IEC 61754-24-2009 Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces - Part 24 Type SC-RJ connector family《光纤互连装置和无源元件.光纤连接器接口.第24部分 SC-RJ 式连接器系列》.pdf

《IEC 61754-24-2009 Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces - Part 24 Type SC-RJ connector family《光纤互连装置和无源元件.光纤连接器接口.第24部分 SC-RJ 式连接器系列》.pdf》由会员分享，可在线阅读，更多相关《IEC 61754-24-2009 Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces - Part 24 Type SC-RJ connector family《光纤互连装置和无源元件.光纤连接器接口.第24部分 SC-RJ 式连接器系列》.pdf（60页珍藏版）》请在麦多课文档分享上搜索。

1、 IEC 61754-24 Edition 1.0 2009-09 INTERNATIONAL STANDARD NORME INTERNATIONALE Fibre optic interconnecting devices and passive components Fibre optic connector interfaces Part 24: Type SC-RJ connector family Dispositifs dinterconnexion et composants passifs fibres optiques Interfaces de connecteurs p

2、our fibres optiques Partie 24: Famille de connecteurs de type SC-RJ IEC 61754-24:2009 THIS PUBLICATION IS COPYRIGHT PROTECTED Copyright 2009 IEC, Geneva, Switzerland All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means

3、, electronic or mechanical, including photocopying and microfilm, without permission in writing from either IEC or IECs member National Committee in the country of the requester. If you have any questions about IEC copyright or have an enquiry about obtaining additional rights to this publication, p

4、lease contact the address below or your local IEC member National Committee for further information. Droits de reproduction rservs. Sauf indication contraire, aucune partie de cette publication ne peut tre reproduite ni utilise sous quelque forme que ce soit et par aucun procd, lectronique ou mcaniq

5、ue, y compris la photocopie et les microfilms, sans laccord crit de la CEI ou du Comit national de la CEI du pays du demandeur. Si vous avez des questions sur le copyright de la CEI ou si vous dsirez obtenir des droits supplmentaires sur cette publication, utilisez les coordonnes ci-aprs ou contacte

6、z le Comit national de la CEI de votre pays de rsidence. IEC Central Office 3, rue de Varemb CH-1211 Geneva 20 Switzerland Email: inmailiec.ch Web: www.iec.ch About the IEC The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes Internationa

7、l Standards for all electrical, electronic and related technologies. About IEC publications The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the latest edition, a corrigenda or an amendment might have been published. Catalogue of IEC

8、publications: www.iec.ch/searchpub The IEC on-line Catalogue enables you to search by a variety of criteria (reference number, text, technical committee,). It also gives information on projects, withdrawn and replaced publications. IEC Just Published: www.iec.ch/online_news/justpub Stay up to date o

9、n all new IEC publications. Just Published details twice a month all new publications released. Available on-line and also by email. Electropedia: www.electropedia.org The worlds leading online dictionary of electronic and electrical terms containing more than 20 000 terms and definitions in English

10、 and French, with equivalent terms in additional languages. Also known as the International Electrotechnical Vocabulary online. Customer Service Centre: www.iec.ch/webstore/custserv If you wish to give us your feedback on this publication or need further assistance, please visit the Customer Service

11、 Centre FAQ or contact us: Email: csciec.ch Tel.: +41 22 919 02 11 Fax: +41 22 919 03 00 A propos de la CEI La Commission Electrotechnique Internationale (CEI) est la premire organisation mondiale qui labore et publie des normes internationales pour tout ce qui a trait llectricit, llectronique et au

12、x technologies apparentes. A propos des publications CEI Le contenu technique des publications de la CEI est constamment revu. Veuillez vous assurer que vous possdez ldition la plus rcente, un corrigendum ou amendement peut avoir t publi. Catalogue des publications de la CEI: www.iec.ch/searchpub/cu

13、r_fut-f.htm Le Catalogue en-ligne de la CEI vous permet deffectuer des recherches en utilisant diffrents critres (numro de rfrence, texte, comit dtudes,). Il donne aussi des informations sur les projets et les publications retires ou remplaces. Just Published CEI: www.iec.ch/online_news/justpub Rest

14、ez inform sur les nouvelles publications de la CEI. Just Published dtaille deux fois par mois les nouvelles publications parues. Disponible en-ligne et aussi par email. Electropedia: www.electropedia.org Le premier dictionnaire en ligne au monde de termes lectroniques et lectriques. Il contient plus

15、 de 20 000 termes et dfinitions en anglais et en franais, ainsi que les termes quivalents dans les langues additionnelles. Egalement appel Vocabulaire Electrotechnique International en ligne. Service Clients: www.iec.ch/webstore/custserv/custserv_entry-f.htm Si vous dsirez nous donner des commentair

16、es sur cette publication ou si vous avez des questions, visitez le FAQ du Service clients ou contactez-nous: Email: csciec.ch Tl.: +41 22 919 02 11 Fax: +41 22 919 03 00 IEC 61754-24 Edition 1.0 2009-09 INTERNATIONAL STANDARD NORME INTERNATIONALE Fibre optic interconnecting devices and passive compo

17、nents Fibre optic connector interfaces Part 24: Type SC-RJ connector family Dispositifs dinterconnexion et composants passifs fibres optiques Interfaces de connecteurs pour fibres optiques Partie 24: Famille de connecteurs de type SC-RJ INTERNATIONAL ELECTROTECHNICAL COMMISSION COMMISSION ELECTROTEC

18、HNIQUE INTERNATIONALE U ICS 33.180.20 PRICE CODE CODE PRIX ISBN 978-2-88912-048-2 Registered trademark of the International Electrotechnical Commission Marque dpose de la Commission Electrotechnique Internationale 2 61754-24 IEC:2009 CONTENTS FOREWORD.4 INTRODUCTION.6 1 Scope.7 2 Normative reference

19、s .7 3 Description.7 4 Interfaces .7 4.1 General .7 4.2 Plug connector interface PC9 4.3 Plug connector interface APC 8 .12 4.4 Plug connector interface for A3c/A3d fibre.15 4.5 Plug connector interface for A4a*/A4d fibres .17 4.6 Adaptor connector interface 19 4.7 Active device interface 21 Annex A

20、 (normative) Colour / mechanical coding system .24 Annex B (normative) Cut out information27 Bibliography28 Figure 1 Plug connector interface PC (SM fibre) 9 Figure 2 Detail of spherically polished ferrule PC endface11 Figure 3 Plug connector interface APC 8 (SM fibre)12 Figure 4 Detail of angled po

21、lished ferrule endface (APC) .14 Figure 5 Plug connector interface for A3c/A3d fibre (HCS fibre type) .15 Figure 6 Plug connector interface for A4a*/A4d fibres (POF)17 Figure 7 Adaptor connector interface .19 Figure 8 Active device interface .21 Figure 9 Pin gauge for resilient alignment sleeve.23 F

22、igure A.1 Mechanical coding location with pin and clip.24 Figure A.2 Mechanical disposition of the keys (pin and clip).25 Figure B.1 Panel cut out information; mounting hole 2,3, or groove for M2 .27 Table 1 Title of the standard interfaces 8 Table 2 Interchangeability8 Table 3 Dimensions of plug co

23、nnector interface PC (SM fibre).10 Table 4 Dimensions of the spherically polished ferrule PC endface11 Table 5 Ferrule grades.11 Table 6 Dimensions of plug connector interface APC 8 (SM fibre) 13 Table 7 Dimensions of the angled polished ferrule endface (APC) .14 Table 8 Ferrule grades.14 Table 9 Di

24、mensions of plug connector interface for A3c/A3d fibres 16 Table 10 Ferrule grades.16 Table 11 Dimensions of plug connector interface for A4a*/A4d fibres (POF) 18 Table 12 Ferrule grade 18 61754-24 IEC:2009 3 Table 13 Dimensions of adaptor connector interface20 Table 14 Dimensions of active device i

25、nterface22 Table 15 Dimensions of pin gauge .23 Table A.1 Basic colours of the housing 24 Table A.2 Coloured code of mechanical pin (key; adaptor) and clip (frame; connector) 24 Table A.3 Mechanical disposition of the keys (pin and clip)26 Table B.1 Dimensions for mounting the fixed adaptor 27 4 617

26、54-24 IEC:2009 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS FIBRE OPTIC CONNECTOR INTERFACES Part 24: Type SC-RJ connector family FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization

27、comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International

28、Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this

29、preparatory work. International, governmental and non- governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two o

30、rganizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees. 3) IEC Publications have the f

31、orm of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpre

32、tation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or

33、regional publication shall be clearly indicated in the latter. 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any services carried

34、out by independent certification bodies. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its technical committees and IEC National Committ

35、ees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to t

36、he Normative references cited in this publication. Use of the referenced publications is indispensable for the correct application of this publication. International Standard IEC 61754-24 has been prepared by subcommittee 86B: Fibre optic interconnecting devices and passive components, of IEC techni

37、cal committee 86: Fibre optics. This bilingual version (2010-07) replaces the English version. The text of this standard is based on the following documents: FDIS Report on voting 86B/2884/FDIS 86B/2919/RVD Full information on the voting for the approval of this standard can be found in the report o

38、n voting indicated in the above table. The French version of this standard has not been voted upon. This publication has been drafted in accordance with the ISO/IEC Directives, Part 2. 61754-24 IEC:2009 5 A list of all parts of the IEC 61754 series, published under the general title: Fibre optic int

39、erconnecting devices and passive components Fibre optic connector interfaces, can be found on the IEC website. Future standards in this series will carry the new general title as cited above. Titles of existing standards in this series will be updated at the time of the next edition. The committee h

40、as decided that the contents of this publication will remain unchanged until the stability date indicated on the IEC web site under “http:/webstore.iec.ch“ in the data related to the specific publication. At this date, the publication will be reconfirmed, withdrawn, replaced by a revised edition, or

41、 amended. 6 61754-24 IEC:2009 INTRODUCTION Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. The International Electrotechnical Commission (IEC) draws

42、attention to the fact that it is claimed that compliance with this document may involve the use of a patent concerning a plug connector interface, adaptor connector interface and active connector interface given in Clause 4. IEC takes no position concerning the evidence, validity and scope of this p

43、atent right. The holder of this patent right has assured the IEC that he/she is willing to negotiate licences under reasonable and non-discriminatory terms and conditions with applicants throughout the world. In this respect, the statement of the holder of this patent right is registered with IEC. I

44、nformation may be obtained from: Reichle & De-Massari AG, Dept. of Standardization & Patent, Binzstrasse 31 CH-8622 Wetzikon ZH, Switzerland Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights other than those identified above. IEC sha

45、ll not be held responsible for identifying any or all such patent rights. 61754-24 IEC:2009 7 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS FIBRE OPTIC CONNECTOR INTERFACES Part 24: Type SC-RJ connector family 1 Scope This part of IEC 61754 defines the standard interface dimensions for

46、the type SC-RJ family of connectors. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments

47、) applies. IEC 60603-7-1, Connectors for electronic equipment Part 7-1:Detail specification for 8-way, shielded free and fixed connectors with common mating features, with assessed quality IEC 61076-3-106, Connectors for electronic equipment Product requirements Part 3-106: Rectangular connectors De

48、tail specification for protective housings for use with 8-way shielded and unshielded connectors for industrial environments incorporating the IEC 60603-7 series interface IEC 61754-4, Fibre optic connector interfaces Part 4 :Type SC connector family 3 Description The parent connector for type SC-RJ

49、 connector family is a duplex plug connector set of plug/adaptor configuration which is characterised by 2,5 mm nominal ferrule diameter. The connector includes a push-pull coupling mechanism, which is spring loaded relative to the ferrules in the direction of optical axes. The plug has three male keys. Two of them in each case are use