IEC 61558-2-5-2010 Safety of transformers reactors power supply units and combinations thereof - Part 2-5 Particular requirements and tests for transformators for shavers power sup.pdf

《IEC 61558-2-5-2010 Safety of transformers reactors power supply units and combinations thereof - Part 2-5 Particular requirements and tests for transformators for shavers power sup.pdf》由会员分享，可在线阅读，更多相关《IEC 61558-2-5-2010 Safety of transformers reactors power supply units and combinations thereof - Part 2-5 Particular requirements and tests for transformators for shavers power sup.pdf（34页珍藏版）》请在麦多课文档分享上搜索。

1、 IEC 61558-2-5Edition 2.0 2010-06INTERNATIONAL STANDARD NORME INTERNATIONALESafety of transformers, reactors, power supply units and combinations thereof Part 2-5: Particular requirements and test for transformer for shavers, power supply units for shavers and shaver supply units Scurit des transfor

2、mateurs, bobines dinductance, blocs dalimentation et des combinaisons de ces lments Partie 2-5: Rgles particulires et essais pour les transformateurs pour rasoirs, blocs dalimentation incorporant un transformateur pour rasoirs et blocs dalimentation pour rasoirs IEC61558-2-5:2010 GROUP SAFETY PUBLIC

3、ATION PUBLICATION GROUPE DE SCURITTHIS PUBLICATION IS COPYRIGHT PROTECTED Copyright 2010 IEC, Geneva, Switzerland All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying a

4、nd microfilm, without permission in writing from either IEC or IECs member National Committee in the country of the requester. If you have any questions about IEC copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or your local IEC me

5、mber National Committee for further information. Droits de reproduction rservs. Sauf indication contraire, aucune partie de cette publication ne peut tre reproduite ni utilise sous quelque forme que ce soit et par aucun procd, lectronique ou mcanique, y compris la photocopie et les microfilms, sans

6、laccord crit de la CEI ou du Comit national de la CEI du pays du demandeur. Si vous avez des questions sur le copyright de la CEI ou si vous dsirez obtenir des droits supplmentaires sur cette publication, utilisez les coordonnes ci-aprs ou contactez le Comit national de la CEI de votre pays de rside

7、nce. IEC Central Office 3, rue de Varemb CH-1211 Geneva 20 Switzerland Email: inmailiec.ch Web: www.iec.ch About the IEC The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes International Standards for all electrical, electronic and relat

8、ed technologies. About IEC publications The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the latest edition, a corrigenda or an amendment might have been published. Catalogue of IEC publications: www.iec.ch/searchpub The IEC on-line C

9、atalogue enables you to search by a variety of criteria (reference number, text, technical committee,). It also gives information on projects, withdrawn and replaced publications. IEC Just Published: www.iec.ch/online_news/justpub Stay up to date on all new IEC publications. Just Published details t

10、wice a month all new publications released. Available on-line and also by email. Electropedia: www.electropedia.org The worlds leading online dictionary of electronic and electrical terms containing more than 20 000 terms and definitions in English and French, with equivalent terms in additional lan

11、guages. Also known as the International Electrotechnical Vocabulary online. Customer Service Centre: www.iec.ch/webstore/custserv If you wish to give us your feedback on this publication or need further assistance, please visit the Customer Service Centre FAQ or contact us: Email: csciec.ch Tel.: +4

12、1 22 919 02 11 Fax: +41 22 919 03 00 A propos de la CEI La Commission Electrotechnique Internationale (CEI) est la premire organisation mondiale qui labore et publie des normes internationales pour tout ce qui a trait llectricit, llectronique et aux technologies apparentes. A propos des publications

13、 CEI Le contenu technique des publications de la CEI est constamment revu. Veuillez vous assurer que vous possdez ldition la plus rcente, un corrigendum ou amendement peut avoir t publi. Catalogue des publications de la CEI: www.iec.ch/searchpub/cur_fut-f.htm Le Catalogue en-ligne de la CEI vous per

14、met deffectuer des recherches en utilisant diffrents critres (numro de rfrence, texte, comit dtudes,). Il donne aussi des informations sur les projets et les publications retires ou remplaces. Just Published CEI: www.iec.ch/online_news/justpub Restez inform sur les nouvelles publications de la CEI.

15、Just Published dtaille deux fois par mois les nouvelles publications parues. Disponible en-ligne et aussi par email. Electropedia: www.electropedia.org Le premier dictionnaire en ligne au monde de termes lectroniques et lectriques. Il contient plus de 20 000 termes et dfinitions en anglais et en fra

16、nais, ainsi que les termes quivalents dans les langues additionnelles. Egalement appel Vocabulaire Electrotechnique International en ligne. Service Clients: www.iec.ch/webstore/custserv/custserv_entry-f.htm Si vous dsirez nous donner des commentaires sur cette publication ou si vous avez des questio

17、ns, visitez le FAQ du Service clients ou contactez-nous: Email: csciec.ch Tl.: +41 22 919 02 11 Fax: +41 22 919 03 00 IEC 61558-2-5Edition 2.0 2010-06INTERNATIONAL STANDARD NORME INTERNATIONALESafety of transformers, reactors, power supply units and combinations thereof Part 2-5: Particular requirem

18、ents and test for transformer for shavers, power supply units for shavers and shaver supply units Scurit des transformateurs, bobines dinductance, blocs dalimentation et des combinaisons de ces lments Partie 2-5: Rgles particulires et essais pour les transformateurs pour rasoirs, blocs dalimentation

19、 incorporant un transformateur pour rasoirs et blocs dalimentation pour rasoirs INTERNATIONAL ELECTROTECHNICAL COMMISSION COMMISSION ELECTROTECHNIQUE INTERNATIONALE PICS 29.180 PRICE CODECODE PRIXISBN 978-2-88912-035-2 Registered trademark of the International Electrotechnical Commission Marque dpos

20、e de la Commission Electrotechnique Internationale GROUP SAFETY PUBLICATION PUBLICATION GROUPE DE SCURIT 2 61558-2-5 IEC:2010 CONTENTS FOREWORD.3 1 Scope.5 2 Normative references6 3 Terms and definitions .6 4 General requirements .6 5 General notes on tests6 6 Ratings.7 7 Classification 7 8 Marking

21、and other information.7 9 Protection against electric shock.8 10 Change of input voltage setting .8 11 Output voltage and output current under load 8 12 No-load output voltage8 13 Short-circuit voltage9 14 Heating.9 15 Short-circuit and overload protection .9 16 Mechanical strength9 17 Protection ag

22、ainst harmful ingress of dust, solid objects and moisture.10 18 Insulation resistance, dielectric strength, and leakage current .10 19 Construction .10 20 Components .12 21 Internal wiring.13 22 Supply connection and other external flexible cables or cords13 23 Terminals for external conductors .13

23、24 Provision for protective earthing13 25 Screws and connections .13 26 Creepage distances, clearances and distances through insulation .13 27 Resistance to heat, fire, and tracking 13 28 Resistance to rusting 14 Annexes15 Bibliography15 Table 101 Values of heights of fall10 61558-2-5 IEC:2010 3 INT

24、ERNATIONAL ELECTROTECHNICAL COMMISSION _ SAFETY OF TRANSFORMERS, REACTORS, POWER SUPPLY UNITS AND COMBINATIONS THEREOF Part 2-5: Particular requirements and test for transformer for shavers, power supply units for shavers and shaver supply units FOREWORD 1) The International Electrotechnical Commiss

25、ion (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in

26、addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee int

27、erested in the subject dealt with may participate in this preparatory work. International, governmental and non-governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance

28、with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all intereste

29、d IEC National Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible

30、for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence betwe

31、en any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity assessment services and, in some areas, access to IEC marks of con

32、formity. IEC is not responsible for any services carried out by independent certification bodies. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and mem

33、bers of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication

34、or any other IEC Publications. 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attention is drawn to the possibility that some of the elements of this IEC Publication

35、may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. International Standard IEC 61558-2-5 has been prepared by IEC technical committee 96: Transformers, reactors, power supply units and combinations thereof. This second edition cancels

36、 and replaces the first edition published in 1997. It constitutes a technical revision. The main changes consist of updating this part in accordance with IEC 61558-1:2005 and adding power supply units to the scope. This part has the status of a group safety publication in accordance with IEC Guide 1

37、04: 1997, The preparation of safety publications and the use of basic safety publications and group safety publications. 4 61558-2-5 IEC:2010 The text of this standard is based on the following documents: FDIS Report on voting 96/353/FDIS 96/360/RVD Full information on the voting for the approval of

38、 this standard can be found in the report on voting indicated in the above table. This publication has been drafted in accordance with ISO/IEC Directives, Part 2. This part is intended to be used in conjunction with the latest edition of IEC 61558-1 and its amendments. It is based on the second edit

39、ion (2005) of that standard. This part supplements or modifies the corresponding clauses in IEC 61558-1, so as to convert that publication into the IEC standard: Particular requirements and test for transformer for shavers, power supply units for shavers and shaver supply units. A list of all parts

40、of the IEC 61558 series, under the general title: Safety of transformers, reactors, power supply units and combinations thereof, can be found on the IEC website. Future standards in this series will carry the new general title as cited above. Titles of existing standards in this series will be updat

41、ed at the time of the next edition. Where a particular subclause of Part 1 is not mentioned in this part, that subclause applies as far as is reasonable. Where this part states “addition“, “modification“ or “replacement“, the relevant text of Part 1 is to be adopted accordingly. In this part, the fo

42、llowing print types are used: requirements proper: in roman type; test specifications: in italic type; explanatory matters: in smaller roman type. In the text of this part, the words in bold are defined in Clause 3. Subclauses additional to those in Part 1 are numbered starting from 101; supplementa

43、ry annexes are entitled AA, BB, etc. The committee has decided that the contents of this publication will remain unchanged until the stability date indicated on the IEC web site under “http:/webstore.iec.ch“ in the data related to the specific publication. At this date, the publication will be recon

44、firmed, withdrawn, replaced by a revised edition, or amended. NOTE The attention of National Committees is drawn to the fact that equipment manufacturers and testing organizations may need a transitional period following publication of a new, amended or revised IEC publication in which to make produ

45、cts in accordance with the new requirements and to equip themselves for conducting new or revised tests. It is the recommendation of the committee that the content of this publication be adopted for implementation nationally not earlier than 12 months from the date of publication. 61558-2-5 IEC:2010

46、 5 SAFETY OF TRANSFORMERS, REACTORS, POWER SUPPLY UNITS AND COMBINATIONS THEREOF Part 2-5: Particular requirements and test for transformer for shavers, power supply units for shavers and shaver supply units 1 Scope Replacement: This part of IEC 61558 deals with the safety of shaver transformers, po

47、wer supply units incorporating a shaver transformer, and shaver supply units. Shaver transformers incorporating electronic circuits are also covered by this standard. NOTE 1 Safety includes electrical, thermal, mechanical and chemical aspects. Unless otherwise specified, from here onward, the term t

48、ransformer covers shaver transformers and power supply units incorporating shaver transformers and shaver supply units. This part is applicable to stationary, single phase air-cooled (natural or forced), independent or associated dry- type transformers. The windings may be encapsulated or non-encaps

49、ulated. This standard is applicable to transformers and power supply (linear) with internal operational frequencies not exceeding 500 Hz. This standard used in combination with Part 2-16 for switch mode power supply units (SMPS) is also applicable to power supplies with internal operational frequencies higher than 500 Hz. Where the two requirements are in conflict the most severe take precedence. The rated su