IEC 62629-1-2-2013 3D display devices - Part 1-2 Generic - Terminology and letter symbols《三维显示设备 第1-2部分 通用类 术语和文字符号》.pdf

《IEC 62629-1-2-2013 3D display devices - Part 1-2 Generic - Terminology and letter symbols《三维显示设备 第1-2部分 通用类 术语和文字符号》.pdf》由会员分享，可在线阅读，更多相关《IEC 62629-1-2-2013 3D display devices - Part 1-2 Generic - Terminology and letter symbols《三维显示设备 第1-2部分 通用类 术语和文字符号》.pdf（36页珍藏版）》请在麦多课文档分享上搜索。

1、 IEC 62629-1-2 Edition 1.0 2013-06 INTERNATIONAL STANDARD NORME INTERNATIONALE 3D display devices Part 1-2: Generic Terminology and letter symbols Dispositifs daffichage 3D Partie 1-2: Gnralits Terminologie et symboles littraux IEC 62629-1-2:2013 colour inside THIS PUBLICATION IS COPYRIGHT PROTECTED

2、 Copyright 2013 IEC, Geneva, Switzerland All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either IEC or IECs membe

3、r National Committee in the country of the requester. If you have any questions about IEC copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or your local IEC member National Committee for further information. Droits de reproduction r

4、servs. Sauf indication contraire, aucune partie de cette publication ne peut tre reproduite ni utilise sous quelque forme que ce soit et par aucun procd, lectronique ou mcanique, y compris la photocopie et les microfilms, sans laccord crit de la CEI ou du Comit national de la CEI du pays du demandeu

5、r. Si vous avez des questions sur le copyright de la CEI ou si vous dsirez obtenir des droits supplmentaires sur cette publication, utilisez les coordonnes ci-aprs ou contactez le Comit national de la CEI de votre pays de rsidence. IEC Central Office Tel.: +41 22 919 02 11 3, rue de Varemb Fax: +41

6、22 919 03 00 CH-1211 Geneva 20 infoiec.ch Switzerland www.iec.ch About the IEC The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes International Standards for all electrical, electronic and related technologies. About IEC publications Th

7、e technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the latest edition, a corrigenda or an amendment might have been published. Useful links: IEC publications search - www.iec.ch/searchpub The advanced search enables you to find IEC public

8、ations by a variety of criteria (reference number, text, technical committee,). It also gives information on projects, replaced and withdrawn publications. IEC Just Published - webstore.iec.ch/justpublished Stay up to date on all new IEC publications. Just Published details all new publications rele

9、ased. Available on-line and also once a month by email. Electropedia - www.electropedia.org The worlds leading online dictionary of electronic and electrical terms containing more than 30 000 terms and definitions in English and French, with equivalent terms in additional languages. Also known as th

10、e International Electrotechnical Vocabulary (IEV) on-line. Customer Service Centre - webstore.iec.ch/csc If you wish to give us your feedback on this publication or need further assistance, please contact the Customer Service Centre: csciec.ch. A propos de la CEI La Commission Electrotechnique Inter

11、nationale (CEI) est la premire organisation mondiale qui labore et publie des Normes internationales pour tout ce qui a trait llectricit, llectronique et aux technologies apparentes. A propos des publications CEI Le contenu technique des publications de la CEI est constamment revu. Veuillez vous ass

12、urer que vous possdez ldition la plus rcente, un corrigendum ou amendement peut avoir t publi. Liens utiles: Recherche de publications CEI - www.iec.ch/searchpub La recherche avance vous permet de trouver des publications CEI en utilisant diffrents critres (numro de rfrence, texte, comit dtudes,). E

13、lle donne aussi des informations sur les projets et les publications remplaces ou retires. Just Published CEI - webstore.iec.ch/justpublished Restez inform sur les nouvelles publications de la CEI. Just Published dtaille les nouvelles publications parues. Disponible en ligne et aussi une fois par mo

14、is par email. Electropedia - www.electropedia.org Le premier dictionnaire en ligne au monde de termes lectroniques et lectriques. Il contient plus de 30 000 termes et dfinitions en anglais et en franais, ainsi que les termes quivalents dans les langues additionnelles. Egalement appel Vocabulaire Ele

15、ctrotechnique International (VEI) en ligne. Service Clients - webstore.iec.ch/csc Si vous dsirez nous donner des commentaires sur cette publication ou si vous avez des questions contactez-nous: csciec.ch. IEC 62629-1-2 Edition 1.0 2013-06 INTERNATIONAL STANDARD NORME INTERNATIONALE 3D display device

16、s Part 1-2: Generic Terminology and letter symbols Dispositifs daffichage 3D Partie 1-2: Gnralits Terminologie et symboles littraux INTERNATIONAL ELECTROTECHNICAL COMMISSION COMMISSION ELECTROTECHNIQUE INTERNATIONALE P ICS 31.120; 31.260 PRICE CODE CODE PRIX ISBN 978-2-83220-914-1 Registered tradema

17、rk of the International Electrotechnical Commission Marque dpose de la Commission Electrotechnique Internationale Warning! Make sure that you obtained this publication from an authorized distributor. Attention! Veuillez vous assurer que vous avez obtenu cette publication via un distributeur agr. col

18、our inside 2 62629-1-2 IEC:2013 CONTENTS FOREWORD . 3 1 Scope . 5 2 Terms and definitions . 5 2.1 General terms . 5 2.2 Terms related to components 6 2.3 Terms related to performance specifications 7 Annex A (informative) Definition guideline for terms which include “image”, “view” or “vision” . 9 A

19、nnex B (informative) Classification of 3D display types 12 Annex C (informative) Relation between depth perception and 3D display . 14 Annex D (informative) Lobe . 15 Bibliography 16 Figure A.1 Difference between “image” and “view” . 9 Figure A.2 Structure of multi-view display 10 Figure A.3 Stereos

20、copic images and stereoscopic views 11 Figure B.1 Classification of 3D display . 13 Figure C.1 Depth perception and 3D display 14 Figure D.1 Lobe of autostereoscopic display 15 62629-1-2 IEC:2013 3 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ 3D DISPLAY DEVICES Part 1-2: Generic Terminology and lette

21、r symbols FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardizat

22、ion in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is e

23、ntrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non- governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the In

24、ternational Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects sin

25、ce each technical committee has representation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content

26、 of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible

27、in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity a

28、ssessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any services carried out by independent certification bodies. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, e

29、mployees, servants or agents including individual experts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of

30、 the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attention is drawn to t

31、he possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. International Standard IEC 62629-1-2 has been prepared by IEC technical committee 110: Electronic display devices. Th

32、e text of this standard is based on the following documents: FDIS Report on voting 110/470/FDIS 110/479/RVD Full information on the voting for the approval of this standard can be found in the report on voting indicated in the above table. This publication has been drafted in accordance with the ISO

33、/IEC Directives, Part 2. A list of all the parts in the IEC 62629 series, under the general title 3D display devices, can be found on the IEC website. 4 62629-1-2 IEC:2013 The committee has decided that the contents of this publication will remain unchanged until the stability date indicated on the

34、IEC web site under “http:/webstore.iec.ch“ in the data related to the specific publication. At this date, the publication will be reconfirmed, withdrawn, replaced by a revised edition, or amended. IMPORTANT The colour inside logo on the cover page of this publication indicates that it contains colou

35、rs which are considered to be useful for the correct understanding of its contents. Users should therefore print this document using a colour printer. 62629-1-2 IEC:2013 5 3D DISPLAY DEVICES Part 1-2: Generic Terminology and letter symbols 1 Scope This part of IEC 62629 provides a list of the termin

36、ologies that are frequently used in describing 3D display technologies in the IEC 62629 series. Terms for various 3D display technologies on stereoscopic, autostereoscopic, volumetric, and holographic displays are included. 2 Terms and definitions For the purposes of this document, the following ter

37、ms and definitions apply. 2.1 General terms 2.1.1 3D display display device giving depth perception with physiological depth cues Note 1 to entry: Physiological depth cues include accommodation, convergence, binocular parallax, and motion parallax. The 3D display provides users with all or some of t

38、he physiological depth cues so that they can perceive depth. Physiological depth cues should be distinguished from pictorial depth cues which can also be provided by the usual 2D displays. Pictorial depth cues are features in an image that give a hint of the depth. Examples of pictorial depth cues a

39、re texture gradient, shadow, occlusion, and vanishing lines. 2.1.2 stereoscopic display 3D display providing binocular parallax Note 1 to entry: See “autostereoscopic display”. For classification of the 3D displays, see Annex B. 2.1.3 autostereoscopic display stereoscopic display that requires no vi

40、ewing aids Note 1 to entry: See “stereoscopic display”. For classification of the 3D displays, see Annex B. 2.1.4 two-view display two-view autostereoscopic display autostereoscopic display providing one stereoscopic view Note 1 to entry: See “multi-view display”. 2.1.5 multi-view display multi-view

41、 autostereoscopic display autostereoscopic display providing multiple stereoscopic views Note 1 to entry: See “two-view display”. 6 62629-1-2 IEC:2013 2.1.6 integral imaging display integral imaging autostereoscopic display autostereoscopic display that reproduces ray space 2.1.7 volumetric display

42、autostereoscopic display which forms a set of pixels distributed in space 2.1.8 stereoscopic image pair of images with parallax shown on a stereoscopic display Note 1 to entry: Stereoscopic images are made by capturing images of an object from slightly different positions and they are used as output

43、 of a stereoscopic display. See Annex A. 2.1.9 stereoscopic view pair of sights provided by a stereoscopic display, which induce stereopsis Note 1 to entry: Stereoscopic view is generally not the same as stereoscopic image. In some cases more than a single monocular image is projected on the retina

44、of an eye. See Annex A. 2.1.10 monocular image one part of a stereoscopic image Note 1 to entry: See A.2.2. 2.1.11 monocular view one part of a stereoscopic view Note 1 to entry: See A.2.2. 2.1.12 designed viewing distance viewing distance recommended by the manufacturer of the 3D display Note 1 to

45、entry: For a detailed measurement procedure, see IEC 62629-22-1. 2.1.13 lobe space wherein one or multiple stereoscopic images are projected in correct angular order by an autostereoscopic display Note 1 to entry: See Annex D. 2.1.14 ray space spatial and angular distribution of light reflected from

46、 the surface of an object 2.2 Terms related to components 2.2.1 active glasses glasses whose left and right lenses alternate their optical characteristics, synchronizing with displayed sequential images on a stereoscopic display (e.g. synchronizing with TV fields, TV frame, etc.) to separate the dis

47、played images into left and right monocular views 62629-1-2 IEC:2013 7 Note 1 to entry: Usually left and right images are displayed alternately on a screen. When a left image is displayed, the left lens of the active glasses is turned on to transmit the image and the right lens is turned off to cut

48、off the image. The lenses do not need a function for focusing light. 2.2.2 passive glasses glasses whose left and right lenses have complementary but fixed optical characteristics to separate displayed images on a stereoscopic display into left and right monocular views Note 1 to entry: Usually spat

49、ially divided left and right images are displayed at the same time on a screen; each divided segment in the screen emits polarized light to display the images and the left and right segments have orthogonal polarization. The left lens of the passive glasses has a polarization to pass the emitted light of the left images and to cut off that of the right images, while the right lens passes the right images and cuts o