IEC 61937-2-2007 Digital audio - Interface for non-linear PCM encoded audio bitstreams applying IEC 60958 - Part 2 Burst-info《数字音频.用于IEC 60958的非线性脉冲编码调制(PCM)编码音频位流的接口.第2部分 脉冲串信息 》.pdf

《IEC 61937-2-2007 Digital audio - Interface for non-linear PCM encoded audio bitstreams applying IEC 60958 - Part 2 Burst-info《数字音频.用于IEC 60958的非线性脉冲编码调制(PCM)编码音频位流的接口.第2部分 脉冲串信息 》.pdf》由会员分享，可在线阅读，更多相关《IEC 61937-2-2007 Digital audio - Interface for non-linear PCM encoded audio bitstreams applying IEC 60958 - Part 2 Burst-info《数字音频.用于IEC 60958的非线性脉冲编码调制(PCM)编码音频位流的接口.第2部分 脉冲串信息 》.pdf（14页珍藏版）》请在麦多课文档分享上搜索。

1、 INTERNATIONAL STANDARD IEC61937-2Second edition2007-05Digital audio Interface for non-linear PCM encoded audio bitstreams applying IEC 60958 Part 2: Burst-info Reference number IEC 61937-2:2007(E) THIS PUBLICATION IS COPYRIGHT PROTECTED Copyright 2007 IEC, Geneva, Switzerland All rights reserved. U

2、nless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either IEC or IECs member National Committee in the country of the requester. If you ha

3、ve any questions about IEC copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or your local IEC member National Committee for further information. IEC Central Office 3, rue de Varemb CH-1211 Geneva 20 Switzerland Email: inmailiec.ch W

4、eb: www.iec.ch About the IEC The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes International Standards for all electrical, electronic and related technologies. About IEC publications The technical content of IEC publications is kept un

5、der constant review by the IEC. Please make sure that you have the latest edition, a corrigenda or an amendment might have been published. Catalogue of IEC publications: www.iec.ch/searchpub The IEC on-line Catalogue enables you to search by a variety of criteria (reference number, text, technical c

6、ommittee,). It also gives information on projects, withdrawn and replaced publications. IEC Just Published: www.iec.ch/online_news/justpub Stay up to date on all new IEC publications. Just Published details twice a month all new publications released. Available on-line and also by email. Customer Se

7、rvice Centre: www.iec.ch/webstore/custserv If you wish to give us your feedback on this publication or need further assistance, please visit the Customer Service Centre FAQ or contact us: Email: csciec.ch Tel.: +41 22 919 02 11 Fax: +41 22 919 03 00 INTERNATIONAL STANDARD IEC61937-2Second edition200

8、7-05Digital audio Interface for non-linear PCM encoded audio bitstreams applying IEC 60958 Part 2: Burst-info L For price, see current cataloguePRICE CODE Commission Electrotechnique InternationaleInternational Electrotechnical Commission 2 61937-2 IEC:2007(E) CONTENTS FOREWORD.3 1 Scope.5 2 Normati

9、ve references .5 3 Terms, definitions and abbreviations 6 3.1 Terms and definitions .6 3.2 Abbreviations 7 4 Burst-info .7 4.1 General .7 4.2 Data-type and subdata-type 7 4.3 Audio data-bursts 9 4.3.1 General .9 4.3.2 AC-39 4.3.3 MPEG-1 layer-1.9 4.3.4 MPEG-1 layer-2 or -3 or MPEG-2 without extensio

10、n 9 4.3.5 MPEG-2 with extension .9 4.3.6 MPEG-2 AAC 9 4.3.7 MPEG-2 layer-1 low sampling frequency .9 4.3.8 MPEG-2 layer-2 low sampling frequency .10 4.3.9 MPEG-2 layer-3 low sampling frequency .10 4.3.10 DTS type I .10 4.3.11 DTS type II 10 4.3.12 DTS type III .10 4.3.13 DTS type IV.10 4.3.14 ATRAC

11、10 4.3.15 ATRAC 2/3 10 4.3.16 ATRAC-X.10 4.3.17 MPEG-2 AAC low sampling frequency .10 4.3.18 MPEG-4 AAC 11 4.3.19 Windows Media Audio professional11 4.3.20 Enhanced AC-3 .11 4.3.21 MAT 11 Table 1 Fields of burst-info 7 Table 2 Data-types 8 61937-2 IEC:2007(E) 3 INTERNATIONAL ELECTROTECHNICAL COMMISS

12、ION _ DIGITAL AUDIO INTERFACE FOR NON-LINEAR PCM ENCODED AUDIO BITSTREAMS APPLYING IEC 60958 Part 2: Burst-info FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees

13、). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available S

14、pecifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non-governmental organizat

15、ions liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matte

16、rs express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National

17、 Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC

18、National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC provide

19、s no marking procedure to indicate its approval and cannot be rendered responsible for any equipment declared to be in conformity with an IEC Publication. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees

20、, servants or agents including individual experts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the pub

21、lication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attention is drawn to the possi

22、bility that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. International Standard IEC 61937-2 has been prepared by Technical Area 4, of IEC technical committee 100: Audio, video and mu

23、ltimedia systems and equipment. This second edition of IEC 61937-2 cancels and replaces the first edition published in 2000. This edition contains the following significant technical changes with respect to the previous edition. a) New audio data-types of enhanced AC-3 data, MPEG-2 AAC low sampling

24、frequency, MPEG-4 AAC, DTS type IV, ATRAC-X, WMA professional and MAT are added. b) Data-type field in Pc is expanded from bit 0-4 to 0-6. 4 61937-2 IEC:2007(E) The text of this standard is based on the following documents: CDV Report on voting 100/1115/CDV 100/1221/RVC Full information on the votin

25、g for the approval of this standard can be found in the report on voting indicated in the above table. This publication has been drafted in accordance with the ISO/IEC Directives, Part 2. The list of all the parts of the IEC 61937 series, under the general title Digital audio Interface for non-linea

26、r PCM encoded audio bitstreams applying IEC 60958, can be found on the IEC website. The committee has decided that the contents of this publication will remain unchanged until the maintenance result date indicated on the IEC web site under “http:/webstore.iec.ch“ in the data related to the specific

27、publication. At this date, the publication will be reconfirmed, withdrawn, replaced by a revised edition, or amended. A bilingual version of this publication may be issued at a later date. 61937-2 IEC:2007(E) 5 DIGITAL AUDIO INTERFACE FOR NON-LINEAR PCM ENCODED AUDIO BITSTREAMS APPLYING IEC 60958 Pa

28、rt 2: Burst-info 1 Scope This part of IEC 61970 specifies the digital audio interface to convey non-linear PCM encoded audio bitstreams applying IEC 60958-1 and IEC 60958-3. This standard specifies burst-info which defines content information about the data contained in the burst payload. 2 Normativ

29、e references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. IEC 60958-1, Digital audio interface

30、 Part 1: General IEC 60958-3, Digital audio interface Part 3: Consumer applications IEC 61937-1, Digital audio Interface for non-linear PCM encoded audio bitstreams applying IEC 60958 Part 1: General IEC 61937-3, Digital audio Interface for non-linear PCM encoded audio bitstreams applying IEC 60958

31、Part 3: Non-linear PCM bitstreams according to the AC-3 format IEC 61937-4, Digital audio Interface for non-linear PCM encoded audio bitstreams applying IEC 60958 Part 4: Non-linear PCM bitstreams according to the MPEG audio formats IEC 61937-5, Digital audio Interface for non-linear PCM encoded aud

32、io bitstreams applying IEC 60958 Part 5: Non-linear PCM bitstreams according to the DTS (Digital Theater Systems) format(s) IEC 61937-6, Digital audio Interface for non-linear PCM encoded audio bitstreams applying IEC 60958 Part 6: Non-linear PCM bitstreams according to the MPEG-2 AAC and MPEG-4 AAC

33、 formats IEC 61937-7, Digital audio Interface for non-linear PCM encoded audio bitstreams applying IEC 60958 Part 7: Non-linear PCM bitstreams according to the ATRAC, ATRAC2/3 and ATRAC-X formats IEC 61937-8, Digital audio Interface for non-linear PCM encoded audio bitstreams applying IEC 60958 Part

34、 8: Non-linear PCM bitstreams according to the Windows Media Audio (WMA) Professional format IEC 61937-9, Digital audio Interface for non-linear PCM encoded audio bitstreams applying IEC 60958 Part 9: Non-linear PCM bitstreams according to the MAT format1 1To be published. 6 61937-2 IEC:2007(E) ISO/

35、IEC 11172-3: Information technology Coding of moving pictures and associated audio for digital storage media at up to about 1,5 Mb/s Part 3: Audio ISO/IEC 13818-3, Information technology Generic coding of moving pictures and associated audio information Part 3: Audio ISO/IEC 13818-7, Information tec

36、hnology Generic coding of moving pictures and associated audio information Advanced Audio Coding (AAC) ISO/IEC 14496-3, Information technology Coding of audio-visual objects Part 3: Audio ITU-R Recommendation BS.1196, Audio coding for digital terrestrial television broadcasting 3 Terms, definitions

37、and abbreviations 3.1 Terms and definitions For the purpose of this document, the following terms and definitions apply. audio data-burst data-burst with an encoded audio frame as burst-payload audio data-word 16-bit data word audio frame fixed number of audio samples. The number of samples in an au

38、dio frame is dependent on the particular encoding system which is used to encode the audio frame into the encoded audio frame audio gap period in the sequence of baseband audio samples where valid samples of audio are not available bitstream non-linear PCM encoded audio source, represented in a sequ

39、ence of bits. In this interface the bitstream consists of a sequence of data-bursts data-burst packet of data, including the burst-preamble, to be transmitted across the interface burst-payload information content of the data-burst burst-preamble header for the data-burst, containing synchronization

40、 and information about the data contained in the burst-payload data-type reference to the type of payload of the data-bursts encoded audio frame minimum decodable unit of an encoded data sequence. Each encoded audio frame is the encoded representation of a fixed number of audio samples (for each ori

41、ginal audio channel). The number of samples which are encoded into an encoded audio frame depends on the particular encoding system which is used to encode the audio frame into the encoded audio frame length-code length of the data-burst-payload in bits repetition period period between the reference

42、 point of the current data-burst, and the reference point of the immediately following data-burst of the same data-type sampling frequency sampling frequency of the encoded PCM audio samples (i.e. before encoding and after decoding) sampling period period related to the sampling frequency of the PCM

43、 audio samples, represented in the encoded bitstream stuffing occupying the unused data capacity of the interface stuffing sub-frame occupying the unused data capacity in 16-bit audio data words stream gap period within the encoded audio bitstream without any audio frame; a discontinuity in the bits

44、tream. Typically, a stream gap will occur between encoded audio frames 61937-2 IEC:2007(E) 7 3.2 Abbreviations ATRAC Adaptive TRansform Acoustic Coding ATRAC2 Adaptive TRansform Acoustic Coding 2 ATRAC3 Adaptive TRansform Acoustic Coding 3 ATRAC2/3 ATRAC2 and/or ATRAC3 ATRAC-X Adaptive TRansform Aco

45、ustic Coding-X ATSC Advanced Television Systems Committee IEC International Electrotechnical Commission ISO/IEC MPEG Moving Pictures Expert Group, a joint committee of ISO and IEC ITU-R International Telecommunication Union, Radiocommunication Bureau MPEG Motion Pictures Expert Group, a joint commit

46、tee of ISO and IEC SMPTE Society of Motion Picture and Television Engineers 4 Burst-info 4.1 General The 16-bit burst-info contains information about the data which will be found in the data-burst. Fields of burst-info is specified in Table 1. Table 1 Fields of burst-info Bits of Pc Value Contents0-

47、4 Data-type 0-31 See Table 2 5-6 Subdata-type 0-3 See Table 2 7 Error-flag 0 Error-flag indicating a valid burst-payload 1 Error-flag indicating that the burst-payload may contain errors 8-12 Data-type-dependent info 13-15 0-7 Bit-stream-number NOTE Refer to IEC 61937-1, 6.1.7 and 6.1.7.1. 4.2 Data-

48、type and subdata-type Data type defined in PC bits 0-6 in IEC 61937-1 consists of conventional data-type (0-4) and subdata-type (5-6) for historical reasons. All data-types are defined in Table 2. Any combination of data-type and subdata-type which is not defined in Table 2 shall not be transmitted.

49、 8 61937-2 IEC:2007(E) Table 2 Data-types Data-type Value of PC bit 0-4 Subdata-type Value of PC bit 5-6 Contents Reference point R Repetition period of data-burst measured in IEC 60958 frames 0 0 Null data See Note 1 1 0 AC-3 data R-AC-3 1 536 2 0 3 Refer to SMPTE 338M 3 0 Pause bit 0 of Pa See Note 2 4 0 MPEG-1 layer 1 data bit 0 of Pa 384 5 0 MPEG-1 layer 2 or 3 data or MPEG-2 without exten