IEC 62386-201-2015 Digital addressable lighting interface - Part 201 Particular requirements for control gear - Fluorescent lamps (device type 0)《数字可寻址照明接口.第201部分 控制装置的特殊要求.荧光灯(装置型号 0)》.pdf

《IEC 62386-201-2015 Digital addressable lighting interface - Part 201 Particular requirements for control gear - Fluorescent lamps (device type 0)《数字可寻址照明接口.第201部分 控制装置的特殊要求.荧光灯(装置型号 0)》.pdf》由会员分享，可在线阅读，更多相关《IEC 62386-201-2015 Digital addressable lighting interface - Part 201 Particular requirements for control gear - Fluorescent lamps (device type 0)《数字可寻址照明接口.第201部分 控制装置的特殊要求.荧光灯(装置型号 0)》.pdf（14页珍藏版）》请在麦多课文档分享上搜索。

1、 IEC 62386-201 Edition 2.0 2015-05 INTERNATIONAL STANDARD Digital addressable lighting interface Part 201: Particular requirements for control gear Fluorescent lamps (device type 0) IEC 62386-201:2015-05(en) colour inside THIS PUBLICATION IS COPYRIGHT PROTECTED Copyright 2015 IEC, Geneva, Switzerlan

2、d All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either IEC or IECs member National Committee in the country of

3、the requester. If you have any questions about IEC copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or your local IEC member National Committee for further information. IEC Central Office Tel.: +41 22 919 02 11 3, rue de Varemb Fax:

4、 +41 22 919 03 00 CH-1211 Geneva 20 infoiec.ch Switzerland www.iec.ch About the IEC The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes International Standards for all electrical, electronic and related technologies. About IEC publicatio

5、ns The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the latest edition, a corrigenda or an amendment might have been published. IEC Catalogue - webstore.iec.ch/catalogue The stand-alone application for consulting the entire bibliograp

6、hical information on IEC International Standards, Technical Specifications, Technical Reports and other documents. Available for PC, Mac OS, Android Tablets and iPad. IEC publications search - www.iec.ch/searchpub The advanced search enables to find IEC publications by a variety of criteria (referen

7、ce number, text, technical committee,). It also gives information on projects, replaced and withdrawn publications. IEC Just Published - webstore.iec.ch/justpublished Stay up to date on all new IEC publications. Just Published details all new publications released. Available online and also once a m

8、onth by email. Electropedia - www.electropedia.org The worlds leading online dictionary of electronic and electrical terms containing more than 30 000 terms and definitions in English and French, with equivalent terms in 15 additional languages. Also known as the International Electrotechnical Vocab

9、ulary (IEV) online. IEC Glossary - std.iec.ch/glossary More than 60 000 electrotechnical terminology entries in English and French extracted from the Terms and Definitions clause of IEC publications issued since 2002. Some entries have been collected from earlier publications of IEC TC 37, 77, 86 an

10、d CISPR. IEC Customer Service Centre - webstore.iec.ch/csc If you wish to give us your feedback on this publication or need further assistance, please contact the Customer Service Centre: csciec.ch. IEC 62386-201 Edition 2.0 2015-05 INTERNATIONAL STANDARD Digital addressable lighting interface Part

11、201: Particular requirements for control gear Fluorescent lamps (device type 0) INTERNATIONAL ELECTROTECHNICAL COMMISSION ICS 29.140.50, 29.140.99 ISBN 978-2-8322-2690-2 Registered trademark of the International Electrotechnical Commission Warning! Make sure that you obtained this publication from a

12、n authorized distributor. colour inside 2 IEC 62386-201:2015 IEC 2015 CONTENTS FOREWORD . 3 INTRODUCTION . 5 1 Scope 6 2 Normative references 6 3 Terms and definitions 6 4 General . 6 5 Electrical specification . 7 6 Interface power supply 7 7 Transmission protocol structure . 7 8 Timing . 7 9 Metho

13、d of operation . 7 10 Declaration of variables . 7 11 Definition of commands . 8 12 Test procedures 8 Figure 1 IEC 62386 graphical overview 5 Table 1 Declaration of additional variables . 8 IEC 62386-201:2015 IEC 2015 3 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ DIGITAL ADDRESSABLE LIGHTING INTERFA

14、CE Part 201: Particular requirements for control gear Fluorescent lamps (device type 0) FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is

15、to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and

16、Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non- governmental organizations liaising with the

17、IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly a

18、s possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sen

19、se. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees und

20、ertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC itself does not provide any at

21、testation of conformity. Independent certification bodies provide conformity assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any services carried out by independent certification bodies. 6) All users should ensure that they have the latest editio

22、n of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direc

23、t or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensab

24、le for the correct application of this publication. 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. International Standard IEC 62386-201 ha

25、s been prepared by subcommittee 34C: Auxiliaries for lamps, of IEC technical committee 34: Lamps and related equipment. This second edition cancels and replaces the first edition published in 2009 and constitutes a technical revision. The essential changes with respect to the first edition are: refe

26、rences to subclauses in IEC 62386-101 and IEC 62386-102 updated to the new structure of the standard; test sequence reworked and description of the test sequences in form of a pseudo code instead of flow charts. 4 IEC 62386-201:2015 IEC 2015 The text of this standard is based on the following docume

27、nts: CDV Report on voting 34C/1082/CDV 34C/1103/RVC Full information on the voting for the approval of this standard can be found in the report on voting indicated in the above table. This Part 201 of IEC 62386 is intended to be used in conjunction with: IEC 62386-101, which contains general require

28、ments for system components; IEC 62386-102, which contains general requirements for the control gear. This publication has been drafted in accordance with the ISO/IEC Directives, Part 2. The committee has decided that the contents of this publication will remain unchanged until the stability date in

29、dicated on the IEC website under “http:/webstore.iec.ch“ in the data related to the specific publication. At this date, the publication will be reconfirmed, withdrawn, replaced by a revised edition, or amended. A bilingual version of this publication may be issued at a later date. IMPORTANT The colo

30、ur inside logo on the cover page of this publication indicates that it contains colours which are considered to be useful for the correct understanding of its contents. Users should therefore print this document using a colour printer. IEC 62386-201:2015 IEC 2015 5 INTRODUCTION IEC 62386 contains se

31、veral parts, referred to as series. The 1xx series includes the basic specifications. Part 101 contains general requirements for system components, Part 102 extends this information with general requirements for control gear and Part 103 extends it further with general requirements for control devic

32、es. The 2xx parts extend the general requirements for control gear with lamp specific extensions (mainly for backward compatibility with Edition 1 of IEC 62386) and with control gear specific features. The 3xx parts extend the general requirements for control devices with input device specific exten

33、sions describing the instance types as well as some common features that can be combined with multiple instance types. The setup of the standard is graphically represented in Figure 1 below. Figure 1 IEC 62386 graphical overview This second edition of IEC 62386-201 is published in conjunction with t

34、he second edition of IEC 62386-101 and the second edition of IEC 62386-102. The division of IEC 62386 into separately published parts provides for ease of future amendments and revisions. Additional requirements will be added as and when a need for them is recognized. This International Standard, an

35、d the other parts that make up the IEC 62386-200 series, in referring to any of the clauses of IEC 62386-101 or IEC 62386-102, specify the extent to which such a clause is applicable and the order in which the tests are to be performed; the parts also include additional requirements, as necessary. W

36、here the requirements of any of the clauses of IEC 62386-101 or IEC 62386-102 are referred to in this International Standard by the sentence “The requirements of fluorescent lamp control gear (device type 0) shall conform to IEC 62386-1xx, Clause “n”, this sentence is to be interpreted as meaning th

37、at all requirements of the clause in question of Part 101 or Part 102 apply, except any which are inapplicable to the specific type of lamp control gear covered by Part 201. All numbers used in this International Standard are decimal numbers unless otherwise noted. Hexadecimal numbers are given in t

38、he format 0xVV, where VV is the value. Binary numbers are given in the format XXXXXXXXb or in the format XXXX XXXX, where X is 0 or 1; “x“ in binary numbers means “dont care“. IEC 101 General requirements System components 103 General requirements Control devices 102 General requirements Control gea

39、r 2xx 2xx 2xx 2xx 2xx 3xx 3xx 3xx 3xx 3xx 6 IEC 62386-201:2015 IEC 2015 DIGITAL ADDRESSABLE LIGHTING INTERFACE Part 201: Particular requirements for control gear Fluorescent lamps (device type 0) 1 Scope This part of IEC 62386 specifies a bus system for control by digital signals of electronic light

40、ing equipment. This electronic lighting equipment should be in line with the requirements of IEC 61347. This document is applicable to control gear associated with fluorescent lamps. NOTE Tests in this standard are type tests. Requirements for testing individual bus units during production are not i

41、ncluded. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including

42、any amendments) applies. IEC 61347 (all parts), Lamp controlgear IEC 62386-101:2014, Digital addressable lighting interface Part 101: General requirements System components IEC 62386-102:2014, Digital addressable lighting interface Part 102: General requirements Control gear 3 Terms and definitions

43、For the purposes of this document, the terms and definitions given in Clause 3 of IEC 62386-101:2014 and Clause 3 of IEC 62386-102:2014 apply. 4 General The requirements of IEC 62386-102:2014, Clause 4 apply, with the following exception: Replace Subclause 4.2 by the following: 4.2 Extended version

44、number The extended version number of this document shall be in the format “x.y“, where the major extended version number x is in the range of 0 to 62 and the minor extended version number y is in the range of 0 to 2. When the extended version number is encoded into a byte, the major extended versio

45、n number x shall be placed in bits 7 to 2 and the minor extended version number y shall be placed in bits 1 to 0. At each amendment to an edition of IEC 62386-201, the minor extended version number shall be incremented by one. IEC 62386-201:2015 IEC 2015 7 At a new edition of IEC 62386-201, the majo

46、r extended version number shall be incremented by one and the minor extended version number shall be set to 0. The current extended version number is “2.0“ and is encoded in extendedVersionNumber. NOTE IEC allows normally for 2 amendments before a new edition is created. 5 Electrical specification T

47、he requirements of IEC 62386-101:2014, Clause 5 apply. 6 Interface power supply If a power supply is integrated into a control gear, the requirements of IEC 62386-101:2014, Clause 6 apply. 7 Transmission protocol structure 7.1 General The requirements of Subclause 7.1 of IEC 62386-101:2014 apply. 7.

48、2 Bit encoding The requirements of Subclause 7.2 of IEC 62386-101:2014 apply. 7.3 Frame description The requirements of Subclause 7.3 of IEC 62386-101:2014 apply. 7.4 Frame types The requirements of Subclause 7.4 of IEC 62386-101:2014 apply. 7.5 16 bit forward frame encoding The requirements of Subc

49、lause 7.2 of IEC 62386-102:2014 apply. 8 Timing The requirements of IEC 62386-101:2014, Clause 8 apply. 9 Method of operation The requirements of IEC 62386-102:2014, Clause 9 apply. 10 Declaration of variables The requirements of IEC 62386-102:2014, Clause 10 apply, with the following additional variables for this device type, as indicated in Table 1. 8 IEC 62386-201:2015 IEC 2015 Table 1 Declaration of additional variables Variable Default value (factory) Reset value