ANSI AWS C4 6M-2006 Thermal Cutting Classification of Thermal Cuts Geometric Product Specification and Quality Tolerances (1st Edition)《热切割 热切割分类 产品几何量技术规范和质量公差.pdf
《ANSI AWS C4 6M-2006 Thermal Cutting Classification of Thermal Cuts Geometric Product Specification and Quality Tolerances (1st Edition)《热切割 热切割分类 产品几何量技术规范和质量公差.pdf》由会员分享,可在线阅读,更多相关《ANSI AWS C4 6M-2006 Thermal Cutting Classification of Thermal Cuts Geometric Product Specification and Quality Tolerances (1st Edition)《热切割 热切割分类 产品几何量技术规范和质量公差.pdf(52页珍藏版)》请在麦多课文档分享上搜索。
1、Thermal CuttingClassification ofThermal CutsGeometric ProductSpecification andQuality TolerancesAWS C4.6M:2006 (R2012)(ISO 9013:2002 IDT) An American National StandardAWS C4.6M:2006 (R2012)(ISO 9013:2002 IDT) An American National StandardApproved by the American National Standards Institute July 10,
2、 2006Reaffirmed: October 30, 2012Thermal CuttingClassification of Thermal CutsGeometric Product Specification and Quality Tolerances1st EditionPrepared by the American Welding Society (AWS) C4 Committee on Oxyfuel Gas Welding and CuttingUnder the Direction of the AWS Technical Activities CommitteeAp
3、proved by the AWS Board of DirectorsAbstractThis is the U.S. national adoption of ISO 9013:2002, Thermal cutting classification of thermal cuts Geometric product specification and quality tolerances. It includes three national annexes (Criteria for Describing Oxygen-CutSurfaces with a photograph of
4、a Surface Roughness Guide, a list of reference documents available for individualsinvolved with Oxyfuel Gas Welding and Cutting, and a guide for the preparation of technical inquiries to AWS) as wellas a list of published AWS documents on Oxyfuel Gas Welding and Cutting.International Standard Book N
5、umber: 0-87171-012-9American Welding Society8669 Doral Blvd., Suite 130, Doral, FL 33166 2006 by American Welding SocietyAll rights reserved Printed in the United States of AmericaReaffirmed: October 30, 2012Photocopy Rights. No portion of this standard may be reproduced, stored in a retrieval syste
6、m, or transmitted in anyform, including mechanical, photocopying, recording, or otherwise, without the prior written permission of the copyrightowner.Authorization to photocopy items for internal, personal, or educational classroom use only or the internal, personal, oreducational classroom use only
7、 of specific clients is granted by the American Welding Society provided that the appro-priate fee is paid to the Copyright Clearance Center, 222 Rosewood Drive, Danvers, MA 01923, tel: (978) 750-8400;Internet: .AWS C4.6M:2006 (R2012)(ISO 9013:2002 IDT) iiAWS C4.6M:2006 (R2012)(ISO 9013:2002 IDT) ii
8、iStatement on the Use of American Welding Society StandardsAll standards (codes, specifications, recommended practices, methods, classifications, and guides) of the AmericanWelding Society (AWS) are voluntary consensus standards that have been developed in accordance with the rules of theAmerican Na
9、tional Standards Institute (ANSI). When AWS American National Standards are either incorporated in, ormade part of, documents that are included in federal or state laws and regulations, or the regulations of other governmen-tal bodies, their provisions carry the full legal authority of the statute.
10、In such cases, any changes in those AWS standardsmust be approved by the governmental body having statutory jurisdiction before they can become a part of those lawsand regulations. In all cases, these standards carry the full legal authority of the contract or other document that invokesthe AWS stan
11、dards. Where this contractual relationship exists, changes in or deviations from requirements of an AWSstandard must be by agreement between the contracting parties.AWS American National Standards are developed through a consensus standards development process that bringstogether volunteers represen
12、ting varied viewpoints and interests to achieve consensus. While AWS administers the process and establishes rules to promote fairness in the development of consensus, it does not independently test,evaluate, or verify the accuracy of any information or the soundness of any judgments contained in it
13、s standards.AWS disclaims liability for any injury to persons or to property, or other damages of any nature whatsoever, whether special, indirect, consequential, or compensatory, directly or indirectly resulting from the publication, use of, or reliance onthis standard. AWS also makes no guarantee
14、or warranty as to the accuracy or completeness of any information publishedherein.In issuing and making this standard available, AWS is neither undertaking to render professional or other services for oron behalf of any person or entity, nor is AWS undertaking to perform any duty owed by any person
15、or entity to someoneelse. Anyone using these documents should rely on his or her own independent judgment or, as appropriate, seek theadvice of a competent professional in determining the exercise of reasonable care in any given circumstances. It isassumed that the use of this standard and its provi
16、sions is entrusted to appropriately qualified and competent personnel.This standard may be superseded by new editions. This standard may also be corrected through publication of amend-ments or errata, or supplemented by publication of addenda. Information on the latest editions of AWS standards incl
17、ud-ing amendments, errata, and addenda is posted on the AWS web page (www.aws.org). Users should ensure that they havethe latest edition, amendments, errata, and addenda.Publication of this standard does not authorize infringement of any patent or trade name. Users of this standard acceptany and all
18、 liabilities for infringement of any patent or trade name items. AWS disclaims liability for the infringement ofany patent or product trade name resulting from the use of this standard.AWS does not monitor, police, or enforce compliance with this standard, nor does it have the power to do so.Officia
19、l interpretations of any of the technical requirements of this standard may only be obtained by sending a request,in writing, to the appropriate technical committee. Such requests should be addressed to the American Welding Society,Attention: Managing Director, Technical Services Division, 8669 Dora
20、l Blvd., Suite 130, Doral, FL 33166 (see AnnexE). With regard to technical inquiries made concerning AWS standards, oral opinions on AWS standards may be ren-dered. These opinions are offered solely as a convenience to users of this standard, and they do not constitute professionaladvice. Such opini
21、ons represent only the personal opinions of the particular individuals giving them. These individualsdo not speak on behalf of AWS, nor do these oral opinions constitute official or unofficial opinions or interpretations ofAWS. In addition, oral opinions are informal and should not be used as a subs
22、titute for an official interpretation.This standard is subject to revision at any time by the AWS C4 Committee on Oxyfuel Gas Welding and Cutting. It mustbe reviewed every five years, and if not revised, it must be either reaffirmed or withdrawn. Comments (recommendations,additions, or deletions) an
23、d any pertinent data that may be of use in improving this standard are required and should beaddressed to AWS Headquarters. Such comments will receive careful consideration by the AWS C4 Committee onOxyfuel Gas Welding and Cutting and the author of the comments will be informed of the Committees res
24、ponse to thecomments. Guests are invited to attend all meetings of the AWS C4 Committee on Oxyfuel Gas Welding and Cutting toexpress their comments verbally. Procedures for appeal of an adverse decision concerning all such comments are pro-vided in the Rules of Operation of the Technical Activities
- 1.请仔细阅读文档,确保文档完整性,对于不预览、不比对内容而直接下载带来的问题本站不予受理。
- 2.下载的文档,不会出现我们的网址水印。
- 3、该文档所得收入(下载+内容+预览)归上传者、原创作者;如果您是本文档原作者,请点此认领!既往收益都归您。
下载文档到电脑,查找使用更方便
10000 积分 0人已下载
下载 | 加入VIP,交流精品资源 |
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- ANSIAWSC46M2006THERMALCUTTINGCLASSIFICATIONOFTHERMALCUTSGEOMETRICPRODUCTSPECIFICATIONANDQUALITYTOLERANCES1STEDITION
链接地址:http://www.mydoc123.com/p-1242314.html