IEC 61591 AMD 2-2010 Household range hoods and other cooking fume extraktors - Methods for measuring performance《修改件2.家用抽油烟机和其他烹饪用烟雾抽吸装置.性能测量方法》.pdf

《IEC 61591 AMD 2-2010 Household range hoods and other cooking fume extraktors - Methods for measuring performance《修改件2.家用抽油烟机和其他烹饪用烟雾抽吸装置.性能测量方法》.pdf》由会员分享，可在线阅读，更多相关《IEC 61591 AMD 2-2010 Household range hoods and other cooking fume extraktors - Methods for measuring performance《修改件2.家用抽油烟机和其他烹饪用烟雾抽吸装置.性能测量方法》.pdf（14页珍藏版）》请在麦多课文档分享上搜索。

1、 IEC 61591 Edition 1.0 2010-07 INTERNATIONAL STANDARD Household range hoods and other cooking fume extractors Methods for measuring performance IEC 61591:1997/A2:2010(E) AMENDMENT 2 THIS PUBLICATION IS COPYRIGHT PROTECTED Copyright 2010 IEC, Geneva, Switzerland All rights reserved. Unless otherwise

2、specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either IEC or IECs member National Committee in the country of the requester. If you have any questions

3、 about IEC copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or your local IEC member National Committee for further information. IEC Central Office 3, rue de Varemb CH-1211 Geneva 20 Switzerland Email: inmailiec.ch Web: www.iec.ch A

4、bout the IEC The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes International Standards for all electrical, electronic and related technologies. About IEC publications The technical content of IEC publications is kept under constant rev

5、iew by the IEC. Please make sure that you have the latest edition, a corrigenda or an amendment might have been published. Catalogue of IEC publications: www.iec.ch/searchpub The IEC on-line Catalogue enables you to search by a variety of criteria (reference number, text, technical committee,). It a

6、lso gives information on projects, withdrawn and replaced publications. IEC Just Published: www.iec.ch/online_news/justpub Stay up to date on all new IEC publications. Just Published details twice a month all new publications released. Available on-line and also by email. Electropedia: www.electrope

7、dia.org The worlds leading online dictionary of electronic and electrical terms containing more than 20 000 terms and definitions in English and French, with equivalent terms in additional languages. Also known as the International Electrotechnical Vocabulary online. Customer Service Centre: www.iec

8、.ch/webstore/custserv If you wish to give us your feedback on this publication or need further assistance, please visit the Customer Service Centre FAQ or contact us: Email: csciec.ch Tel.: +41 22 919 02 11 Fax: +41 22 919 03 00 IEC 61591 Edition 1.0 2010-07 INTERNATIONAL STANDARD Household range ho

9、ods and other cooking fume extractors Methods for measuring performance INTERNATIONAL ELECTROTECHNICAL COMMISSION K ICS 97.040 PRICE CODE ISBN 978-2-88912-074-1 AMENDMENT 2 Registered trademark of the International Electrotechnical Commission 2 61591 Amend. 2 IEC:2010(E) FOREWORD This amendment has

10、been prepared by subcommittee 59K: Ovens and microwave ovens, cooking ranges and similar appliances, of IEC technical committee 59: Performance of household and similar electrical appliances. The text of this amendment is based on the following documents: FDIS Report on voting 59K/202/FDIS 59K/207/R

11、VD Full information on the voting for the approval of this amendment can be found in the report on voting indicated in the above table. The committee has decided that the contents of this amendment and the base publication will remain unchanged until the stability date indicated on the IEC web site

12、under “http:/webstore.iec.ch“ in the data related to the specific publication. At this date, the publication will be reconfirmed, withdrawn, replaced by a revised edition, or amended. A bilingual version of this publication may be issued at a later date. _ Title Change the title on the cover page, t

13、he title page, on pages 5 and 7, as follows: HOUSEHOLD RANGE HOODS AND OTHER COOKING FUME EXTRACTORS METHODS FOR MEASURING PERFORMANCE 1 Scope Add the following new sentence to the second paragraph as a last sentence: This standard deals also with down-draft systems arranged beside, behind or under

14、the cooking surface. 3 Definitions Add the following new definitions: 3.9 down-draft system cooking fume extractor intended for installation adjacent to household cooking ranges, hobs and similar cooking appliances that draws vapour down into an internal / exhaust duct 61591 Amend. 2 IEC:2010(E) 3 N

15、OTE The filtered air may be discharged back into the room or ducted away. 3.10 highest setting for normal use control setting of blower at highest speed for normal use, excluding the boost position setting NOTE Setting should be marked on the appliance and described in the instructions for use. 3.11

16、 boost position setting control setting for occasional use at a higher fan speed NOTE The setting shall be marked on the appliance and described in the instructions for use. 3.12 working point intersection point of pressure/air flow curve and flue curve as defined in Clause 11 6 General conditions f

17、or measurements 6.2 Installation Add to the first sentence after “the external blower”: “or the down-draft system” 6.3 Supply voltage Add to the first sentence after “the external blower”: “or the down-draft system” Add to the second sentence after “the external blower”: “or the down-draft system” 6

18、.4 Filters Add to the first sentence after “the range hood”: “or the down-draft system” 6.5 Fan control Replace the existing Note 2 by the following new Note 2: NOTE 2 A boost position is a setting for occasional use which results in a temporary higher fan speed. The boost position shall be clearly

19、marked. The boost position shall be described and explained in the user instructions. Add after Note 2 the following new paragraph and a new Note 3: Range hoods and other cooking fume extractors with a variable speed control shall be tested with the fan control adjusted to 75 % of the maximum airflo

20、w. This highest setting of the control for normal use shall be marked on the control panel and described in the instructions. NOTE 3 The 75% does not include the boost position. The range between 76% and 100% is considered as boost position. 4 61591 Amend. 2 IEC:2010(E) 7 Overall dimensions Add to t

21、he first sentence after “the range hood”: “or the down-draft system” Add to the third sentence after “the range hood”: “or the down-draft system” Add in the second paragraph after “range hoods”: “or the down-draft system” 9 Length of the supply cord Replace the first sentence in the first paragraph

22、with the following new sentence: The distance between the points of entry of the cord into the range hood, the external blower or the down-draft system and the plug is measured and stated in metres rounded downwards to the nearest 0,05 m. Replace the second paragraph with the following new paragraph

23、: It is stated if the range hood, the external blower or the down-draft system is for direct connection to the fixed wiring. 10 Mass of the range hood Replace the title of Clause 10 with the following new title: 10 Mass of the range hood or the down-draft system Replace the existing text with the fo

24、llowing new text: The mass of the range hood, the external blower or the down-draft system, including any filters, supply cord and plug, is measured and stated in kilograms, rounded upwards to the nearest 0,1 kg. 11 Volumetric airflow Replace the first sentence of the second paragraph with the follo

25、wing new sentence: The air outlet of the range hood, the external blower or the down-draft system is connected to a pressure compensation chamber (see Figure 1). Replace the last sentence of the second paragraph with the following new sentence: The grease filter is installed for the test. Replace th

26、e third paragraph with the following new paragraph: 61591 Amend. 2 IEC:2010(E) 5 The range hood, the external blower or the down-draft system is operated and by suitably adjusting the auxiliary fan or the baffle, the airflow corresponding to various pressures can be determined. Replace the fifth par

27、agraph with the following new paragraph: The airflow of recirculating-air devices is determined when the pressure in the compensation chamber is at ambient pressure. Replace the sixth paragraph with the following new paragraph: The airflow of air-extraction devices is determined for discharge into a

28、 flue, which has the following pressure drop depending on the diameter of the air outlet orifice: NOTE 1 Replace “range hood” with “device.” 12 Grease absorption Replace the first sentence of the second paragraph with the following new sentence: For range hoods with an external blower and down-draft

29、 systems the blower does not need to be mounted during the grease absorption test. Replace the first sentence of the third paragraph with the following new sentence: The mass of the range hood or down-draft systems is measured without the grease filter and without the odour extraction filter of reci

30、rculating-air “devices”. Replace the third sentence of the third paragraph with the following new sentence: The range hood or the down-draft system is installed in a chamber, the arrangement being such that all the air in the chamber has to pass through the device. Replace the sentence of the fourth

31、 paragraph with the following new sentence: The air outlet of the range hood or the down-draft system is connected to an absolute filter having a collecting efficiency of at least 99,995 %. Replace the last sentence of the fourth paragraph with the following new sentence: The arrangement is shown in

32、 Figure 3 and 3.A. Add the following new sentence after the first sentence of the sixth paragraph: For down-draft systems the hob element is placed according to Figure 3.A. Replace the first sentence of the seventh paragraph with the following new sentence: The range hood or the down-draft system is

33、 operated at the highest setting of the control, ignoring any boost setting. Replace the second sentence of the seventh paragraph with the following new sentence: 6 61591 Amend. 2 IEC:2010(E) The auxiliary fan is adjusted to the working point linked to the largest diameter the device under test allo

34、ws in delivery condition (see Figure 2). Replace the third sentence of the seventh paragraph with the following new sentence: The pressure above the recirculating-air devices is adjusted so that the airflow is that measured during the test of Clause 11. Replace the last sentence of the eighth paragr

35、aph with the following new sentence: The position of the pan and means for supplying the oil and water is also shown Figure 3 and 3.A. Replace the last sentence of the ninth paragraph with the following new sentence: The device under test and the auxiliary fan are switched off 10 min later. Replace

36、the first sentence of the tenth paragraph with the following new sentence: The range hood or the down-draft system is weighed again after removal of the grease filter and the mass of oil retained is determined. Replace the description of wr in the formula of the twelfth paragraph as follows: wr is t

37、he mass of oil retained in the airways of the range hood or the down-draft system; 13 Odour extraction Replace the first and the second sentences of the first paragraph with the following new sentences: This method is used to assess the effectiveness of odour filters of recirculating-air devices. It

38、 is also used to assess the capability of air-extraction devices to remove odours, in which case the airflow is adjusted to the actual working point (see Clause 11 and Figure 2). Add the following new sentence after the third sentence of the second paragraph: The down-draft system has to be installe

39、d according to the manufacturers instructions. Add the following new sentence after the fourth sentence of the second paragraph: For testing of down-draft systems all wall cabinets are removed. Replace the fifth sentence of the second paragraph with the following new sentence: If an air-extraction d

40、evices is being tested, it is necessary to provide a ventilating grille which can be closed and an air dispersion screen. Replace the seventh sentence of the second paragraph with the following new sentence: For range hoods or down-draft systems with an external blower, the external blower does not

41、need to be mounted during the odour extraction test. 61591 Amend. 2 IEC:2010(E) 7 NOTE 2 Replace “range hoods” with “devices”. Replace the first sentence of the third paragraph with the following new sentence: The characteristics of the test room are established without the range hood “or down-draft

42、 systems” being operated. NOTE 4 Replace the existing note 4 with the following new note 4: The concentration in the test room (C 1 ) can be measured without any range hood or down-draft system being installed. Replace the last sentence of the sixth paragraph with the following new sentence: They ar

43、e then fitted into the range hood or down-draft system which is operated for 30 min. Replace the first and the second sentences of the seventh paragraph with the following new sentences: The device under test is then operated and the MEK solution dripped onto the heated pan so that 312 g has evapora

44、ted within 30 min 15 s. The air-extraction devices are switched off, the ventilating grille closed, the shut-off valve closed and a fan having an airflow of 250 m 3 /h 50 m 3 /h positioned on the centre of the floor operated. Replace the fourth sentence of the seventh paragraph with the following ne

45、w sentence: With the recirculating-air devices still in operation, the time taken for the concentration of MEK to fall from C 2to 15 % of C 1is also determined. NOTE 7 Replace the existing note 7 with the following new note 7: Recirculating-air devices are not switched off before measuring C 2 . NOT

46、E 8 Replace the existing note 8 with the following new note 8: The odour dispersion time is not measured for devices. Replace the description of C 1and C 2 in the formula of the eighth paragraph as follows: C 1is the concentration of MEK at the end of application without the device under test operat

47、ing; C 2is the concentration of MEK at the end of application with the device under test operating. 14 Effectiveness of the hob light Replace the second paragraph by the following new paragraph: 8 61591 Amend. 2 IEC:2010(E) The hob light is switched on and a suitable lux meter is used to measure the

48、 luminance at the points on the board described below. Replace the third paragraph by the following new paragraphs: If the cooker hood is intended to be installed over a 600 mm hob, the measurement points are point 1, 2, 3, 4 and 5. The arithmetic average of the five measurements is calculated and t

49、his value is stated as the luminance in lux. If the cooker hood is intended to be installed over a hob larger than 600 mm, the measurement points are points 1, 2, 3, 4, 5, 6, 7, 8 and 9. The arithmetic average of the nine measurements is calculated and this value is stated as the luminance in lux. Island range hoods (directly mounted on the ceiling) are mounted above the measurement plane. The centre lines of the hood shall be identical to the centre lines of the measurement plane. 15 Maintenanc