IEC 62264-2-2013 Enterprise-control system integration - Part 2 Objects and attributes for enterprise-control system integration《企业控制系统集成 第2部分 企业控制系统集成对象和属性》.pdf

《IEC 62264-2-2013 Enterprise-control system integration - Part 2 Objects and attributes for enterprise-control system integration《企业控制系统集成 第2部分 企业控制系统集成对象和属性》.pdf》由会员分享，可在线阅读，更多相关《IEC 62264-2-2013 Enterprise-control system integration - Part 2 Objects and attributes for enterprise-control system integration《企业控制系统集成 第2部分 企业控制系统集成对象和属性》.pdf（362页珍藏版）》请在麦多课文档分享上搜索。

1、 IEC 62264-2 Edition 2.0 2013-06 INTERNATIONAL STANDARD NORME INTERNATIONALE Enterprise-control system integration Part 2: Objects and attributes for enterprise-control system integration Intgration des systmes entreprise-contrle Partie 2: Objets et attributs pour lintgration des systmes de commande

2、 dentreprise IEC 62264-2:2013 colour inside THIS PUBLICATION IS COPYRIGHT PROTECTED Copyright 2013 IEC, Geneva, Switzerland All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including phot

3、ocopying and microfilm, without permission in writing from either IEC or IECs member National Committee in the country of the requester. If you have any questions about IEC copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or your lo

4、cal IEC member National Committee for further information. Droits de reproduction rservs. Sauf indication contraire, aucune partie de cette publication ne peut tre reproduite ni utilise sous quelque forme que ce soit et par aucun procd, lectronique ou mcanique, y compris la photocopie et les microfi

5、lms, sans laccord crit de la CEI ou du Comit national de la CEI du pays du demandeur. Si vous avez des questions sur le copyright de la CEI ou si vous dsirez obtenir des droits supplmentaires sur cette publication, utilisez les coordonnes ci-aprs ou contactez le Comit national de la CEI de votre pay

6、s de rsidence. IEC Central Office Tel.: +41 22 919 02 11 3, rue de Varemb Fax: +41 22 919 03 00 CH-1211 Geneva 20 infoiec.ch Switzerland www.iec.ch About the IEC The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes International Standards

7、 for all electrical, electronic and related technologies. About IEC publications The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the latest edition, a corrigenda or an amendment might have been published. Useful links: IEC publicatio

8、ns search - www.iec.ch/searchpub The advanced search enables you to find IEC publications by a variety of criteria (reference number, text, technical committee,). It also gives information on projects, replaced and withdrawn publications. IEC Just Published - webstore.iec.ch/justpublished Stay up to

9、 date on all new IEC publications. Just Published details all new publications released. Available on-line and also once a month by email. Electropedia - www.electropedia.org The worlds leading online dictionary of electronic and electrical terms containing more than 30 000 terms and definitions in

10、English and French, with equivalent terms in additional languages. Also known as the International Electrotechnical Vocabulary (IEV) on-line. Customer Service Centre - webstore.iec.ch/csc If you wish to give us your feedback on this publication or need further assistance, please contact the Customer

11、 Service Centre: csciec.ch. A propos de la CEI La Commission Electrotechnique Internationale (CEI) est la premire organisation mondiale qui labore et publie des Normes internationales pour tout ce qui a trait llectricit, llectronique et aux technologies apparentes. A propos des publications CEI Le c

12、ontenu technique des publications de la CEI est constamment revu. Veuillez vous assurer que vous possdez ldition la plus rcente, un corrigendum ou amendement peut avoir t publi. Liens utiles: Recherche de publications CEI - www.iec.ch/searchpub La recherche avance vous permet de trouver des publicat

13、ions CEI en utilisant diffrents critres (numro de rfrence, texte, comit dtudes,). Elle donne aussi des informations sur les projets et les publications remplaces ou retires. Just Published CEI - webstore.iec.ch/justpublished Restez inform sur les nouvelles publications de la CEI. Just Published dtai

14、lle les nouvelles publications parues. Disponible en ligne et aussi une fois par mois par email. Electropedia - www.electropedia.org Le premier dictionnaire en ligne au monde de termes lectroniques et lectriques. Il contient plus de 30 000 termes et dfinitions en anglais et en franais, ainsi que les

15、 termes quivalents dans les langues additionnelles. Egalement appel Vocabulaire Electrotechnique International (VEI) en ligne. Service Clients - webstore.iec.ch/csc Si vous dsirez nous donner des commentaires sur cette publication ou si vous avez des questions contactez-nous: csciec.ch. IEC 62264-2

16、Edition 2.0 2013-06 INTERNATIONAL STANDARD NORME INTERNATIONALE Enterprise-control system integration Part 2: Objects and attributes for enterprise-control system integration Intgration des systmes entreprise-contrle Partie 2: Objets et attributs pour lintgration des systmes de commande dentreprise

17、INTERNATIONAL ELECTROTECHNICAL COMMISSION COMMISSION ELECTROTECHNIQUE INTERNATIONALE XH ICS 25.040.40; 35.240.50 PRICE CODE CODE PRIX ISBN 978-2-83220-833-5 Warning! Make sure that you obtained this publication from an authorized distributor. Attention! Veuillez vous assurer que vous avez obtenu cet

18、te publication via un distributeur agr. colour inside 2 62264-2 IEC:2013 CONTENTS FOREWORD . 9 INTRODUCTION . 11 1 Scope . 12 2 Normative references . 12 3 Terms, definitions and abbreviations 12 3.1 Terms and definitions 12 3.2 Abbreviations 13 4 Production operations models and generic operations

19、models 13 4.1 Information models 13 4.2 General modeling information 15 4.3 Extensibility of attributes through properties 15 4.4 Object model structure 16 4.5 Explanation of tables . 16 4.5.1 Tables of attributes 16 4.5.2 Object identification . 16 4.5.3 Data types . 17 4.5.4 Presentation of exampl

20、es 17 4.5.5 References to resources 18 4.5.6 Object relationships . 19 4.6 Relationship of models 19 4.7 Hierarchy scope 20 4.8 Value types . 20 4.8.1 Value use 20 4.8.2 Value syntax 21 4.8.3 Simple value types 21 4.8.4 Unit of measure . 22 4.8.5 Array value types . 22 4.8.6 Range value types . 22 4

21、.8.7 Series value types . 22 4.8.8 Structured value types . 22 5 Common object models 23 5.1 Personnel information . 23 5.1.1 Personnel model 23 5.1.2 Personnel class . 24 5.1.3 Personnel class property . 24 5.1.4 Person . 25 5.1.5 Person property . 26 5.1.6 Qualification test specification . 27 5.1

22、.7 Qualification test result 28 5.2 Role based equipment information 29 5.2.1 Role based equipment model. 29 5.2.2 Equipment class 30 5.2.3 Equipment class property 31 5.2.4 Equipment . 32 5.2.5 Equipment property . 32 5.2.6 Equipment capability test specification 33 62264-2 IEC:2013 3 5.2.7 Equipme

23、nt capability test result . 34 5.3 Physical asset information . 35 5.3.1 Physical asset model . 35 5.3.2 Physical asset . 36 5.3.3 Physical asset property . 37 5.3.4 Physical asset class 37 5.3.5 Physical asset class property. 38 5.3.6 Physical asset capability test specification . 38 5.3.7 Physical

24、 asset capability test result . 39 5.3.8 Equipment asset mapping 40 5.4 Material information . 40 5.4.1 Material model . 40 5.4.2 Material class 41 5.4.3 Material class property 42 5.4.4 Material definition 43 5.4.5 Material definition property 44 5.4.6 Material lot 45 5.4.7 Material lot property .

25、47 5.4.8 Material sublot . 47 5.4.9 Material test specification 49 5.4.10 Material test result . 50 5.4.11 Assemblies 51 5.5 Process segment information 52 5.5.1 Process segment model 52 5.5.2 Process segment . 53 5.5.3 Personnel segment specification . 54 5.5.4 Personnel segment specification prope

26、rty 55 5.5.5 Equipment segment specification. 56 5.5.6 Equipment segment specification property . 56 5.5.7 Material segment specification . 57 5.5.8 Material segment specification property . 59 5.5.9 Physical asset segment specification . 59 5.5.10 Physical asset segment specification property . 60

27、5.5.11 Process segment parameter 61 5.5.12 Process segment dependency . 61 5.6 Containers, tools and software 63 5.6.1 Containers . 63 5.6.2 Tools . 63 5.6.3 Software 63 6 Operations management information 63 6.1 Operations definition information . 63 6.1.1 Operations definition model . 63 6.1.2 Ope

28、rations definition . 64 6.1.3 Operations material bill 65 6.1.4 Operations material bill item 66 6.1.5 Operations segment 67 6.1.6 Parameter specification . 68 6.1.7 Personnel specification 69 4 62264-2 IEC:2013 6.1.8 Personnel specification property 70 6.1.9 Equipment specification . 71 6.1.10 Equi

29、pment specification property . 72 6.1.11 Physical asset specification . 73 6.1.12 Physical asset specification property . 74 6.1.13 Material specification . 75 6.1.14 Material specification property . 76 6.1.15 Operations segment dependency . 77 6.2 Operations schedule information . 77 6.2.1 Operati

30、ons schedule model . 77 6.2.2 Operations schedule 78 6.2.3 Operations request 80 6.2.4 Segment requirement 81 6.2.5 Segment parameter . 82 6.2.6 Personnel requirement 83 6.2.7 Personnel requirement property . 84 6.2.8 Equipment requirement 85 6.2.9 Equipment requirement property 86 6.2.10 Physical a

31、sset requirement 87 6.2.11 Physical asset requirement property 89 6.2.12 Material requirement 89 6.2.13 Material requirement property 91 6.2.14 Requested segment response . 92 6.3 Operations performance information 92 6.3.1 Operations performance model 92 6.3.2 Operations performance 93 6.3.3 Operat

32、ions response . 94 6.3.4 Segment response . 95 6.3.5 Segment data 96 6.3.6 Personnel actual 97 6.3.7 Personnel actual property 98 6.3.8 Equipment actual . 99 6.3.9 Equipment actual property . 100 6.3.10 Physical asset actual . 101 6.3.11 Physical asset actual property . 102 6.3.12 Material actual .

33、103 6.3.13 Material actual property . 105 6.4 Operations capability information 105 6.4.1 Operations capability model . 105 6.4.2 Operations capability . 106 6.4.3 Personnel capability 107 6.4.4 Personnel capability property. 109 6.4.5 Equipment capability . 109 6.4.6 Equipment capability property 1

34、10 6.4.7 Physical asset capability 111 6.4.8 Physical asset capability property 112 6.4.9 Material capability . 113 6.4.10 Material capability property 115 6.5 Process segment capability information . 116 62264-2 IEC:2013 5 6.5.1 Process segment capability model . 116 6.5.2 Process segment capabilit

35、y . 117 7 Object model inter-relationships . 118 8 List of objects . 120 9 Compliance 123 Annex A (normative) Production specific information 124 Annex B (informative) Use and examples . 132 Annex C (informative) Example data sets . 140 Annex D (informative) Questions and answers about object use 14

36、8 Annex E (informative) Logical information flows . 162 Bibliography 165 Figure 1 Production operations management information models . 14 Figure 2 Operations information models for operations management . 15 Figure 3 Detailed resource relationship in models 18 Figure 4 Hierarchy scope model . 20 Fi

37、gure 5 Personnel model 24 Figure 6 Role based equipment model . 30 Figure 7 Physical asset model . 35 Figure 8 Physical asset and equipment relationship . 36 Figure 9 Material model . 41 Figure 10 Example of a material with an assembly . 52 Figure 11 Process segment model . 53 Figure 12 Segment depe

38、ndency examples . 62 Figure 13 Operations definition model 64 Figure 14 Operations schedule model 78 Figure 15 Operations performance model 92 Figure 16 Operations capability Model . 106 Figure 17 Process segment capability object model . 116 Figure 18 Object model inter-relationships . 118 Figure A

39、.1 Product definition model . 124 Figure A.2 Production schedule model . 127 Figure A.3 Production performance model . 129 Figure A.4 Production capability model 131 Figure B.1 Personnel model . 133 Figure B.2 Instances of a person class 134 Figure B.3 UML model for class and class properties . 134

40、Figure B.4 Class property 135 Figure B.5 Instances of a person properties . 135 Figure B.6 Instances of person and person properties . 135 Figure B.7 XML schema for a person object . 138 Figure B.8 XML schema for person properties 138 Figure B.9 Example of person and person property 139 6 62264-2 IE

41、C:2013 Figure B.10 Example of person class information . 139 Figure B.11 Adaptor to map different property IDs and values 139 Figure D.1 Class and property IDs used to identify elements 151 Figure D.2 A property defining overlapping subsets of the capability 152 Figure D.3 Routing for a product 153

42、Figure D.4 Routing with co-products and material dependencies 154 Figure D.5 Product and process capability relationships 155 Figure D.6 Time-based dependencies 156 Figure D.7 Mixed operation example 160 Figure E.1 Enterprise to manufacturing system logical information flows 163 Figure E.2 Logical i

43、nformation flows among multiple systems 164 Table 1 UML notation used 16 Table 2 Example table . 17 Table 3 Attributes of hierarchy scope . 20 Table 4 Commonly used CCTS types for exchange 21 Table 5 Attributes of personnel class . 24 Table 6 Attributes of personnel class property . 25 Table 7 Attri

44、butes of person . 26 Table 8 Attributes of person property . 27 Table 9 Attributes of qualification test specification 28 Table 10 Attributes of qualification test result . 29 Table 11 Attributes of equipment class 31 Table 12 Attributes of equipment class property . 31 Table 13 Attributes of equipm

45、ent . 32 Table 14 Attributes of equipment property 33 Table 15 Attributes of equipment capability test specification . 34 Table 16 Attributes of equipment capability test result . 34 Table 17 Attributes of physical asset 36 Table 18 Attributes of physical asset property 37 Table 19 Attributes of phy

46、sical asset class . 38 Table 20 Attributes of physical asset class property . 38 Table 21 Attributes of physical asset capability test specification . 39 Table 22 Attributes of physical asset capability test result 40 Table 23 Attributes of equipment asset mapping 40 Table 24 Attributes of material

47、class 42 Table 25 Attributes of material class property 43 Table 26 Attributes of material definition 44 Table 27 Attributes of material definition property 45 Table 28 Attributes of material lot 46 Table 29 Attributes of material lot property . 47 Table 30 Attributes of material sublot . 49 Table 3

48、1 Attributes of material test specification 50 62264-2 IEC:2013 7 Table 32 Attributes of material test result . 51 Table 33 Attributes of process segment . 54 Table 34 Attributes of personnel segment specification 55 Table 35 Attributes of personnel segment specification property 56 Table 36 Attribu

49、tes of equipment segment specification . 56 Table 37 Attributes of equipment segment specification property . 57 Table 38 Attributes of material segment specification . 58 Table 39 Attributes of material segment specification property . 59 Table 40 Attributes of physical asset segment specification . 60 Table