IEC 62680-4-2013 Universal Serial Bus interfaces for data and power - Part 4 Universal Serial Bus Cables and Connectors Class Document Revision 2.0《数据和电源的通用串行总线接口 第4部分 通用串行总线电缆和连接器类 文件修订版本2.0.pdf

《IEC 62680-4-2013 Universal Serial Bus interfaces for data and power - Part 4 Universal Serial Bus Cables and Connectors Class Document Revision 2.0《数据和电源的通用串行总线接口 第4部分 通用串行总线电缆和连接器类 文件修订版本2.0.pdf》由会员分享，可在线阅读，更多相关《IEC 62680-4-2013 Universal Serial Bus interfaces for data and power - Part 4 Universal Serial Bus Cables and Connectors Class Document Revision 2.0《数据和电源的通用串行总线接口 第4部分 通用串行总线电缆和连接器类 文件修订版本2.0.pdf（98页珍藏版）》请在麦多课文档分享上搜索。

1、 IEC 62680-4 Edition 1.0 2013-06 INTERNATIONAL STANDARD NORME INTERNATIONALE Universal serial bus interfaces for data and power Part 4: Universal Serial Bus Cables and Connectors Class Document, Revision 2.0 Interfaces de bus universel en srie pour les donnes et lalimentation lectrique Partie 4: Doc

2、ument des classes des cbles et des connecteurs de bus universel en srie, Rvision 2.0 IEC 62680-4:2013 colour inside THIS PUBLICATION IS COPYRIGHT PROTECTED Copyright 2013 IEC, Geneva, Switzerland All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utiliz

3、ed in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either IEC or IECs member National Committee in the country of the requester. If you have any questions about IEC copyright or have an enquiry about obtaining additional

4、 rights to this publication, please contact the address below or your local IEC member National Committee for further information. Droits de reproduction rservs. Sauf indication contraire, aucune partie de cette publication ne peut tre reproduite ni utilise sous quelque forme que ce soit et par aucu

5、n procd, lectronique ou mcanique, y compris la photocopie et les microfilms, sans laccord crit de la CEI ou du Comit national de la CEI du pays du demandeur. Si vous avez des questions sur le copyright de la CEI ou si vous dsirez obtenir des droits supplmentaires sur cette publication, utilisez les

6、coordonnes ci-aprs ou contactez le Comit national de la CEI de votre pays de rsidence. IEC Central Office Tel.: +41 22 919 02 11 3, rue de Varemb Fax: +41 22 919 03 00 CH-1211 Geneva 20 infoiec.ch Switzerland www.iec.ch About the IEC The International Electrotechnical Commission (IEC) is the leading

7、 global organization that prepares and publishes International Standards for all electrical, electronic and related technologies. About IEC publications The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the latest edition, a corrigenda

8、 or an amendment might have been published. Useful links: IEC publications search - www.iec.ch/searchpub The advanced search enables you to find IEC publications by a variety of criteria (reference number, text, technical committee,). It also gives information on projects, replaced and withdrawn pub

9、lications. IEC Just Published - webstore.iec.ch/justpublished Stay up to date on all new IEC publications. Just Published details all new publications released. Available on-line and also once a month by email. Electropedia - www.electropedia.org The worlds leading online dictionary of electronic an

10、d electrical terms containing more than 30 000 terms and definitions in English and French, with equivalent terms in additional languages. Also known as the International Electrotechnical Vocabulary (IEV) on-line. Customer Service Centre - webstore.iec.ch/csc If you wish to give us your feedback on

11、this publication or need further assistance, please contact the Customer Service Centre: csciec.ch. A propos de la CEI La Commission Electrotechnique Internationale (CEI) est la premire organisation mondiale qui labore et publie des Normes internationales pour tout ce qui a trait llectricit, llectro

12、nique et aux technologies apparentes. A propos des publications CEI Le contenu technique des publications de la CEI est constamment revu. Veuillez vous assurer que vous possdez ldition la plus rcente, un corrigendum ou amendement peut avoir t publi. Liens utiles: Recherche de publications CEI - www.

13、iec.ch/searchpub La recherche avance vous permet de trouver des publications CEI en utilisant diffrents critres (numro de rfrence, texte, comit dtudes,). Elle donne aussi des informations sur les projets et les publications remplaces ou retires. Just Published CEI - webstore.iec.ch/justpublished Res

14、tez inform sur les nouvelles publications de la CEI. Just Published dtaille les nouvelles publications parues. Disponible en ligne et aussi une fois par mois par email. Electropedia - www.electropedia.org Le premier dictionnaire en ligne au monde de termes lectroniques et lectriques. Il contient plu

15、s de 30 000 termes et dfinitions en anglais et en franais, ainsi que les termes quivalents dans les langues additionnelles. Egalement appel Vocabulaire Electrotechnique International (VEI) en ligne. Service Clients - webstore.iec.ch/csc Si vous dsirez nous donner des commentaires sur cette publicati

16、on ou si vous avez des questions contactez-nous: csciec.ch. IEC 62680-4 Edition 1.0 2013-06 INTERNATIONAL STANDARD NORME INTERNATIONALE Universal serial bus interfaces for data and power Part 4: Universal Serial Bus Cables and Connectors Class Document, Revision 2.0 Interfaces de bus universel en sr

17、ie pour les donnes et lalimentation lectrique Partie 4: Document des classes des cbles et des connecteurs de bus universel en srie, Rvision 2.0 INTERNATIONAL ELECTROTECHNICAL COMMISSION COMMISSION ELECTROTECHNIQUE INTERNATIONALE X ICS 33.120; 35.200 PRICE CODE CODE PRIX ISBN 978-2-83220-843-4 Regist

18、ered trademark of the International Electrotechnical Commission Marque dpose de la Commission Electrotechnique Internationale Warning! Make sure that you obtained this publication from an authorized distributor. Attention! Veuillez vous assurer que vous avez obtenu cette publication via un distribut

19、eur agr. colour inside 2 62680-4 IEC:2013 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ UNIVERSAL SERIAL BUS INTERFACES FOR DATA AND POWER Part 4: Universal Serial Bus Cables and Connectors Class Document, Revision 2.0 FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide orga

20、nization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities,

21、 IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt

22、with may participate in this preparatory work. International, governmental and non- governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined b

23、y agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees. 3

24、) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they ar

25、e used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and t

26、he corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsi

27、ble for any services carried out by independent certification bodies. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its technical commit

28、tees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publication

29、s. 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent

30、 rights. IEC shall not be held responsible for identifying any or all such patent rights. International Standard IEC 62680-4 has been prepared by technical area 14: Interfaces and methods of measurement for personal computing equipment, of IEC technical committee 100: Audio, video and multimedia sys

31、tems and equipment. The text of this standard is based on documents prepared by the USB Implementers Forum (USB-IF). The structure and editorial rules used in this publication reflect the practice of the organization which submitted it. 62680-4 IEC:2013 3 The text of this standard is based on the fo

32、llowing documents: CDV Report on voting 100/1984/CDV 100/2065/RVC Full information on the voting for the approval of this standard can be found in the report on voting indicated in the above table. A list of all the parts in the IEC 62680 series, published under the general title Universal serial bu

33、s interfaces for data and power can be found on the IEC website. The committee has decided that the contents of this publication will remain unchanged until the stability date indicated on the IEC web site under “http:/webstore.iec.ch“ in the data related to the specific publication. At this date, t

34、he publication will be reconfirmed, withdrawn, replaced by a revised edition, or amended. IMPORTANT The colour inside logo on the cover page of this publication indicates that it contains colours which are considered to be useful for the correct understanding of its contents. Users should therefore

35、print this document using a colour printer. 4 62680-4 IEC:2013 INTRODUCTION The IEC 62680 series is based on a series of specifications that were originally developed by the USB Implementers Forum (USB-IF). These specifications were submitted to the IEC under the auspices of a special agreement betw

36、een the IEC and the USB IF. The USB Implementers Forum, Inc.(USB-IF) is a non-profit corporation founded by the group of companies that developed the Universal Serial Bus specification. The USB-IF was formed to provide a support organization and forum for the advancement and adoption of Universal Se

37、rial Bus technology. The Forum facilitates the development of high-quality compatible USB peripherals (devices), and promotes the benefits of USB and the quality of products that have passed compliance testing. ANY USB SPECIFICATIONS ARE PROVIDED TO YOU “AS IS, “WITH NO WARRANTIES WHATSOEVER, INCLUD

38、ING ANY WARRANTY OF MERCHANTABILITY, NON- INFRINGEMENT, OR FITNESS FOR ANY PARTICULAR PURPOSE. THE USB IMPLEMENTERS FORUM AND THE AUTHORS OF ANY USB SPECIFICATIONS DISCLAIM ALL LIABILITY, INCLUDING LIABILITY FOR INFRINGEMENT OF ANY PROPRIETARY RIGHTS, RELATING TO USE OR IMPLEMENTATION OR INFORMATION

39、 IN THIS SPECIFICAITON. THE PROVISION OF ANY USB SPECIFICATIONS TO YOU DOES NOT PROVIDE YOU WITH ANY LICENSE, EXPRESS OR IMPLIED, BY ESTOPPEL OR OTHERWISE, TO ANY INTELLECTUAL PROPERTY RIGHTS. Entering into USB Adopters Agreements may, however, allow a signing company to participate in a reciprocal,

40、 royalty-free licensing arrangement for compliant products. For more information, please see: http:/www.usb.org/developers/docs/ http:/www.usb.org/developers/devclass_docs#approved IEC DOES NOT TAKE ANY POSITION AS TO WHETHER IT IS ADVISABLE FOR YOU TO ENTER INTO ANY USB ADOPTERS AGREEMENTS OR TO PA

41、RTICIPATE IN THE USB IMPLEMENTERS FORUM.” This series covers the Universal Series Bus interfaces for data and power and consists of the following parts: IEC 62680-1, Universal Serial Bus interfaces for data and power Part 1: Universal Serial Bus Specification, Revision 2.0 IEC 62680-2, Universal Ser

42、ial Bus interfaces for data and power Part 2: USB Micro-USB Cables and Connectors Specification, Revision 1.01 IEC 62680-3, Universal Serial Bus interfaces for data and power Part 3: USB Battery Charging Specification, Revision 1.2 IEC 62680-4, Universal Serial Bus interfaces for data and power Part

43、 4: Universal Serial Bus Cables and Connectors Class Document Revision. 2.0 This part of the IEC 62680 series consists of several distinct parts: the main body of the text, which consists of the original specification developed by the USB-IF. 62680-4 IEC:2013 5 CONTENTS 1 Introduction 10 1.1 Purpose

44、 10 1.2 Scope 10 1.3 Related Documents . 10 1.4 Terms and Abbreviations . 11 2 Management Overview . 12 3 USB Electrical, Mechanical and Environmental Compliance Standards . 12 4 Acceptance Criteria, Test Methods and Test Procedures 15 4.1 Integrators List (IL) 15 4.2 USB Logo Usage . 16 4.3 Complia

45、nce Test Report 16 4.4 Connector and Cable Assembly Physical Certification . 16 4.5 General Information . 16 4.5.1 Mated Pairs . 16 4.5.2 Before Testing . 16 4.5.3 Test Sequences . 16 4.6 Sample Selection 17 4.7 USB Compliance Testing Interval 17 4.8 Primary Qualification Approval Testing 17 4.9 Sus

46、taining Qualification Approval Testing 17 4.10 Compliance Test Sequences . 17 4.10.1 Inspection EIA 364-18 . 17 4.10.2 Test Group 1 19 4.10.3 Test Group 2 20 4.10.4 Test Group 3 21 4.10.5 Test Group 4 21 4.10.6 Test Group 5 23 4.10.7 Test Group 6 23 4.10.8 Test Group 7 24 4.10.9 Test Group 8 24 5 Ce

47、rtification Acceptance and Submission . 25 5.1 Compliance Test Report 25 5.2 Listing, Authorization and Notification 25 5.2.1 Listing . 25 5.2.2 Authorization to use Certified USB Logo 25 5.2.3 Notification 26 Appendices . 27 A Testing by Similarity General Guidelines 27 B Critical Dimensions . 30 6

48、 62680-4 IEC:2013 Universal Serial Bus Cables and Connectors Specification Revision 2.0 August, 2007 Revision History Revision Date Filename Comment 2.0 RC6 August 10, 2007 CabConnRC6_Aug10.doc Added Go/No-go & latch measurement for Micro series Added Drain wire inspection process Added pin contact

49、visual inspection Added clarifying text to 4-axis test description 2.0 RC5 June 5, 2007 CabConn20RC5_June5 Removed Shielding Effectiveness Replace Rotational Continuity with 4-Axis continuity Other miscellaneous minor changes 2.0 RC4 May, 2007 CabConn20RC4_May07 Cable Construction inspection added 2.0 April 4, 2007 CabConn20 Removed Shielding Effectiveness, Added power line resistance test Added cable rotation te