ANSI ASSE Z359 7-2011 Qualification and Verification Testing of Fall Protection Products《防坠落产品的资格和验证测试》.pdf

《ANSI ASSE Z359 7-2011 Qualification and Verification Testing of Fall Protection Products《防坠落产品的资格和验证测试》.pdf》由会员分享，可在线阅读，更多相关《ANSI ASSE Z359 7-2011 Qualification and Verification Testing of Fall Protection Products《防坠落产品的资格和验证测试》.pdf（28页珍藏版）》请在麦多课文档分享上搜索。

1、AMERICAN NATIONAL STANDARD Part of the Fall Protection Code ANSI/ASSE Z359.7-2011 Qualification and Verification Testing of Fall Protection Products AmericAn Society of SAfety engineerS Copyright American Society of Safety Engineers Provided by IHS under license with ASSE/SAFE Licensee=CHINA STDS IN

2、FORMATION CENTER - avada indx app by/5954931001, User=Zhao Not for Resale, 05/02/2012 01:19:40 MDT No reproduction or networking permitted without license from IHS -,-,-t he information and materials contained in this publication have been developed from sources believed to be reliable. However, the

3、 American Society of Safety engineers (ASSe) as secretariat of the An Si accredited Z359 c ommittee or individual committee members accept no legal responsibility for the correctness or com- pleteness of this material or its application to specific factual situations. By publication of this standard

4、, ASSe or the Z359 c ommittee does not ensure that adherence to these recommendations will protect the safety or health of any persons, or preserve property. Copyright American Society of Safety Engineers Provided by IHS under license with ASSE/SAFE Licensee=CHINA STDS INFORMATION CENTER - avada ind

5、x app by/5954931001, User=Zhao Not for Resale, 05/02/2012 01:19:40 MDT No reproduction or networking permitted without license from IHS -,-,-ANSI ANSI/ASSE Z359.7 2011 American National Standard Qualification and Verification Testing of Fall Protection Products Secretariat American Society of Safety

6、 Engineers 1800 east o akton Street Des Plaines, illinois 60018-2187 Approved May 5, 2011 Effective Date October 3, 2011 American National Standards Institute, Inc. Copyright American Society of Safety Engineers Provided by IHS under license with ASSE/SAFE Licensee=CHINA STDS INFORMATION CENTER - av

7、ada indx app by/5954931001, User=Zhao Not for Resale, 05/02/2012 01:19:40 MDT No reproduction or networking permitted without license from IHS -,-,-effective o ctober 3, 2011 Published June, 2011 by American Society of Safety Engineers 1800 East Oakton Street Des Plaines, Illinois 60018-2187 (847) 6

8、99-2929 www.asse.org c opyright 2011 by American Society of Safety engineers All r ights r eserved. n o part of this publication may be reproduced in any form, in an electronic retrieval system or otherwise, without the prior written permission of the publisher. Printed in the United States of Ameri

9、ca Approval of an American n ational Standard requires verification by An Si that the require- ments for due process, consensus, and other criteria for approval have been met by the standards developer. c onsensus is established when, in the judgment of the An Si Board of Standards r eview, substant

10、ial agreement has been reached by directly and materially affected interests. Substantial agreement means much more than a simple majority, but not necessarily unanimity. c onsensus requires that all views and objections be consid- ered, and that a concerted effort be made toward their resolution. t

11、 he use of American n ational Standards is completely voluntary; their existence does not in any respect pre- clude anyone, whether he/she has approved the standards or not, from manufacturing, marketing, purchasing, or using products, processes, or procedures not conforming to the standards. t he A

12、merican n ational Standards institute does not develop standards and will in no circumstance give an interpretation of any American n ational Standard. more- over, no person shall have the right or authority to issue an interpretation of an American n ational Standard in the name of the American n a

13、tional Standards institute. r equests for interpretation should be addressed to the secretariat or sponsor whose name appears on the title page of this standard. c aution n otice: t his American n ational Standard may be revised or withdrawn at any time. t he procedures of the American n ational Sta

14、ndards institute require that action be taken periodically to reaffirm, revise, or withdraw this standard. Purchasers of American n ational Standards may receive current information on all standards by calling or writing the American n ational Standards institute. American National Standard Copyrigh

15、t American Society of Safety Engineers Provided by IHS under license with ASSE/SAFE Licensee=CHINA STDS INFORMATION CENTER - avada indx app by/5954931001, User=Zhao Not for Resale, 05/02/2012 01:19:40 MDT No reproduction or networking permitted without license from IHS -,-,-Foreword (t his f oreword

16、 is not a part of American n ational Standard Z359.7-2011.) t his standard, national in scope, was developed by an Accredited Standards c ommittee functioning un- der the procedures of the American n ational Standards institute, with the American Society of Safety engineers (ASSe) as secretariat. t

17、his standard establishes minimum requirements for certification of fall protection products covered by the An Si Z359-series standards. it is intended that this standard addresses certification for fall protection products covered by the An Si Z359-series standards will comply with the requirements

18、detailed in this standard. n either the standards committee, nor the secretariat, states that this standard is perfect or in its ultimate form. it is recognized that new developments are to be expected, and that revisions of the standard will be necessary as the state-of-the-art progresses and furth

19、er experience is gained. it is felt, however, that uniform guidelines for fall protection programs are very much needed and that the standard in its present form provides for the minimum criteria necessary to develop and implement a comprehensive managed fall protection program. t he Z359 c ommittee

20、 solicits public input that may suggest the need for revisions to this standard. Such input should be sent to the Secretariat, ASc Z359, American Society of Safety engineers, 1800 e. o akton Street, Des Plaines, iL 60018-2187. t his standard was developed and approved for submittal to An Si by the A

21、merican n ational Standards c ommittee on Standards for f all Protection, Z359. c ommittee approval of the standard does not necessar- ily imply that all committee members voted for its approval. At the time it approved this standard, the Z359 c ommittee had the following members: Copyright American

22、 Society of Safety Engineers Provided by IHS under license with ASSE/SAFE Licensee=CHINA STDS INFORMATION CENTER - avada indx app by/5954931001, User=Zhao Not for Resale, 05/02/2012 01:19:40 MDT No reproduction or networking permitted without license from IHS -,-,-r andall Wingfield, c hairman Basil

23、 t ominna, P.e., Vice c hairman t imothy r . f isher, c SP, c Hmm, Arm , c Pe A, Secretary Jennie Dalesandro, Administrative t echnical Support Organization Represented Name of Representative American Airlines American Society of Safety engineers Bashlin industries, inc. Boeing c ompany Buckingham m

24、fg. c o., inc. c apital Safety g roup c hevron elk r iver, inc. ellis f all Safety Solutions f lexible Lifeline Systems g eneral motors Ken mahnickg ravitec Systems, inc. Hartford Steam Boiler inspection & insurance c o. High engineering c orp. Honeywell Safety Products Hy-Safe t echnology iSe A int

25、ernational Safety equipment Association indianapolis Power and Light in SPec i nternational Ltd. LJB inc. Latchways PLc Lawrence Livermore n ational Security Liberty mutual g roup Lighthouse Safety LLc Dean c arlisle Len Bradley Daniel Paine c arl g riffith, c SHm, c PSm, c Hcm , c USA, c Pe A Bradl

26、ey S. mcg ill r oderick A. Paul c huck o rebaugh Joey r . Junio James r ullo Def orest c anfield J. t homas Wolner, P.e. Brad r ohlf c raig Berkenmeier Stephanie Alvarez Paul Doepel J. n igel ellis, Ph.D., P.e., c SP, c Pe John t . Whitty, P.e. Hugh Armstrong David Lee Ken mahnick Kyle Sullivan r an

27、dall Wingfield Dave Lough t imothy Healey Jerome Kucharski, cf PS g reg Small, P.eng., m.eng. Doug myette Preston Anderson Parul Patel f rank Anzaldi r on Larkin r ussell g oldmann, ii Dan Shipp David H. Pate, c USA Paul c larke Andrew Diamond t homas Kramer, P.e., c SP r upert n oton, ce ng, miStru

28、cte t im Bissett, Beng (Hons) ce ng, mimeche Lynn c amp John r abovsky, mS, c SP, Arm c al Sparks John c orriveau Copyright American Society of Safety Engineers Provided by IHS under license with ASSE/SAFE Licensee=CHINA STDS INFORMATION CENTER - avada indx app by/5954931001, User=Zhao Not for Resal

29、e, 05/02/2012 01:19:40 MDT No reproduction or networking permitted without license from IHS -,-,-mSA monsanto murdock Webbing c o. inc. n ational Association of t ower erectors n ational institute for o ccupational Safety & Health Pamela r . Huck, inc. Peakworks PenSafe r eliance industries, LLc SPr

30、 At Society of Professional r ope Access t echnicians Safety c onnection Safety equipment institute Safety t hrough engineering, inc. Shell exploration & Production c o. SPAnco , inc. Sturges manufacturing c o., inc. Superior energy Services, inc. t ractel inc. t ransport Workers Union t ravelers t

31、ritech f all Protection United Auto Workers U.S. Air f orce Safety c enter U.S. Bureau of r eclamation U.S. Department of interior Boemre U.S. Department of the n avy Vertical Access LLc Western Area Power Administration r obert Apel John g iovengo r obert Kling, P.e., c SP Adam c hapin Bob g olz g

32、reg Pilgrim g ordon Lyman Don Doty Hongwei Hsiao, Ph.D. Pamela Huck, c SP t im Accursi g abe f usco Keith Smith W. Joe Shaw g ary c hoate Loui mccurley Jim f rank c lint Honeycutt, Sr. mike c edotal Steve Sanders michael c . Wright, P.e., c Pe, c SP Jeremy t . Deason, P.e. Steven Kim Biggs Joe B. g

33、eorge Arnie g alpin, P.e. g eorge n olan r ichard g riffith t yler g riffith Joseph r . Parks Spencer c olbert Doug Knapp Joseph Kabis Jerry yates Allen r ussell Scott H. r ichert, c SP, Arm , ALcm John Seto c raig Siciliani t om Kinman John r upp, Jr. mark S. Kantorowicz Andrew e. Salas Kimm Bonecu

34、tter Shaun r eed John m. c ushing, Jr. Sara c orman Basil t ominna, P.e. Shawn Smith Kelly Streeter, P.e. Kent Diebolt Jeff Wild Copyright American Society of Safety Engineers Provided by IHS under license with ASSE/SAFE Licensee=CHINA STDS INFORMATION CENTER - avada indx app by/5954931001, User=Zha

35、o Not for Resale, 05/02/2012 01:19:40 MDT No reproduction or networking permitted without license from IHS -,-,-Subgroup Z359.7 had the following members: r andall Wingfield, c hair Preston Anderson f rank Anzaldi Kimm Bonecutter Paul c larke r ussell g oldmann, ii Bob g olz r ichard g riffith t imo

36、thy Healey Steve Hudson r obert Kling, P.e., c SP Doug Knapp Dave Lough Bradley S. mcg ill Daniel Paine David H. Pate, c USA James r ullo Steve Sanders W. Joe Shaw Keith Smith Jeff Wild J. t homas Wolner, P.e. Copyright American Society of Safety Engineers Provided by IHS under license with ASSE/SAF

37、E Licensee=CHINA STDS INFORMATION CENTER - avada indx app by/5954931001, User=Zhao Not for Resale, 05/02/2012 01:19:40 MDT No reproduction or networking permitted without license from IHS -,-,-Contents Section PAge 1. Scope, Purpose, Application, exceptions, and interpretations . 8 1.1 Scope . 81.2

38、Purpose and Application . 81.3 exceptions . 81.4 interpretations . 9 2. Definitions 93. g eneral 9 4. t esting 10 4.1 t est equipment . 104.2 t est Specimens 125. Accreditation Body 13 6. f all Protection Product Qualification and/or Verification t esting o ptions 13 7. t esting Laboratories . 16 8.

39、 Duties and r esponsibilities of t esting Laboratories . 17 9. Duties and r esponsibilities of the manufacturer . 18 10. Verification t esting . 19 11. markings 20 12. r eferences 21Appendices 22Appendix A illustrations 22 Copyright American Society of Safety Engineers Provided by IHS under license

40、with ASSE/SAFE Licensee=CHINA STDS INFORMATION CENTER - avada indx app by/5954931001, User=Zhao Not for Resale, 05/02/2012 01:19:40 MDT No reproduction or networking permitted without license from IHS -,-,- A p p r ov e d A m e r i c a n N a t i o n a l S t a n d a r d AMERICAN SOCIETY OF SAFETY ENG

41、INEERS A S S E ANSI/ASSE Z359.7-2011 American National Standard Qualification and Verification Testing of Fall Protection Products 8 STANDARD REQUIREMENTS 1. SCOPE, PURPOSE, APPLICATIONS, EX- CEPTIONS AND INTERPRETATIONS 1.1 Scope. t his standard specifies requirements for qualification and verifica

42、tion testing of An Si/ ASSe Z359, Fall Protection Code, products. it includes requirements for third-party testing, wit- ness testing and manufacturer testing of fall pro- tection products to the requirements of the An Si/ ASSe Z359 standards. 1.2 Purpose and Application. 1.2.1 t his standard specif

43、ies minimum require- ments for third-party testing laboratories and product manufacturer testing laboratories when testing fall protection products against the An Si/ ASSe Z359 standards. 1.2.2 t his standard specifies minimum require- ments for test equipment and the number of test specimens to be

44、used when testing fall protec- tion products against the An Si/ASSe Z359 stan- dards. 1.2.3 Before any product shall bear an An Si/ ASSe Z359 marking or be represented in any way as being in compliance with any An Si/ASSe Z359 standard, the requirements of this standard as well as the associated pro

45、duct standard shall be met. 1.3 Exceptions. EXPLANATORY INFORMATION (Not part of American National Standard Z359.7) E1.1 It is expected that manufacturers of fall pro- tection products will become compliant with testing practices detailed in this standard within 12 months of the effective date of th

46、is standard. E1.3 The current list of respective product stan- dards, at the time of publication, is as follows: ANSI/ASSE Z359.0, Definitions and Nomenclature Used for Fall Protection and Fall Arrest ANSI/ASSE Z359.1, Safety Requirements for Per- sonal Fall Arrest Systems, Subsystems and Com- ponen

47、ts ANSI/ASSE Z359.2, Minimum Requirements for a Comprehensive Managed Fall Protection Program ANSI/ASSE Z359.3, Safety Requirements for Posi- tioning and Travel Restraint Systems Copyright American Society of Safety Engineers Provided by IHS under license with ASSE/SAFE Licensee=CHINA STDS INFORMATI

48、ON CENTER - avada indx app by/5954931001, User=Zhao Not for Resale, 05/02/2012 01:19:40 MDT No reproduction or networking permitted without license from IHS -,-,-9A p p r ov e d A m e r i c a n N a t i o n a l S t a n d a r d ANSI/ASSE Z359.7-2011 American National Standard Qualification and Verification Testing of Fall Protection Products AMERICAN SOCIETY OF SAFETY ENGINEERS A S S E 1.3.1 Pe