IEC 62629-22-1-2016 3D display devices - Part 22-1 Measuring methods for autostereoscopic displays - Optical《三维显示装置.第22-1部分 自动分光立体显示用测量方法.光学》.pdf

《IEC 62629-22-1-2016 3D display devices - Part 22-1 Measuring methods for autostereoscopic displays - Optical《三维显示装置.第22-1部分 自动分光立体显示用测量方法.光学》.pdf》由会员分享，可在线阅读，更多相关《IEC 62629-22-1-2016 3D display devices - Part 22-1 Measuring methods for autostereoscopic displays - Optical《三维显示装置.第22-1部分 自动分光立体显示用测量方法.光学》.pdf（50页珍藏版）》请在麦多课文档分享上搜索。

1、 IEC 62629-22-1 Edition 2.0 2016-10 INTERNATIONAL STANDARD 3D display devices Part 22-1: Measuring methods for autostereoscopic displays Optical IEC 62629-22-1:2016-10(en) THIS PUBLICATION IS COPYRIGHT PROTECTED Copyright 2016 IEC, Geneva, Switzerland All rights reserved. Unless otherwise specified,

2、 no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either IEC or IECs member National Committee in the country of the requester. If you have any questions about IEC

3、 copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or your local IEC member National Committee for further information. IEC Central Office Tel.: +41 22 919 02 11 3, rue de Varemb Fax: +41 22 919 03 00 CH-1211 Geneva 20 infoiec.ch Swi

4、tzerland www.iec.ch About the IEC The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes International Standards for all electrical, electronic and related technologies. About IEC publications The technical content of IEC publications is ke

5、pt under constant review by the IEC. Please make sure that you have the latest edition, a corrigenda or an amendment might have been published. IEC Catalogue - webstore.iec.ch/catalogue The stand-alone application for consulting the entire bibliographical information on IEC International Standards,

6、Technical Specifications, Technical Reports and other documents. Available for PC, Mac OS, Android Tablets and iPad. IEC publications search - www.iec.ch/searchpub The advanced search enables to find IEC publications by a variety of criteria (reference number, text, technical committee,). It also gi

7、ves information on projects, replaced and withdrawn publications. IEC Just Published - webstore.iec.ch/justpublished Stay up to date on all new IEC publications. Just Published details all new publications released. Available online and also once a month by email. Electropedia - www.electropedia.org

8、 The worlds leading online dictionary of electronic and electrical terms containing 20 000 terms and definitions in English and French, with equivalent terms in 15 additional languages. Also known as the International Electrotechnical Vocabulary (IEV) online. IEC Glossary - std.iec.ch/glossary 65 00

9、0 electrotechnical terminology entries in English and French extracted from the Terms and Definitions clause of IEC publications issued since 2002. Some entries have been collected from earlier publications of IEC TC 37, 77, 86 and CISPR. IEC Customer Service Centre - webstore.iec.ch/csc If you wish

10、 to give us your feedback on this publication or need further assistance, please contact the Customer Service Centre: csciec.ch. IEC 62629-22-1 Edition 2.0 2016-10 INTERNATIONAL STANDARD 3D display devices Part 22-1: Measuring methods for autostereoscopic displays Optical INTERNATIONAL ELECTROTECHNI

11、CAL COMMISSION ICS 31.120; 31.260 ISBN 978-2-8322-3688-8 Registered trademark of the International Electrotechnical Commission Warning! Make sure that you obtained this publication from an authorized distributor. 2 IEC 62629-22-1:2016 IEC 2016 CONTENTS FOREWORD . 5 1 Scope 7 2 Normative references 7

12、 3 Terms, definitions and abbreviated terms 7 3.1 Terms and definitions 7 3.2 Abbreviated terms . 7 4 Standard measuring conditions 8 4.1 Standard environmental conditions . 8 4.1.1 Temperature, humidity and pressure conditions . 8 4.1.2 Illumination conditions . 8 4.2 Light measuring device . 8 4.2

13、.1 General . 8 4.2.2 Aperture size . 9 4.3 Measuring setup . 9 4.3.1 Designed viewing distance 9 4.3.2 Measurement area . 10 4.3.3 Measuring layout . 10 4.4 Test signal 12 4.5 Standard measuring points . 13 5 Measuring method for two-view and multi-view displays 14 5.1 Maximum luminance direction .

14、14 5.1.1 General . 14 5.1.2 Measuring equipment 14 5.1.3 Measuring conditions . 15 5.1.4 Measuring procedure . 15 5.1.5 Measurement report 15 5.2 Lobe angle and lobe angle variation on screen . 16 5.2.1 General . 16 5.2.2 Measuring equipment 16 5.2.3 Measuring conditions . 16 5.2.4 Measuring procedu

15、re . 17 5.2.5 Measurement report 17 5.3 Luminance, screen luminance uniformity, and angular luminance variation . 18 5.3.1 Luminance and screen luminance uniformity 18 5.3.2 Angular luminance variation . 19 5.4 White chromaticity, white chromaticity uniformity on screen, and white chromaticity varia

16、tion in angle . 20 5.4.1 White chromaticity and white chromaticity uniformity on screen . 20 5.4.2 White chromaticity angular variation 22 6 Standard measuring method for integral imaging displays (1D/2D) 23 6.1 General . 23 6.2 Lobe angle and lobe angle variation on screen . 24 6.3 Luminance, scree

17、n luminance uniformity, and angular luminance variation . 24 6.3.1 Luminance and screen luminance uniformity 24 6.3.2 Angular luminance variation . 24 IEC 62629-22-1:2016 IEC 2016 3 6.4 White chromaticity, white chromaticity uniformity on screen, and white chromaticity variation in angle . 24 6.4.1

18、White chromaticity and white chromaticity uniformity on screen . 24 6.4.2 White chromaticity variation in angle 24 7 Measuring method for 3D crosstalk related property 24 7.1 3D crosstalk (luminance components ratio), 3D crosstalk variation on screen, and 3D crosstalk variation in angle for two-view

19、 and multi-view displays . 24 7.1.1 3D crosstalk (luminance components ratio) and 3D crosstalk variation on screen 24 7.1.2 3D crosstalk angular variation 27 7.2 3D crosstalk related property for multi-view display . 28 7.2.1 General . 28 7.2.2 Offset crosstalk . 28 7.2.3 3D pixel crosstalk 30 Annex

20、 A (informative) Principle of autostereoscopic display . 35 A.1 General . 35 A.2 Two-view display 35 A.3 Multi-view display . 36 A.4 Integral imaging display 37 Annex B (informative) Angular profile of luminance 39 Annex C (informative) 3D crosstalk based on one inter-pupil distance . 40 C.1 General

21、 . 40 C.2 Measuring equipment 41 C.3 Measuring conditions 41 C.4 Measuring procedure 41 C.5 Measuring report . 41 Annex D (informative) View density for motion parallax smoothness 44 D.1 General . 44 D.2 Measuring equipment 44 D.3 Measuring conditions 44 D.4 Measuring procedure 44 D.5 Measuring repo

22、rt . 44 Bibliography 46 Figure 1 Measuring system 9 Figure 2 Measuring layout for centre point measurement . 10 Figure 3 Measuring layout for multi-point measurement (side view) 11 Figure 4 Other measuring layout for multi-point measurement (side view) 11 Figure 5 Measuring layout for horizontal vie

23、wing direction dependency 12 Figure 6 Measuring layout for vertical viewing direction dependency 12 Figure 7 Two examples of the relation between pixel and lenslet in multi-view display . 13 Figure 8 Measuring points for the centre and multi-point measurement 14 Figure 9 Example of n by m measuring

24、points 14 Figure 10 Example of measurement results for angular luminance profile 16 Figure 11 Example of lobe angle measurement 17 Figure 12 Example of 3D crosstalk variation on screen 25 Figure 13 Example of acquired images in multi-view display 25 4 IEC 62629-22-1:2016 IEC 2016 Figure 14 Spatial l

25、uminance data acquisition (left) and example of calculated spatial crosstalk graph (right) . 26 Figure 15 Example of minimum luminance and maximum luminance for offset crosstalk . 29 Figure 16 Example of adjacent overlap 30 Figure 17 Example of slanted lens configuration where 4,688 sub-pixels in a

26、row are covered in one lens pitch 31 Figure 18 Measuring layout example for 3D pixel crosstalk for multi-view displays having dozens of perspective output images . 32 Figure 19 Example of luminance angular profile for a multi-view display having 28 views (perspective images) . 33 Figure A.1 Structur

27、e of two-view display 35 Figure A.2 Basic principle of two-view display 36 Figure A.3 Structure of multi-view display 36 Figure A.4 Basic principle of multi-view display 37 Figure A.5 Basic principle of integral imaging display . 37 Figure B.1 Example of angular profile of luminance 39 Figure C.1 Ex

28、ample image of a traditional multi-view display . 40 Figure C.2 Example image of the multi-view display having at least one view within one IPD 40 Figure C.3 Example of luminance angular profile for a multi-view display having at least one view within one IPD (at designed viewing distance = 3,878 m)

29、 . 42 Table 1 Example of reported specification of two-dimensional LMD . 9 Table 2 Example of measurement results for maximum luminance direction . 16 Table 3 Example of measurement results for lobe angle variation on screen 18 Table 4 Example of measurement results for luminance and screen luminanc

30、e non- uniformity 19 Table 5 Example of measurement results for angular luminance variation 20 Table 6 Example of measurement results for white chromaticity and white chromaticity uniformity on screen 22 Table 7 Example of measurement results for white chromaticity variation in angle . 23 Table 8 Ex

31、ample of measurement results for 3D crosstalk variation on screen . 27 Table 9 Example of measurement results for 3D crosstalk angular variation 28 Table 10 Example of measurement results for offset crosstalk . 30 Table 11 Example of 3D pixel crosstalk calculation results . 34 Table B.1 Example of m

32、easurement results . 39 Table C.1 Example of measurement results for 3D crosstalk based on one IPD . 43 Table D.1 Example of measurement results for motion parallax smoothness 45 IEC 62629-22-1:2016 IEC 2016 5 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ 3D DISPLAY DEVICES Part 22-1: Measuring method

33、s for autostereoscopic displays Optical FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all que

34、stions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publicatio

35、n(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non- governmental organizations liaising with the IEC also participate in this preparation. IEC co

36、llaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinio

37、n on the relevant subjects since each technical committee has representation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ens

38、ure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently t

39、o the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC itself does not provide any attestation of conformity. Independent certificati

40、on bodies provide conformity assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any services carried out by independent certification bodies. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall att

41、ach to IEC or its directors, employees, servants or agents including individual experts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fee

42、s) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable for the correct application of this publicati

43、on. 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. International Standard IEC 62629-22-1 has been prepared by IEC technical committee 110:

44、 Electronic display devices. This second edition cancels and replaces the first edition published in 2013. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: a) addition of offset crosstalk and 3D pix

45、el crosstalk as 3D crosstalk related property. 6 IEC 62629-22-1:2016 IEC 2016 The text of this standard is based on the following documents: FDIS Report on voting 110/784/FDIS 110/797/RVD Full information on the voting for the approval of this standard can be found in the report on voting indicated

46、in the above table. This publication has been drafted in accordance with the ISO/IEC Directives, Part 2. A list of all the parts in the IEC 62629 series, under the general title 3D display devices, can be found on the IEC website. The committee has decided that the contents of this publication will

47、remain unchanged until the stability date indicated on the IEC website under “http:/webstore.iec.ch“ in the data related to the specific publication. At this date, the publication will be reconfirmed, withdrawn, replaced by a revised edition, or amended. A bilingual version of this publication may b

48、e issued at a later date. IEC 62629-22-1:2016 IEC 2016 7 3D DISPLAY DEVICES Part 22-1: Measuring methods for autostereoscopic displays Optical 1 Scope This part of IEC 62629-22 specifies optical measuring methods for autostereoscopic display devices. It defines general measuring procedures for optic

49、al characteristics of two-view and multi-view displays and integral imaging displays. 2 Normative references The following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. IEC 62629-1-2, 3D