IEC TS 60815-3-2008 Selection and dimensioning of high-voltage insulators intended for use in polluted conditions - Part 3 Polymer insulators for a.c systems《污染条件下用高压绝缘子的选择和定尺寸.第3部分 交流系统用聚合体绝缘子》.pdf

《IEC TS 60815-3-2008 Selection and dimensioning of high-voltage insulators intended for use in polluted conditions - Part 3 Polymer insulators for a.c systems《污染条件下用高压绝缘子的选择和定尺寸.第3部分 交流系统用聚合体绝缘子》.pdf》由会员分享，可在线阅读，更多相关《IEC TS 60815-3-2008 Selection and dimensioning of high-voltage insulators intended for use in polluted conditions - Part 3 Polymer insulators for a.c systems《污染条件下用高压绝缘子的选择和定尺寸.第3部分 交流系统用聚合体绝缘子》.pdf（24页珍藏版）》请在麦多课文档分享上搜索。

1、 IEC/TS 60815-3 Edition 1.0 2008-10 TECHNICAL SPECIFICATIONSelection and dimensioning of high-voltage insulators intended for use in polluted conditions Part 3: Polymer insulators for a.c. systems IEC/TS 60815-3:2008(E) THIS PUBLICATION IS COPYRIGHT PROTECTED Copyright 2008 IEC, Geneva, Switzerland

2、All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either IEC or IECs member National Committee in the country of th

3、e requester. If you have any questions about IEC copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or your local IEC member National Committee for further information. Droits de reproduction rservs. Sauf indication contraire, aucune

4、partie de cette publication ne peut tre reproduite ni utilise sous quelque forme que ce soit et par aucun procd, lectronique ou mcanique, y compris la photocopie et les microfilms, sans laccord crit de la CEI ou du Comit national de la CEI du pays du demandeur. Si vous avez des questions sur le copy

5、right de la CEI ou si vous dsirez obtenir des droits supplmentaires sur cette publication, utilisez les coordonnes ci-aprs ou contactez le Comit national de la CEI de votre pays de rsidence. IEC Central Office 3, rue de Varemb CH-1211 Geneva 20 Switzerland Email: inmailiec.ch Web: www.iec.chAbout IE

6、C publications The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the latest edition, a corrigenda or an amendment might have been published. Catalogue of IEC publications: www.iec.ch/searchpub The IEC on-line Catalogue enables you to s

7、earch by a variety of criteria (reference number, text, technical committee,). It also gives information on projects, withdrawn and replaced publications. IEC Just Published: www.iec.ch/online_news/justpub Stay up to date on all new IEC publications. Just Published details twice a month all new publ

8、ications released. Available on-line and also by email. Electropedia: www.electropedia.org The worlds leading online dictionary of electronic and electrical terms containing more than 20 000 terms and definitions in English and French, with equivalent terms in additional languages. Also known as the

9、 International Electrotechnical Vocabulary online. Customer Service Centre: www.iec.ch/webstore/custserv If you wish to give us your feedback on this publication or need further assistance, please visit the Customer Service Centre FAQ or contact us: Email: csciec.ch Tel.: +41 22 919 02 11 Fax: +41 2

10、2 919 03 00 IEC/TS 60815-3 Edition 1.0 2008-10 TECHNICAL SPECIFICATIONSelection and dimensioning of high-voltage insulators intended for use in polluted conditions Part 3: Polymer insulators for a.c. systems INTERNATIONAL ELECTROTECHNICAL COMMISSION R ICS 29.080.10 PRICE CODE ISBN 2-8318-1015-6 Regi

11、stered trademark of the International Electrotechnical Commission 2 TS 60815-3 IEC:2008(E) CONTENTS FOREWORD.3 1 Scope and object5 2 Normative references .5 3 Terms, definitions and abbreviations 6 3.1 Terms and definitions 6 3.2 Abbreviations 6 4 Principles .6 5 Materials 7 5.1 General information

12、on common polymer housing materials 7 5.2 Issues specific to polymer housing materials under pollution.7 5.2.1 Reduction of creepage distance.7 5.2.2 Extreme pollution.8 6 Site severity determination .9 7 Determination of the reference USCD.9 8 General recommendations for polymer profiles.10 9 Check

13、ing of profile parameters.11 9.1 General remark .11 9.2 Alternating sheds and shed overhang12 9.3 Spacing versus shed overhang12 9.4 Minimum distance between sheds .13 9.5 Creepage distance versus clearance.13 9.6 Shed angle14 9.7 Creepage factor 14 10 Correction of RUSCD .14 10.1 Correction for alt

14、itude K a .14 10.2 Correction for insulator diameter K ad .15 11 Determination of the final minimum creepage distance .15 12 Confirmation by testing.15 Annex A (informative) Background information on pollution induced degradation of polymers.17 Bibliography20 Figure 1 RUSCD as a function of SPS clas

15、s 9 Figure 2 Typical “open” profiles10 Figure 3 Typical steep polymeric profile.10 Figure 4 Typical shallow under-ribs on open profile .10 Figure 5 Typical deep under-rib profile.11 Figure 6 Typical “alternating” profiles.11 Figure 7 K adversus average diameter and illustration of parameters.15 Figu

16、re A.1 Operating areas as a function of pollution severity and USCD (for a fixed insulating length) 19 TS 60815-3 IEC:2008(E) 3 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ SELECTION AND DIMENSIONING OF HIGH-VOLTAGE INSULATORS INTENDED FOR USE IN POLLUTED CONDITIONS Part 3: Polymer insulators for a.c

17、. systems FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardizat

18、ion in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is e

19、ntrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non- governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the In

20、ternational Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects sin

21、ce each technical committee has representation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content

22、 of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible

23、in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any equipment

24、declared to be in conformity with an IEC Publication. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its technical committees and IEC Nat

25、ional Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention

26、is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC sha

27、ll not be held responsible for identifying any or all such patent rights. The main task of IEC technical committees is to prepare International Standards. In exceptional circumstances, a technical committee may propose the publication of a technical specification when the required support cannot be

28、obtained for the publication of an International Standard, despite repeated efforts, or The subject is still under technical development or where, for any other reason, there is the future but no immediate possibility of an agreement on an International Standard. Technical specifications are subject

29、 to review within three years of publication to decide whether they can be transformed into International Standards. IEC/TS 60815-3, which is a technical specification, has been prepared by technical committee 36: Insulators. 4 TS 60815-3 IEC:2008(E) The text of this technical specification is based

30、 on the following documents: Enquiry draft Report on voting 36/266/DTS 36/272A/RVC Full information on the voting for the approval of this technical specification can be found in the report on voting indicated in the above table. This publication has been drafted in accordance with the ISO/IEC Direc

31、tives, Part 2. A list of all the parts in the future IEC 60815 series, under the general title Selection and dimensioning of high-voltage insulators intended for use in polluted conditions, can be found on the IEC website. The committee has decided that the contents of this publication will remain u

32、nchanged until the maintenance result date indicated on the IEC web site under “http:/webstore.iec.ch“ in the data related to the specific publication. At this date, the publication will be transformed into an International standard, reconfirmed, withdrawn, replaced by a revised edition, or amended.

33、 A bilingual version of this publication may be issued at a later date. TS 60815-3 IEC:2008(E) 5 SELECTION AND DIMENSIONING OF HIGH-VOLTAGE INSULATORS INTENDED FOR USE IN POLLUTED CONDITIONS Part 3: Polymer insulators for a.c. systems 1 Scope and object IEC/TS 60815-3, which is a technical specifica

34、tion, is applicable to the selection of polymer insulators for a.c. systems, and the determination of their relevant dimensions, to be used in high voltage systems with respect to pollution. This part of IEC/TS 60815 gives specific guidelines and principles to arrive at an informed judgement on the

35、probable behaviour of a given insulator in certain pollution environments. The contents of this technical specification are based on CIGRE 33.13 TF 01 documents 1,2 1 , which form a useful complement to this technical specification for those wishing to study in greater depth the performance of insul

36、ators under pollution. This technical specification does not deal with the effects of snow or ice on polluted insulators. Although this subject is dealt with by CIGRE 3, current knowledge is very limited and practice is too diverse. The object of this technical specification is to give the user mean

37、s to _ determine the reference unified specific creepage distance (USCD) from site pollution severity (SPS) class, choose appropriate profiles, apply correction factors for altitude, insulator shape, size and position, etc. to the reference USCD. 2 Normative references The following referenced docum

38、ents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. IEC 60050-471, International Electrotechnical Vocabulary Part 471: Insulators I

39、EC/TS 60815-1, Selection and dimensioning of high-voltage insulators for polluted conditions Part 1: Definitions, information and general principles IEC/TR 62039, Selection guide for polymeric materials for outdoor use under HV stress IEC/TS 62073, Guidance on the measurement of wettability of insul

40、ator surfaces 1Figures in square brackets refer to the bibliography. 6 TS 60815-3 IEC:2008(E) 3 Terms, definitions and abbreviations 3.1 Terms and definitions For the purposes of this document, the following terms, definitions and abbreviations apply. The definitions given below are those which eith

41、er do not appear in IEC 60050-471 or differ from those given in IEC 60050-471. 3.1.1 unified specific creepage distance USCD creepage distance of an insulator divided by the r.m.s. value of the highest operating voltage across the insulator NOTE 1 This definition differs from that of specific creepa

42、ge distance where the line-to-line value of the highest voltage for the equipment is used (for a.c. systems usually U m / 3). For line-to-earth insulation, this definition will result in a value that is 3 times that given by the definition of specific creepage distance in IEC/TR 60815 (1986). NOTE 2

43、 For U m see IEV 604-03-01 3. NOTE 3 It is generally expressed in mm/kV and usually expressed as a minimum. 3.1.2 reference unified specific creepage distance RUSCD initial value of unified specific creepage distance for a pollution site before correction for size, profile, mounting position, etc. a

44、ccording to this technical specification and generally expressed in mm/kV 3.2 Abbreviations CF creepage factor ESDD equivalent salt deposit density HTM hydrophobicity transfer material NSDD non-soluble deposit density SDD salt deposit density SES site equivalent salinity SOR safe operating regions S

45、PS site pollution severity USCD unified specific creepage distance RUSCD reference unified specific creepage distance 4 Principles The overall process of insulation selection and dimensioning can be summarized as follows: Firstly, using IEC/TS 60815-1: determine the appropriate approach 1, 2 or 3 as

46、 a function of available knowledge, time and resources; collect the necessary input data, notably system voltage, insulation application type (line, post, bushing, etc.); collect the necessary environmental data, notably site pollution severity and class. At this stage a preliminary choice of possib

47、le candidate insulators suitable for the applications and environment may be made. TS 60815-3 IEC:2008(E) 7 Then, using this technical specification: refine choice of possible candidate polymer insulators suitable for the environment; determine the reference USCD for the insulator types and material

48、s, either using the indications in the this technical specification, or from service or test station experience in the case of approach 1 (Clause 7); choose suitable profiles for the type of environment (Clause 8); verify that the profile satisfies certain parameters, with correction or action accor

49、ding to the degree of deviation (Clause 9); modify, where necessary (approaches 2 and 3), of the reference USCD by factors depending on the size, profile, orientation, etc. of the candidate insulator (Clauses 10 and 11); verify that the resulting candidate insulators satisfy the other system and line requirements such as those given in Table 2 of IEC/TS 60815-1 (e.g. imposed geometry, dimensions, economics); verify the