IEC 60384-4-2-2007 Fixed capacitors for use in electronic equipment - Part 4-2 Blank detail specification - Fixed aluminium electrolytic capacitors with solid (.pdf

《IEC 60384-4-2-2007 Fixed capacitors for use in electronic equipment - Part 4-2 Blank detail specification - Fixed aluminium electrolytic capacitors with solid (.pdf》由会员分享，可在线阅读，更多相关《IEC 60384-4-2-2007 Fixed capacitors for use in electronic equipment - Part 4-2 Blank detail specification - Fixed aluminium electrolytic capacitors with solid (.pdf（32页珍藏版）》请在麦多课文档分享上搜索。

1、 IEC 60384-4-2 Edition 2.0 2007-03 INTERNATIONAL STANDARD NORME INTERNATIONALE Fixed capacitors for use in electronic equipment Part 4-2: Blank detail specification Fixed aluminium electrolytic capacitors with solid (MnO 2 ) electrolyte Assessment level EZ Condensateurs fixes utiliss dans les quipem

2、ents lectroniques Partie 4-2: Spcification particulire cadre Condensateurs fixes lectrolytiques laluminium, lectrolyte solide (MnO 2 ) Niveau dassurance EZ IEC 60384-4-2:2007 QC 300302 THIS PUBLICATION IS COPYRIGHT PROTECTED Copyright 2007 IEC, Geneva, Switzerland All rights reserved. Unless otherwi

3、se specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either IEC or IECs member National Committee in the country of the requester. If you have any questi

4、ons about IEC copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or your local IEC member National Committee for further information. Droits de reproduction rservs. Sauf indication contraire, aucune partie de cette publication ne peut

5、 tre reproduite ni utilise sous quelque forme que ce soit et par aucun procd, lectronique ou mcanique, y compris la photocopie et les microfilms, sans laccord crit de la CEI ou du Comit national de la CEI du pays du demandeur. Si vous avez des questions sur le copyright de la CEI ou si vous dsirez o

6、btenir des droits supplmentaires sur cette publication, utilisez les coordonnes ci-aprs ou contactez le Comit national de la CEI de votre pays de rsidence. IEC Central Office 3, rue de Varemb CH-1211 Geneva 20 Switzerland Email: inmailiec.ch Web: www.iec.ch About the IEC The International Electrotec

7、hnical Commission (IEC) is the leading global organization that prepares and publishes International Standards for all electrical, electronic and related technologies. About IEC publications The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you

8、 have the latest edition, a corrigenda or an amendment might have been published. Catalogue of IEC publications: www.iec.ch/searchpub The IEC on-line Catalogue enables you to search by a variety of criteria (reference number, text, technical committee,). It also gives information on projects, withdr

9、awn and replaced publications. IEC Just Published: www.iec.ch/online_news/justpub Stay up to date on all new IEC publications. Just Published details twice a month all new publications released. Available on-line and also by email. Electropedia: www.electropedia.org The worlds leading online diction

10、ary of electronic and electrical terms containing more than 20 000 terms and definitions in English and French, with equivalent terms in additional languages. Also known as the International Electrotechnical Vocabulary online. Customer Service Centre: www.iec.ch/webstore/custserv If you wish to give

11、 us your feedback on this publication or need further assistance, please visit the Customer Service Centre FAQ or contact us: Email: csciec.ch Tel.: +41 22 919 02 11 Fax: +41 22 919 03 00 A propos de la CEI La Commission Electrotechnique Internationale (CEI) est la premire organisation mondiale qui

12、labore et publie des normes internationales pour tout ce qui a trait llectricit, llectronique et aux technologies apparentes. A propos des publications CEI Le contenu technique des publications de la CEI est constamment revu. Veuillez vous assurer que vous possdez ldition la plus rcente, un corrigen

13、dum ou amendement peut avoir t publi. Catalogue des publications de la CEI: www.iec.ch/searchpub/cur_fut-f.htm Le Catalogue en-ligne de la CEI vous permet deffectuer des recherches en utilisant diffrents critres (numro de rfrence, texte, comit dtudes,). Il donne aussi des informations sur les projet

14、s et les publications retires ou remplaces. Just Published CEI: www.iec.ch/online_news/justpub Restez inform sur les nouvelles publications de la CEI. Just Published dtaille deux fois par mois les nouvelles publications parues. Disponible en-ligne et aussi par email. Electropedia: www.electropedia.o

15、rg Le premier dictionnaire en ligne au monde de termes lectroniques et lectriques. Il contient plus de 20 000 termes et dfinitions en anglais et en franais, ainsi que les termes quivalents dans les langues additionnelles. Egalement appel Vocabulaire Electrotechnique International en ligne. Service C

16、lients: www.iec.ch/webstore/custserv/custserv_entry-f.htm Si vous dsirez nous donner des commentaires sur cette publication ou si vous avez des questions, visitez le FAQ du Service clients ou contactez-nous: Email: csciec.ch Tl.: +41 22 919 02 11 Fax: +41 22 919 03 00 IEC 60384-4-2 Edition 2.0 2007-

17、03 INTERNATIONAL STANDARD NORME INTERNATIONALE Fixed capacitors for use in electronic equipment Part 4-2: Blank detail specification Fixed aluminium electrolytic capacitors with solid (MnO 2 ) electrolyte Assessment level EZ Condensateurs fixes utiliss dans les quipements lectroniques Partie 4-2: Sp

18、cification particulire cadre Condensateurs fixes lectrolytiques laluminium, lectrolyte solide (MnO 2 ) Niveau dassurance EZ INTERNATIONAL ELECTROTECHNICAL COMMISSION COMMISSION ELECTROTECHNIQUE INTERNATIONALE N ICS 31.060.50 PRICE CODE CODE PRIX ISBN 2-8318-9904-4 QC 300302 Registered trademark of t

19、he International Electrotechnical Commission Marque dpose de la Commission Electrotechnique Internationale 2 60384-4-2 IEC:2007 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT Part 4-2: Blank detail specification Fixed aluminium electrolytic capacitors wi

20、th solid (MnO 2 ) electrolyte Assessment level EZ FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation

21、on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC

22、Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non- governmental organizations liaising with the IEC also participate in this preparati

23、on. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus

24、 of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are m

25、ade to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications trans

26、parently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC provides no marking procedure to indicate its approval and cannot be

27、 rendered responsible for any equipment declared to be in conformity with an IEC Publication. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members

28、 of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or a

29、ny other IEC Publications. 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may

30、be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. International Standard IEC 60384-4-2 has been prepared by IEC technical committee 40: Capacitors and resistors for electronic equipment. This second edition cancels and replaces the firs

31、t edition published in 1985 and its amendment 1 (1992) and amendment 2 (1996). This edition constitutes a minor revision related to tables, figures and references. This bilingual version, published in 2008, corresponds to the English version. 60384-4-2 IEC:2007 3 The text of this standard is based o

32、n the following documents: CDV Report on voting 40/1763/CDV 40/1821/RVC Full information on the voting for the approval of this standard can be found in the report on voting indicated in the above table. This publication has been drafted in accordance with the ISO/IEC Directives, Part 2. The French

33、version of this standard has not been voted upon. The QC number that appears on the front cover of this publication is the specification number in the IEC Quality Assessment System for Electronic Components (IECQ). The list of all parts of the IEC 60384 series, under the general title Fixed capacito

34、rs for use in electronic equipment, can be found on the IEC website. The committee has decided that the contents of this publication will remain unchanged until the maintenance result date indicated on the IEC web site under “http:/webstore.iec.ch“ in the data related to the specific publication. At

35、 this date, the publication will be reconfirmed, withdrawn, replaced by a revised edition, or amended. 4 60384-4-2 IEC:2007 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT Part 4-2: Blank detail specification Fixed aluminium electrolytic capacitors with solid (MnO 2 ) electrolyte Assessment level E

36、Z Blank detail specification A blank detail specification is a supplementary document to the sectional specification and contains requirements for style and layout and minimum content of detail specifications. Detail specifications not complying with these requirements may not be considered as being

37、 in accordance with IEC specifications nor shall they be so described. In the preparation of detail specifications, the contents of 1.4 of the sectional specification shall be taken into account. The numbers between brackets on the first page correspond to the following information which shall be in

38、serted in the position indicated. Identification of the detail specification 1 The International Electrotechnical Commission or the National Standards Organization under whose authority the detail specification is drafted. 2 The IEC or National Standards number of the detail specification, data of i

39、ssue and any further information required by the national system. 3 The number and issue number of the IEC or national generic specification. 4 The IEC number of the blank detail specification. Identification of the capacitor 5 A short description of the type of capacitor. 6 Information on typical c

40、onstruction (when applicable). NOTE When the capacitor is not designed for use in printed board applications, this is clearly stated in the detail specification in this position. 7 Outline drawing with main dimensions which are of importance for interchangeability and/or reference to the national or

41、 international documents for outlines. Alternatively, this drawing may be given in an annex to the detail specification. 8 Application or group of applications covered and/or assessment level. NOTE The assessment level(s) to be used in a detail specification are selected from 3.5.4 of the sectional

42、specification. This implies that one blank detail specification may be used in combination with several assessment levels, provided the grouping of the tests does not change. 9 Reference data on the most important properties, to allow comparison between the various capacitor types. 60384-4-2 IEC:200

43、7 5 1 IEC 60384-4-2- XXX QC 300302- XXX 2 IEC 60384-4-2 QC 300302 4 ELECTRONIC COMPONENTS OF ASSESSED QUALITY IN ACCORDANCE WITH: IEC 60384-1 IEC 60384-4 3 FIXED ALUMINIUM ELECTROLYTIC CAPACITORS WITH SOLID (MnO 2) ELECTROLYTE 5 6 Outline drawing: (see Table 1) (angle projection) 7 (Other shapes are

44、 permitted within the dimensions given.) Assessment level(s): EZ Performance grade: 8 Information on the availability of components qualified to this detail specification is given in the IEC QC 001005. 9 6 60384-4-2 IEC:2007 1 General data 1.1 Recommended method(s) of mounting (to be inserted) See 1

45、.4.2 of IEC 60384-4. 1.2 Dimensions Table 1 Case size reference and dimensions Dimensions mm Case size reference L H d NOTE 1 When there is no case size reference, Table 1 may be omitted and the dimensions should be given in Table 2, which then becomes Table 1. NOTE 2 The dimensions should be given

46、as maximum dimensions or as nominal dimensions with a tolerance. 1.3 Ratings and characteristics Capacitance range (see Table 2) Tolerance on rated capacitance Rated voltage (see Table 2) Category voltage (if applicable) (see Table 2) Climatic category Rated temperature Rated ripple current (see Tab

47、le 3) Tangent of loss angle (see Table 3) NOTE Instead of the tangent of loss angle (tan ), the equivalent series resistance ESR may be specified in accordance with 4.3.3.2 of IEC 60384-4. Leakage current Impedance (if applicable) (see Table 3) Reverse voltage (if required) Insulation resistance (if

48、 applicable) Table 2 Values of capacitance and of voltage related to case sizes Rated voltage Category voltage* Case size Case size Case size Case size Rated capacitance F* If different from the rated voltage. 60384-4-2 IEC:2007 7 Table 3 Tangent of loss angle, impedance and rated ripple current U R

49、 V C R F Tangent of loss angle at. C,. Hz Impedance at. C, . Hz (if applicable) Rated ripple current at. C,. Hz A1.4 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest ed