IEC 62488-1-2012 Power line communication systems for power utility applications - Part 1 Planning of analogue and digital power line carrier systems operating .pdf

《IEC 62488-1-2012 Power line communication systems for power utility applications - Part 1 Planning of analogue and digital power line carrier systems operating .pdf》由会员分享，可在线阅读，更多相关《IEC 62488-1-2012 Power line communication systems for power utility applications - Part 1 Planning of analogue and digital power line carrier systems operating .pdf（266页珍藏版）》请在麦多课文档分享上搜索。

1、 IEC 62488-1 Edition 1.0 2012-11 INTERNATIONAL STANDARD NORME INTERNATIONALE Power line communication systems for power utility applications Part 1: Planning of analogue and digital power line carrier systems operating over EHV/HV/MV electricity grids Systmes de communication sur lignes dnergie pour

2、 les applications des compagnies dlectricit Partie 1: Conception des systmes courants porteurs de lignes dnergie analogiques et numriques fonctionnant sur des rseaux dlectricit EHT/HT/MT IEC62488-1:2012 colourinsideTHIS PUBLICATION IS COPYRIGHT PROTECTED Copyright 2012 IEC, Geneva, Switzerland All r

3、ights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either IEC or IECs member National Committee in the country of the req

4、uester. If you have any questions about IEC copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or your local IEC member National Committee for further information. Droits de reproduction rservs. Sauf indication contraire, aucune parti

5、e de cette publication ne peut tre reproduite ni utilise sous quelque forme que ce soit et par aucun procd, lectronique ou mcanique, y compris la photocopie et les microfilms, sans laccord crit de la CEI ou du Comit national de la CEI du pays du demandeur. Si vous avez des questions sur le copyright

6、 de la CEI ou si vous dsirez obtenir des droits supplmentaires sur cette publication, utilisez les coordonnes ci-aprs ou contactez le Comit national de la CEI de votre pays de rsidence. IEC Central Office Tel.: +41 22 919 02 11 3, rue de Varemb Fax: +41 22 919 03 00 CH-1211 Geneva 20 infoiec.ch Swit

7、zerland www.iec.ch About the IEC The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes International Standards for all electrical, electronic and related technologies. About IEC publications The technical content of IEC publications is kep

8、t under constant review by the IEC. Please make sure that you have the latest edition, a corrigenda or an amendment might have been published. Useful links: IEC publications search - www.iec.ch/searchpub The advanced search enables you to find IEC publications by a variety of criteria (reference num

9、ber, text, technical committee,). It also gives information on projects, replaced and withdrawn publications. IEC Just Published - webstore.iec.ch/justpublished Stay up to date on all new IEC publications. Just Published details all new publications released. Available on-line and also once a month

10、by email. Electropedia - www.electropedia.org The worlds leading online dictionary of electronic and electrical terms containing more than 30 000 terms and definitions in English and French, with equivalent terms in additional languages. Also known as the International Electrotechnical Vocabulary (I

11、EV) on-line. Customer Service Centre - webstore.iec.ch/csc If you wish to give us your feedback on this publication or need further assistance, please contact the Customer Service Centre: csciec.ch. A propos de la CEI La Commission Electrotechnique Internationale (CEI) est la premire organisation mo

12、ndiale qui labore et publie des Normes internationales pour tout ce qui a trait llectricit, llectronique et aux technologies apparentes. A propos des publications CEI Le contenu technique des publications de la CEI est constamment revu. Veuillez vous assurer que vous possdez ldition la plus rcente,

13、un corrigendum ou amendement peut avoir t publi. Liens utiles: Recherche de publications CEI - www.iec.ch/searchpub La recherche avance vous permet de trouver des publications CEI en utilisant diffrents critres (numro de rfrence, texte, comit dtudes,). Elle donne aussi des informations sur les proje

14、ts et les publications remplaces ou retires. Just Published CEI - webstore.iec.ch/justpublished Restez inform sur les nouvelles publications de la CEI. Just Published dtaille les nouvelles publications parues. Disponible en ligne et aussi une fois par mois par email. Electropedia - www.electropedia.

15、org Le premier dictionnaire en ligne au monde de termes lectroniques et lectriques. Il contient plus de 30 000 termes et dfinitions en anglais et en franais, ainsi que les termes quivalents dans les langues additionnelles. Egalement appel Vocabulaire Electrotechnique International (VEI) en ligne. Se

16、rvice Clients - webstore.iec.ch/csc Si vous dsirez nous donner des commentaires sur cette publication ou si vous avez des questions contactez-nous: csciec.ch. IEC 62488-1 Edition 1.0 2012-11 INTERNATIONAL STANDARD NORME INTERNATIONALE Power line communication systems for power utility applications P

17、art 1: Planning of analogue and digital power line carrier systems operating over EHV/HV/MV electricity grids Systmes de communication sur lignes dnergie pour les applications des compagnies dlectricit Partie 1: Conception des systmes courants porteurs de lignes dnergie analogiques et numriques fonc

18、tionnant sur des rseaux dlectricit EHT/HT/MT INTERNATIONAL ELECTROTECHNICAL COMMISSION COMMISSION ELECTROTECHNIQUE INTERNATIONALE XF ICS 33.200 PRICE CODE CODE PRIX ISBN 978-2-83220-517-4 Registered trademark of the International Electrotechnical Commission Marque dpose de la Commission Electrotechn

19、ique Internationale Warning! Make sure that you obtained this publication from an authorized distributor. Attention! Veuillez vous assurer que vous avez obtenu cette publication via un distributeur agr. colourinsidenull 2 null 62488-1 null IEC:2012 CONTENTS FOREWORD . 7 INTRODUCTION . 9 1 Scope . 11

20、 2 Terms, definitions and abbreviations 11 2.1 Terms and definitions 11 2.2 Abbreviations 19 3 Power line communication systems 21 3.1 Introduction to PLC . 21 3.2 PLC usage 21 3.3 PLC telecommunication system . 22 3.4 Analogue and digital PLC systems (APLC any IEC National Committee interested in t

21、he subject dealt with may participate in this preparatory work. International, governmental and non-governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditi

22、ons determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC Nation

23、al Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way

24、in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC P

25、ublication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity assessment services and, in some areas, access to IEC marks of conformity. IEC

26、 is not responsible for any services carried out by independent certification bodies. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its

27、technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other

28、 IEC Publications. 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the s

29、ubject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. This International Standard has been prepared by IEC technical committee 57: Power systems management and associated information exchange. This first edition of IEC 62488-1 cancels and replaces

30、the relevant parts of IEC 60663 and IEC 60495, which will be withdrawn at a later date. The text of this standard is based on the following documents: FDIS Report on voting 57/1279/FDIS 57/1298/RVD Full information on the voting for the approval of this standard can be found in the report on voting

31、indicated in the above table. null 8 null 62488-1 null IEC:2012 This publication has been drafted in accordance with the ISO/IEC Directives, Part 2. A list of all parts of IEC 62488 series, under the general title Power line communication systems for power utility applications, can be found on the I

32、EC website. The committee has decided that the contents of this publication will remain unchanged until the stability date indicated on the IEC web site under “http:/webstore.iec.ch“ in the data related to the specific publication. At this date, the publication will be reconfirmed, withdrawn, replac

33、ed by a revised edition, or amended. IMPORTANT The colour inside logo on the cover page of this publication indicates that it contains colours which are considered to be useful for the correct understanding of its contents. Users should therefore print this document using a colour printer. 62488-1 n

34、ull IEC:2012 null 9 null INTRODUCTION The complexity and extensive size of present-day electricity generation, transmission and distribution systems are such that it is possible to control them only by means of an associated and often equally large and complex telecommunication system having a high

35、order of reliability. The control of electrical networks and transmission and reception of data are through a combination of analogue and digital communication systems controlling devices and systems distributed throughout the electrical network. The emergence of digital communication systems for co

36、ntrolling the devices of the electrical distribution network enables faster data transmission. The ability to represent the various electrical parameters as an analogue signal and or digital signal ensures the quality and quantitative aspects of seamless communication to be maintained throughout the

37、 electrical power network. Therefore, by using either analogue power line communication (APLC) or digital power line communication (DPLC) or a combination of both types of system, seamless efficient communication may be maintained throughout the power network. The development of digital techniques f

38、or communications in the electrical distribution networks is now very widespread along with other applications in electronics. This is especially relevant for the electrical distribution network where many of the devices have built into them analogue to digital converters, together with digital sign

39、al processing enabling them to perform many functions and offer fast seamless communication. The conversion of the analogue signal into a binary signal requires the binary digits to be formed into a code for the transmission of the information. These codes take different forms to represent the infor

40、mation to be transmitted. However, the main advantage for this is that digital signals compared with analogue signals provide for virtually error free transmission and the minimum errors that do arise may be detected and corrected by using suitable data encoding techniques. Further, digital transmis

41、sion circuits generally are compatible with the digital devices in the communications circuit. The most commonly used multiplex systems are frequency division multiplex (FDM) and time division multiplex (TDM). The development of the technical report nullPlanning of power line carrier systemsnull was

42、 first produced by the International Electrotechnical Commission through publication IEC 60663 in 1980 entitled Planning of (single sideband) power line carrier systems. In 1993, the International Electrotechnical Commission produced IEC 60495 nullSingle sideband power-line carrier terminalsnull. In

43、 the intervening years, electronic systems and the associated communications systems for electronic devices evolved and developed considerably. The introduction of digital transmission and reception techniques improved the quality of transmission and reception within electronic devices, enabling the

44、m to provide more detailed quality analysis and control of the data being communicated throughout the electricity distribution network, from control centre to service provider. Both of these standards, IEC 60663 and IEC 60495, are being updated and replaced by the following: IEC 60663 is replaced by

45、 IEC 62488-1 and IEC 60495 is replaced by IEC 62488-2, IEC 62488-3, IEC 62488-4, covering respectively analogue, digital power line carrier and broadband power line terminals. The first part of this series is IEC 62488-1. Following this standard, parts IEC 62488-2, IEC 62488-3, IEC 62488-4 will foll

46、ow. During the development of the above mentioned standards, the existing standards IEC 60663 and IEC 60495 will be maintained in use. They will be subsequently phased out at a date to be agreed by the International Electrotechnical Commission in conjunction with IEC technical committee 57. null 10

47、null 62488-1 null IEC:2012 These international standards apply to power line carrier (PLC) terminals used to transmit information over power networks including extra high, high and medium voltage (EHV/HV/MV) power lines. Both analogue and digital modulation systems will be included. IEC 62488 series

48、 consists of the following parts under the general title: Power line communication systems for power utility applications: Part 1: Planning of analogue and digital power line carrier systems operating over EHV/HV/MV electricity grids; Part 2: Analogue power line terminals or APLC; Part 3: Digital po

49、wer line carrier terminals or DPLC; Part 4: Broadband power line systems or BPL. 62488-1 null IEC:2012 null 11 null POWER LINE COMMUNICATION SYSTEMS FOR POWER UTILITY APPLICATIONS Part 1: Planning of analogue and digital power line carrier systems operating over EHV/HV/MV electricity grids 1 Scope This part of IEC 62488 applies to the planning of analogue and digital power line carrier systems operating over EHV/HV/MV electricity grids. The object of this standard i