IEC 62141-2005 Helical-scan digital video cassette recording format using 12 65 mm magnetic tape and incorporating MPEG-4 compression - Type D-16 Format《使用12.65.pdf

《IEC 62141-2005 Helical-scan digital video cassette recording format using 12 65 mm magnetic tape and incorporating MPEG-4 compression - Type D-16 Format《使用12.65.pdf》由会员分享，可在线阅读，更多相关《IEC 62141-2005 Helical-scan digital video cassette recording format using 12 65 mm magnetic tape and incorporating MPEG-4 compression - Type D-16 Format《使用12.65.pdf（234页珍藏版）》请在麦多课文档分享上搜索。

1、 IEC 62141 Edition 1.0 2005-10 INTERNATIONAL STANDARD NORME INTERNATIONALE Helical-scan digital video cassette recording format using 12,65 mm magnetic tape and incorporating MPEG-4 compression Type D-16 format Format denregistrement balayage hlicodal pour cassette vido numrique utilisant une bande

2、magntique de 12,65 mm avec systme de compression MPEG-4 Format D-16 IEC 62141:2005 THIS PUBLICATION IS COPYRIGHT PROTECTED Copyright 2005 IEC, Geneva, Switzerland All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, e

3、lectronic or mechanical, including photocopying and microfilm, without permission in writing from either IEC or IECs member National Committee in the country of the requester. If you have any questions about IEC copyright or have an enquiry about obtaining additional rights to this publication, plea

4、se contact the address below or your local IEC member National Committee for further information. Droits de reproduction rservs. Sauf indication contraire, aucune partie de cette publication ne peut tre reproduite ni utilise sous quelque forme que ce soit et par aucun procd, lectronique ou mcanique,

5、 y compris la photocopie et les microfilms, sans laccord crit de la CEI ou du Comit national de la CEI du pays du demandeur. Si vous avez des questions sur le copyright de la CEI ou si vous dsirez obtenir des droits supplmentaires sur cette publication, utilisez les coordonnes ci-aprs ou contactez l

6、e Comit national de la CEI de votre pays de rsidence. IEC Central Office Tel.: +41 22 919 02 11 3, rue de Varemb Fax: +41 22 919 03 00 CH-1211 Geneva 20 infoiec.ch Switzerland www.iec.ch About the IEC The International Electrotechnical Commission (IEC) is the leading global organization that prepare

7、s and publishes International Standards for all electrical, electronic and related technologies. About IEC publications The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the latest edition, a corrigenda or an amendment might have been

8、published. Useful links: IEC publications search - www.iec.ch/searchpub The advanced search enables you to find IEC publications by a variety of criteria (reference number, text, technical committee,). It also gives information on projects, replaced and withdrawn publications. IEC Just Published - w

9、ebstore.iec.ch/justpublished Stay up to date on all new IEC publications. Just Published details all new publications released. Available on-line and also once a month by email. Electropedia - www.electropedia.org The worlds leading online dictionary of electronic and electrical terms containing mor

10、e than 30 000 terms and definitions in English and French, with equivalent terms in additional languages. Also known as the International Electrotechnical Vocabulary (IEV) on-line. Customer Service Centre - webstore.iec.ch/csc If you wish to give us your feedback on this publication or need further

11、assistance, please contact the Customer Service Centre: csciec.ch. A propos de la CEI La Commission Electrotechnique Internationale (CEI) est la premire organisation mondiale qui labore et publie des Normes internationales pour tout ce qui a trait llectricit, llectronique et aux technologies apparen

12、tes. A propos des publications CEI Le contenu technique des publications de la CEI est constamment revu. Veuillez vous assurer que vous possdez ldition la plus rcente, un corrigendum ou amendement peut avoir t publi. Liens utiles: Recherche de publications CEI - www.iec.ch/searchpub La recherche ava

13、nce vous permet de trouver des publications CEI en utilisant diffrents critres (numro de rfrence, texte, comit dtudes,). Elle donne aussi des informations sur les projets et les publications remplaces ou retires. Just Published CEI - webstore.iec.ch/justpublished Restez inform sur les nouvelles publ

14、ications de la CEI. Just Published dtaille les nouvelles publications parues. Disponible en ligne et aussi une fois par mois par email. Electropedia - www.electropedia.org Le premier dictionnaire en ligne au monde de termes lectroniques et lectriques. Il contient plus de 30 000 termes et dfinitions

15、en anglais et en franais, ainsi que les termes quivalents dans les langues additionnelles. Egalement appel Vocabulaire Electrotechnique International (VEI) en ligne. Service Clients - webstore.iec.ch/csc Si vous dsirez nous donner des commentaires sur cette publication ou si vous avez des questions

16、contactez-nous: csciec.ch. IEC 62141 Edition 1.0 2005-10 INTERNATIONAL STANDARD NORME INTERNATIONALE Helical-scan digital video cassette recording format using 12,65 mm magnetic tape and incorporating MPEG-4 compression Type D-16 format Format denregistrement balayage hlicodal pour cassette vido num

17、rique utilisant une bande magntique de 12,65 mm avec systme de compression MPEG-4 Format D-16 INTERNATIONAL ELECTROTECHNICAL COMMISSION COMMISSION ELECTROTECHNIQUE INTERNATIONALE XD ICS 33.160.40 PRICE CODE CODE PRIX ISBN 978-2-83220-316-3 Registered trademark of the International Electrotechnical C

18、ommission Marque dpose de la Commission Electrotechnique Internationale Warning! Make sure that you obtained this publication from an authorized distributor. Attention! Veuillez vous assurer que vous avez obtenu cette publication via un distributeur agr. 2 62141 IEC:2005 CONTENTS FOREWORD . 6 1 Scop

19、e . 8 2 Normative references . 8 3 Terms, definitions and acronyms 9 3.1 Terms and definitions 9 3.2 Acronyms 10 4 Environment and test conditions . 10 4.1 Calibration tape . 11 4.2 Record locations and dimensions 11 5 Tape and cassette physical specifications 11 5.1 Magnetic tape specifications . 1

20、1 5.2 Cassette specifications 11 6 Tape record physical parameters 32 6.1 Input reference signal 32 6.2 Tape speed . 32 6.3 Helical record physical parameters 32 6.4 Longitudinal record physical parameters . 33 7 Longitudinal track signal and magnetic parameters. 37 7.1 Longitudinal track record par

21、ameters. 37 7.2 Control track record parameters 37 7.3 Time and control code track record parameters . 38 8 Source picture and audio processing 39 8.1 Introduction . 39 8.2 Input formats . 42 8.3 Input data segmentation and shuffling . 44 8.4 Picture data encoding 58 8.5 Data packing . 61 8.6 Audio

22、input format and data packing 75 9 Helical track signal parameters and magnetization . 78 9.1 Introduction . 78 9.2 Video data outer correction and shuffling. 78 9.3 Audio data outer correction and shuffling. 80 9.4 Helical track data parameters 84 9.5 Channel coding . 95 9.6 Magnetization 95 Annex

23、A (normative) Digital interfaces 96 Annex B (informative) Tape transport and scanner 98 Annex C (informative) Compatibility with the other digital formats using Type-L derivative cassettes 101 62141 IEC:2005 3 Figure 1 Top- and side-view dimensions (S-cassette) 14 Figure 2 Bottom-view dimensions (S-

24、cassette) . 15 Figure 3 Datum areas, supporting areas, tape guides and associated dimensions (S-cassette) 17 Figure 4 Reel location in the unlocked position (S-cassette) 17 Figure 5 Protecting lid dimensions (S-cassette) . 18 Figure 6 Reel dimensions (S-cassette) . 19 Figure 7 Reel height in the unl

25、ocked position (S-cassette) . 19 Figure 8 Unlocking lever insertion area (S-cassette) 20 Figure 9 Lid unlocking force (S-cassette) . 21 Figure 10 Lid opening force (S-cassette) 21 Figure 11 Reel spring force (S-cassette) 21 Figure 12 Safety plug strength (S-cassette) . 22 Figure 13 Extraction force

26、(F1, F2) and friction torque (S-cassette) . 22 Figure 14 Top and side views (L-cassette) . 23 Figure 15 Bottom view (L-cassette) 24 Figure 16 Datum areas, supporting areas and tape guides (L-cassette) . 26 Figure 17 Reel location in unlocked position (L-cassette) . 26 Figure 18 Protecting lid (L-cas

27、sette) 27 Figure 19 Reel dimensions (L-cassette) . 28 Figure 20 Reel height in unlocked operation (L-cassette) . 28 Figure 21 Unlocking lever insertion area (L-cassette) . 29 Figure 22 Lid unlocking force (L-cassette) . 30 Figure 23 Lid opening force (L-cassette) 30 Figure 24 Reel spring force (L-ca

28、ssette) 30 Figure 25 Safety plug strength (L-cassette) 31 Figure 26 Extraction force (F1, F2) and friction torque (L-cassette) 31 Figure 27 Locations and dimensions of recorded tracks . 35 Figure 28 Locations and dimensions of tolerance zones of helical track records 36 Figure 29 Recorded control co

29、de waveform . 38 Figure 30 Overall recording block diagram . 39 Figure 31 Overall playback block diagram 40 Figure 32 Type D-16 encoding, one coding channel . 41 Figure 33 Type D-16 encoding, two coding channels . 41 Figure 34 1920 1080/PsF 4:2:2 YC B C Rshuffle blocks 44 Figure 35 1920 1080/PsF 4:4

30、:4 RGB shuffle blocks 45 Figure 36 1920 540/I 4:2:2 YC B C Rshuffle blocks . 46 Figure 37 1920 540/I 4:4:4 RGB shuffle blocks . 47 Figure 38 1280 720/P 4:2:2 YC B C Rframe shuffle blocks 47 Figure 39 1920 1080/PsF 4:2:2 YC B C Rshuffle sets . 48 Figure 40 1920 1080/PsF 4:4:4 RGB shuffle sets 49 Figu

31、re 41 1920 1080/I 4:2:2 YC B C Rshuffle sets 50 Figure 42 1920 1080/I 4:4:4 RGB shuffle sets . 51 4 62141 IEC:2005 Figure 43 1280 720/P 4:2:2 YC B C Rshuffle sets . 52 Figure 44 1920 1080 4:2:2 YC B C Rmacro block unit number allocation 54 Figure 45 1920 1080 4:4:4 RGB macro block unit number alloca

32、tion . 55 Figure 46 1280 720 4:2:2 YC B C Rmacro block unit number allocation 55 Figure 47 1920 1080 ancillary data bursts . 56 Figure 48 1280 720 ancillary data bursts . 56 Figure 49 Ancillary data headers 57 Figure 50 Macro block encoding 59 Figure 51 Basic block format 61 Figure 52 Macro block id

33、entifier byte descriptions 62 Figure 53 Auxiliary data time code . 65 Figure 54 4:2:2 YC B C Rdifferential DC block order 68 Figure 55 4:4:4 RGB differential DC block order 68 Figure 56 4:2:2 DCT code interleave 69 Figure 57 4:2:2 YC B C RDCT macro block interleaving example . 70 Figure 58 4:4:4 DCT

34、 code interleave 70 Figure 59 4:4:4 RGB DCT macro block interleaving example . 71 Figure 60 4:2:2 YC B C RDPCM code word interleave order 71 Figure 61 4:2:2 YC B C RDPCM macro block interleaving example 72 Figure 62 4:4:4 RGB DPCM code word interleave order . 72 Figure 63 4:4:4 RGB DPCM macro block

35、interleaving example 73 Figure 64 1920 1080 packing example 74 Figure 65 1280 720 packing example 74 Figure 66 Start and end sample number of data recording mode 76 Figure 67 Audio auxiliary data words . 77 Figure 68 Video data blocking 79 Figure 69 Audio data blocking for each audio channel . 81 Fi

36、gure 70 Audio sync block alignments on helical tracks 83 Figure 71 General sector arrangement on helical track 84 Figure 72 Sector and segment arrangement on helical track 86 Figure 73 Record unit, segment, channel and track pair counts . 87 Figure 74 Video sync block format . 88 Figure 75 Audio syn

37、c block format . 88 Figure 76 Sync block identification bytes . 89 Figure 77 Sync sequence number 91 Figure A.1 System overview . 96 Figure B.1 Possible scanner configuration (29,97 Hz, 25 Hz, 24 Hz and 23,98 Hz record unit rates) 99 Figure B.2 Possible longitudinal head location and tape wrap (29,9

38、7 Hz, 25 Hz, 24 Hz and 23,98 Hz record unit rates) . 100 Table 1 Tape speeds for each record unit rate . 32 Table 2 Record location and dimensions 34 62141 IEC:2005 5 Table 3 Control track pulse widths . 37 Table 4 Data rates associated with source picture rates . 40 Table 5 1920 1080 ancillary data

39、 line number ranges 42 Table 6 1920 1080 source picture rates 43 Table 7 1280 720 ancillary data line number ranges . 43 Table 8 1280 720 source picture rates 43 Table 9 Shuffle-set allocation . 53 Table 10 Pseudo-random SIZE and RANGE value . 54 Table 11 Ancillary line ID values 58 Table 12 General

40、 coding constraints 59 Table 13 Range for quantizer_scale_code . 60 Table 14 Coded sequence segment numbers . 63 Table 15 Auxiliary basic block data 64 Table 16 Frame-rate flags 65 Table 17 Ancillary data line numbers for 1920 1080 sources . 66 Table 18 Macro block header syntax 67 Table 19 Packing

41、size for each record unit rate 75 Table 20 Sync sequence number and UL . 92 Table A.1 Audio sampling clock ratios 97 Table B.1 Parameters for a possible scanner design 98 Table B.2 Data rate and recorded wavelength 99 6 62141 IEC:2005 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ HELICAL-SCAN DIGITAL

42、VIDEO CASSETTE RECORDING FORMAT USING 12,65 mm MAGNETIC TAPE AND INCORPORATING MPEG-4 COMPRESSION TYPE D-16 FORMAT FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committ

43、ees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Availabl

44、e Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non- governmental organ

45、izations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical m

46、atters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC Nati

47、onal Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity,

48、IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any equipment declared to be in conformity with an IEC Publication. 6) All users should ensure that they have the l