IEC 62999-2016 Electric room heating - Underfloor heating - Performance characteristics - Definitions method of testing sizing and formula symbols《电热室 地板下供暖 性能特点 定义 试验方法 尺寸和公式符号》.pdf

《IEC 62999-2016 Electric room heating - Underfloor heating - Performance characteristics - Definitions method of testing sizing and formula symbols《电热室 地板下供暖 性能特点 定义 试验方法 尺寸和公式符号》.pdf》由会员分享，可在线阅读，更多相关《IEC 62999-2016 Electric room heating - Underfloor heating - Performance characteristics - Definitions method of testing sizing and formula symbols《电热室 地板下供暖 性能特点 定义 试验方法 尺寸和公式符号》.pdf（126页珍藏版）》请在麦多课文档分享上搜索。

1、 IEC 62999 Edition 1.0 2016-02 INTERNATIONAL STANDARD NORME INTERNATIONALE Electric room heating Underfloor heating Performance characteristics Definitions, method of testing, sizing and formula symbols Chauffage lectrique de locaux Chauffage par le sol Caractristiques de performance Dfinitions, mth

2、ode dessai, calibrage et symboles de formule IEC 62999:2016-02(en-fr) THIS PUBLICATION IS COPYRIGHT PROTECTED Copyright 2016 IEC, Geneva, Switzerland All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or

3、mechanical, including photocopying and microfilm, without permission in writing from either IEC or IECs member National Committee in the country of the requester. If you have any questions about IEC copyright or have an enquiry about obtaining additional rights to this publication, please contact th

4、e address below or your local IEC member National Committee for further information. Droits de reproduction rservs. Sauf indication contraire, aucune partie de cette publication ne peut tre reproduite ni utilise sous quelque forme que ce soit et par aucun procd, lectronique ou mcanique, y compris la

5、 photocopie et les microfilms, sans laccord crit de lIEC ou du Comit national de lIEC du pays du demandeur. Si vous avez des questions sur le copyright de lIEC ou si vous dsirez obtenir des droits supplmentaires sur cette publication, utilisez les coordonnes ci-aprs ou contactez le Comit national de

6、 lIEC de votre pays de rsidence. IEC Central Office Tel.: +41 22 919 02 11 3, rue de Varemb Fax: +41 22 919 03 00 CH-1211 Geneva 20 infoiec.ch Switzerland www.iec.ch About the IEC The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes Inter

7、national Standards for all electrical, electronic and related technologies. About IEC publications The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the latest edition, a corrigenda or an amendment might have been published. IEC Catalo

8、gue - webstore.iec.ch/catalogue The stand-alone application for consulting the entire bibliographical information on IEC International Standards, Technical Specifications, Technical Reports and other documents. Available for PC, Mac OS, Android Tablets and iPad. IEC publications search - www.iec.ch/

9、searchpub The advanced search enables to find IEC publications by a variety of criteria (reference number, text, technical committee,). It also gives information on projects, replaced and withdrawn publications. IEC Just Published - webstore.iec.ch/justpublished Stay up to date on all new IEC public

10、ations. Just Published details all new publications released. Available online and also once a month by email. Electropedia - www.electropedia.org The worlds leading online dictionary of electronic and electrical terms containing 20 000 terms and definitions in English and French, with equivalent te

11、rms in 15 additional languages. Also known as the International Electrotechnical Vocabulary (IEV) online. IEC Glossary - std.iec.ch/glossary 65 000 electrotechnical terminology entries in English and French extracted from the Terms and Definitions clause of IEC publications issued since 2002. Some e

12、ntries have been collected from earlier publications of IEC TC 37, 77, 86 and CISPR. IEC Customer Service Centre - webstore.iec.ch/csc If you wish to give us your feedback on this publication or need further assistance, please contact the Customer Service Centre: csciec.ch. A propos de lIEC La Commi

13、ssion Electrotechnique Internationale (IEC) est la premire organisation mondiale qui labore et publie des Normes internationales pour tout ce qui a trait llectricit, llectronique et aux technologies apparentes. A propos des publications IEC Le contenu technique des publications IEC est constamment r

14、evu. Veuillez vous assurer que vous possdez ldition la plus rcente, un corrigendum ou amendement peut avoir t publi. Catalogue IEC - webstore.iec.ch/catalogue Application autonome pour consulter tous les renseignements bibliographiques sur les Normes internationales, Spcifications techniques, Rappor

15、ts techniques et autres documents de lIEC. Disponible pour PC, Mac OS, tablettes Android et iPad. Recherche de publications IEC - www.iec.ch/searchpub La recherche avance permet de trouver des publications IEC en utilisant diffrents critres (numro de rfrence, texte, comit dtudes,). Elle donne aussi

16、des informations sur les projets et les publications remplaces ou retires. IEC Just Published - webstore.iec.ch/justpublished Restez inform sur les nouvelles publications IEC. Just Published dtaille les nouvelles publications parues. Disponible en ligne et aussi une fois par mois par email. Electrop

17、edia - www.electropedia.org Le premier dictionnaire en ligne de termes lectroniques et lectriques. Il contient 20 000 termes et dfinitions en anglais et en franais, ainsi que les termes quivalents dans 15 langues additionnelles. Egalement appel Vocabulaire Electrotechnique International (IEV) en lig

18、ne. Glossaire IEC - std.iec.ch/glossary 65 000 entres terminologiques lectrotechniques, en anglais et en franais, extraites des articles Termes et Dfinitions des publications IEC parues depuis 2002. Plus certaines entres antrieures extraites des publications des CE 37, 77, 86 et CISPR de lIEC. Servi

19、ce Clients - webstore.iec.ch/csc Si vous dsirez nous donner des commentaires sur cette publication ou si vous avez des questions contactez-nous: csciec.ch. IEC 62999 Edition 1.0 2016-02 INTERNATIONAL STANDARD NORME INTERNATIONALE Electric room heating Underfloor heating Performance characteristics D

20、efinitions, method of testing, sizing and formula symbols Chauffage lectrique de locaux Chauffage par le sol Caractristiques de performance Dfinitions, mthode dessai, calibrage et symboles de formule INTERNATIONAL ELECTROTECHNICAL COMMISSION COMMISSION ELECTROTECHNIQUE INTERNATIONALE ICS 97.100.10 I

21、SBN 978-2-8322-3213-2 Registered trademark of the International Electrotechnical Commission Marque dpose de la Commission Electrotechnique Internationale Warning! Make sure that you obtained this publication from an authorized distributor. Attention! Veuillez vous assurer que vous avez obtenu cette

22、publication via un distributeur agr. 2 IEC 62999:2016 IEC 2016 CONTENTS FOREWORD 6 1 Scope .8 2 Normative references 8 3 Terms and definitions 8 4 Method of testing for the determination of characteristics of performance . 16 4.1 General 16 4.2 Standard heating load per unit area . 16 4.3 Maximum po

23、wer rating per unit area 16 4.4 Maximum surface temperature 17 4.5 Maximum floor surface temperature for underfloor storage heating 18 4.6 Room air temperature . 19 4.7 Internal surface temperatures on the surrounding surfaces of the room 20 4.8 Thermal pre-conditioning of the room to be tested . 20

24、 4.9 Floor temperature in the case of continuous local hot spots . 21 4.10 Floor temperature of underfloor storage heating through failure of a switching, controlling or regulation apparatus 23 4.11 Floor temperature of controlled underfloor heating and underfloor direct heating through failure of a

25、 switching, controlling or regulation apparatus 23 4.12 Regulation of room temperature using peripheral areas for underfloor storage heating . 23 4.13 Regulation of room temperature using controlled underfloor heating and underfloor direct heating . 23 4.14 Regulation of room temperature using under

26、floor warming . 24 4.15 Relationship of coefficients of heat transfer . 24 4.16 Insulating layers 24 4.17 Edging insulation strips . 25 4.18 Damp-proofing 25 4.19 Electrical auxiliary heating 26 4.20 Load distribution layer in electrical underfloor heating . 26 4.21 Bedding in or under heating scree

27、d or directly below floor covering . 26 4.22 Dry laying of electrical heating elements 26 4.23 Heating element 26 4.24 Heating cable and laminar heating element . 26 4.24.1 Heating cable for bedding in or under screeding or directly below floor covering. 26 4.24.2 Heating cable for dry laying 26 4.2

28、4.3 Laminar heating elements for installation below or in screeding 27 4.25 Characteristics of heating cables . 27 4.26 Characteristics of laminar heating elements 27 4.27 Cold tails 27 4.28 Point of connection . 27 4.29 Bending radius of the heating cable . 27 4.30 Heating element labelling 27 4.31

29、 Pulsation factor . 27 4.32 Installation of heating elements for underfloor direct heating 28 4.33 Adhesive and fixing material 28 4.34 Permanent installation areas . 28 IEC 62999:2016 IEC 2016 3 4.35 Pre-heating of screeding . 28 4.36 Floor coverings . 28 4.37 Control and regulation equipment 28 4.

30、38 Control and regulation equipment for underfloor storage heating . 28 4.39 Control and regulation equipment for controlled underfloor heating and underfloor direct heating . 28 4.40 Floor temperature measurement 29 4.41 Auxiliary supply period 29 4.42 Period of room use 29 4.43 Insulation and diel

31、ectric resistance of the heating element . 29 4.44 Instructions for construction workers . 29 4.44.1 Protective measures when pouring flooring screed . 29 4.44.2 Pouring the screed . 29 4.45 Data for owner and user of the building . 29 4.46 Report of testing . 30 Annex A (informative) Sizing procedu

32、re Range of application and purpose 31 A.1 General 31 A.2 Basic principles Basic parameters of the room to be heated 31 A.2.1 General . 31 A.2.2 Standard heat load of an underfloor heated room . 31 A.2.3 Standard heating load per unit area . 31 A.2.4 Effective heat storage capacity of the room to be

33、 heated 32 A.2.5 Peripheral conditions and limiting values 32 A.3 Sizing an underfloor heating system 33 A.3.1 Storage layer depth of an underfloor heating system 33 A.3.2 Heat load coverage for the underfloor heated room 33 Annex B (informative) Sizing procedure Examples of sizing procedure of an u

34、nderfloor storage heating system Example for a living area 48 B.1 General 48 B.2 Standard heat load of an underfloor heated room N Q 48 B.3 Standard heat load per unit area N q 48 B.4 Storage mass per unit external area of the room m/A a. 48 B.5 Thickness of storage layer 49 B.6 Relation of coeffici

35、ents of conductivity . 49 B.7 Maximum rating per unit area F P . 50 B.8 Limited rating per unit area FE P 50 B.9 Heating floor area A F50 B.10 Permissible rating P ZUL50 B.11 Rating of the room P . 51 B.12 Rating per unit area IN P 51 B.13 Mean heating capacity F Q 51 B.14 Auxiliary heating capacity

36、 Z Q . 51 B.15 Auxiliary heat rating 52 Annex C (informative) Sizing procedure Example of sizing procedure of an underfloor direct heating system Example for a living area . 53 C.1 General 53 4 IEC 62999:2016 IEC 2016 C.2 Design heating capacity H Q of a room with underfloor direct heating . 53 C.3

37、Design heating capacity per unit area H q 53 C.4 Depth of the heating screed 54 C.5 Relation of coefficients of conductivity . 54 C.6 Maximum rating per unit area F P . 55 C.7 Limited rating per unit area FE P 55 C.8 Heating floor area A F55 C.9 Permissible rating P ZUL56 C.10 Rating of the room P .

38、 56 C.11 Rating per unit area IN P 56 C.12 Mean heating capacity F Q 56 C.13 Auxiliary heating capacity Z Q 56 C.14 Formula symbols and units 56 Figure 1 Layout diagram of an underfloor heating system . 14 Figure 2 Construction A, cross-section A B 14 Figure 3 Construction B, cross-section A B 15 Fi

39、gure 4 Construction C, cross-section A B . 15 Figure 5 Examples for the effect of floor excess temperature T E. 18 Figure 6 Basic circuit diagram of underfloor storage heating . 19 Figure 7 Underfloor direct heating, controlled underfloor heating and warming Example of a circuit for individual room

40、regulation (rooms have one heating circuit each) 21 Figure 8 Construction of model 22 Figure A.1 Monogram for determining the storage layer depth 32 Figure A.2 Electric underfloor storage heating, sizing chart 34 Figure A.3 Electric underfloor direct and controlled heating, sizing chart . 35 Figure

41、A.4 Plan of basement 43 Figure A.5 Plan of ground floor 44 Figure A.6 Plan of upper floor 45 Figure A.7 Cross-section A B 46 Figure A.8 Cross-section C D 47 Figure B.1 Ceiling construction 48 Figure C.1 Ceiling construction 53 Table 1 Minimum coefficient of heat transfer and minimum resistance to th

42、ermal conductivity of construction elements 25 Table A.1 0K 1 1 = 36 Table A.2 5K 1 1 = 36 Table A.3 K 0 1 1 1 = . 37 Table A.4 K 5 1 1 1 = . 37 Table A.5 K 0 2 1 1 = 38 IEC 62999:2016 IEC 2016 5 Table A.6 K 0 3 1 1 = 38 Table A.7 K 5 3 1 1 = 39 Table A.8 K 8 3 1 1 = 39 Table B.1 Determination of he

43、at conductivity coefficient U o49 Table B.2 Determination of heat conductivity coefficient U u50 Table C.1 Determination of heat conductivity coefficient U o54 Table C.2 Determination of heat conductivity coefficient U u55 6 IEC 62999:2016 IEC 2016 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ ELECTRI

44、C ROOM HEATING UNDERFLOOR HEATING PERFORMANCE CHARACTERISTICS DEFINITIONS, METHOD OF TESTING, SIZING AND FORMULA SYMBOLS FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National C

45、ommittees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Av

46、ailable Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non- governmental

47、 organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on techn

48、ical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end use