triesASTM D1250-1959 1, Report on the Development, Construction, and Preparation of the ASTMIP Petroleum Measurement Tables12th General Conference on Weights and Measures (1964)NIST Handbook 44-2002 Edition 2, Specifications, Tolerances, and Other Technical Requirements for Weighing and Measuring DevicesNIST Handbook 44-2007 Edition, Appendix CNIST Handbook 105-1 (Revised 1990), Specifications and Tolerances for Reference Standards and Field Standard Weights and Measures1 ASTM International,