IEC 61162-3-2008 Maritime navigation and radiocommunication equipment and systems - Digital interfaces - Part 3 Serial data instrument network《海上导航和无线电通信设备及系统.数字接口.第3部分 串联数据设备网络》.pdf

《IEC 61162-3-2008 Maritime navigation and radiocommunication equipment and systems - Digital interfaces - Part 3 Serial data instrument network《海上导航和无线电通信设备及系统.数字接口.第3部分 串联数据设备网络》.pdf》由会员分享，可在线阅读，更多相关《IEC 61162-3-2008 Maritime navigation and radiocommunication equipment and systems - Digital interfaces - Part 3 Serial data instrument network《海上导航和无线电通信设备及系统.数字接口.第3部分 串联数据设备网络》.pdf（22页珍藏版）》请在麦多课文档分享上搜索。

1、 IEC 61162-3Edition 1.0 2008-05INTERNATIONAL STANDARD Maritime navigation and radiocommunication equipment and systems Digital interfaces Part 3: Serial data instrument network IEC61162-3:2008(E) THIS PUBLICATION IS COPYRIGHT PROTECTED Copyright 2008 IEC, Geneva, Switzerland All rights reserved. Unl

2、ess otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either IEC or IECs member National Committee in the country of the requester. If you have

3、 any questions about IEC copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or your local IEC member National Committee for further information. IEC Central Office 3, rue de Varemb CH-1211 Geneva 20 Switzerland Email: inmailiec.ch Web

4、: www.iec.ch About the IEC The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes International Standards for all electrical, electronic and related technologies. About IEC publications The technical content of IEC publications is kept unde

5、r constant review by the IEC. Please make sure that you have the latest edition, a corrigenda or an amendment might have been published. Catalogue of IEC publications: www.iec.ch/searchpub The IEC on-line Catalogue enables you to search by a variety of criteria (reference number, text, technical com

6、mittee,). It also gives information on projects, withdrawn and replaced publications. IEC Just Published: www.iec.ch/online_news/justpub Stay up to date on all new IEC publications. Just Published details twice a month all new publications released. Available on-line and also by email. Electropedia:

7、 www.electropedia.org The worlds leading online dictionary of electronic and electrical terms containing more than 20 000 terms and definitions in English and French, with equivalent terms in additional languages. Also known as the International Electrotechnical Vocabulary online. Customer Service C

8、entre: www.iec.ch/webstore/custserv If you wish to give us your feedback on this publication or need further assistance, please visit the Customer Service Centre FAQ or contact us: Email: csciec.ch Tel.: +41 22 919 02 11 Fax: +41 22 919 03 00 IEC 61162-3Edition 1.0 2008-05INTERNATIONAL STANDARD Mari

9、time navigation and radiocommunication equipment and systems Digital interfaces Part 3: Serial data instrument network INTERNATIONAL ELECTROTECHNICAL COMMISSION QICS 47.020.70 PRICE CODEISBN 2-8318-9811-0 2 61162-3 IEC:2008(E) CONTENTS FOREWORD.3 INTRODUCTION.5 1 Scope.6 2 Normative references .6 3

10、Terms, definitions and conventions.7 3.1 Terms and definitions 7 3.2 Conventions 10 4 Physical layer.10 4.1 CAN transceiver 10 4.2 Environmental .10 4.3 Radio frequency interference.10 4.3.1 Unwanted electromagnetic emissions 10 4.3.2 Immunity to electromagnetic environment10 4.4 Cables.10 4.5 Inter

11、face power .11 4.6 Network power source.11 5 Data link layer 11 6 Network layer .11 7 Network management.11 7.1 Address configuration method .11 7.2 Address retention 11 8 Application layer.11 8.1 Parameter groups11 8.1.1 Parameter group priority11 8.1.2 Parameter group broadcast rate 12 9 Test crit

12、eria 12 10 Application notes12 11 Manufacturers documentation12 Annex A (informative) System integration 13 Figure A.1 Example of configuration 15 Figure A.2 Example of configuration 15 Table A.1 Test characteristics14 61162-3 IEC:2008(E) 3 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ MARITIME NAVIGA

13、TION AND RADIOCOMMUNICATION EQUIPMENT AND SYSTEMS DIGITAL INTERFACES Part 3: Serial data instrument network FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). T

14、he object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Speci

15、fications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non-governmental organizations

16、 liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters e

17、xpress, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Com

18、mittees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC Nati

19、onal Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC provides no

20、 marking procedure to indicate its approval and cannot be rendered responsible for any equipment declared to be in conformity with an IEC Publication. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, se

21、rvants or agents including individual experts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publica

22、tion, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attention is drawn to the possibili

23、ty that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. International Standard IEC 61162-3 has been prepared by IEC technical committee 80: Maritime navigation and radiocommunication eq

24、uipment and systems. The text of this standard is based on the following documents: CDV Report on voting 80/496/CDV 80/526/RVC Full information on the voting for the approval of this standard can be found in the report on voting indicated in the above table. This publication has been drafted in acco

25、rdance with the ISO/IEC Directives, Part 2. 4 61162-3 IEC:2008(E) A list of all parts of the IEC 61162 series, under the general title Maritime navigation and radiocommunication equipment and systems Digital interfaces, can be found on the IEC website. The committee has decided that the contents of

26、this publication will remain unchanged until the maintenance result date indicated on the IEC web site under “http:/webstore.iec.ch“ in the data related to the specific publication. At this date, the publication will be reconfirmed, withdrawn, replaced by a revised edition, or amended. A bilingual v

27、ersion of this publication may be issued at a later date. 61162-3 IEC:2008(E) 5 INTRODUCTION This part of IEC 61162 has been developed by the IEC technical committee 80 working group 6, to meet the requirement for a versatile and economic means of connecting a wide range of marine navigation and rad

28、iocommunications equipment aboard SOLAS vessels. The National Marine Electronics Associations Standard Committee has developed the NMEA 20001standard. The NMEA22000 Standard provides for capabilities across all classes of vessels. The development of NMEA 2000 began in 1994 and was completed in 1999.

29、 More than a dozen manufacturers worldwide conducted a two-year beta test. The finalised NMEA 2000 standard version 1.000 was published in 2001. IEC and NMEA have worked together since 1999 to ensure that the NMEA 2000 standard fully supports SOLAS applications. NMEA 2000 version 1.200 was published

30、 in 2004, with expanded support for redundant messaging and for equipments such as AIS. The need for an improved standard, compared with IEC 61162-1 and IEC 61162-2, has arisen due to the increased complexity of the latest equipment and systems. This requires multiple links between equipment and gre

31、atly improved communication speed. The parts 400 of the IEC 61162 series have already been issued and cater for the most complex systems to be found on board a ship. This new part 3 of IEC 61162 adopts the controller area network (CAN) technology, already well established for many industrial systems

32、. This permits a versatile system to be established with the minimum of effort and reasonable cost. The equipment types supported and the sentence data content developed for IEC 61162-1 has been retained. IEC 61162-3 describes a low cost, moderate capacity, bi-directional multi-transmitter/multi-rec

33、eiver instrument network to interconnect marine electronic equipment. The connectors and cables used are compatible with industrial bus systems for instance DeviceNetTM3and ProfibusTM4. IEC 61162-3 provides for the application of NMEA 2000 aboard SOLAS vessels. Exceptions, additions and specific req

34、uirements for implementation upon SOLAS vessels are contained in this document. 1NMEA 2000 is the registered trademark of the National Marine Electronics Association, Inc. This information is given for the convenience of users of this International Standard and does not constitute an endorsement by

35、IEC of the trademark holder or any of its products. Compliance to this profile does not require use of the trade name. Use of the trade name requires permission of the trade holder. 2NMEA is the registered trademark of the National Marine Electronics Association, Inc. This information is given for t

36、he convenience of users of this International Standard and does not constitute an endorsement by IEC of the trademark holder or any of its products. Compliance to this profile does not require use of the trade name. Use of the trade name requires permission of the trade holder. 3DeviceNetTMis the re

37、gistered trademark of the Open DeviceNet Vendor Association, Inc. This information is given for the convenience of users of this International Standard and does not constitute an endorsement by IEC of the trademark holder or any of its products. Compliance to this profile does not require use of the

38、 trade name. Use of the trade name requires permission of the trade holder. 4ProfibusTMis the registered trademark of PROFIBUS International. This information is given for the convenience of users of this International Standard and does not constitute an endorsement by IEC of the trademark holder or

39、 any of its products. Compliance to this profile does not require use of the trade name. Use of the trade name requires permission of the trade holder. 6 61162-3 IEC:2008(E) MARITIME NAVIGATION AND RADIOCOMMUNICATION EQUIPMENT AND SYSTEMS DIGITAL INTERFACES Part 3: Serial data instrument network 1 S

40、cope This part of IEC 61162 is based upon the NMEA 2000 standard. The NMEA 2000 standard contains the requirements for the minimum implementation of a serial-data communications network to interconnect marine electronic equipment onboard vessels. Equipment designed to this standard will have the abi

41、lity to share data, including commands and status, with other compatible equipment over a single signalling channel. Data messages are transmitted as a series of data frames, each with robust error check confirmed frame delivery and guaranteed latency times. As the actual data content of a data fram

42、e is at best 50 % of the transmitted bits, this standard is primarily intended to support relatively brief data messages, which may be periodic, transmitted as needed, or on-demand by use of query commands. Typical data includes discrete parameters such as position latitude and longitude, GPS status

43、 values, steering commands to autopilots, finite parameter lists such as waypoints, and moderately sized blocks of data such as electronic chart database updates. This standard is not necessarily intended to support high-bandwidth applications such as radar, electronic chart or other video data, or

44、other intensive database or file transfer applications. This standard defines all of the pertinent layers of the International Standards Organisation Open Systems Interconnect (ISO/OSI) model, from the application layer to the physical layer, necessary to implement the required IEC 61162-3 network f

45、unctionality. This standard defines data formats, network protocol, and the minimum physical layer necessary for devices to interface. SOLAS applications shall employ redundant designs (for instance dual networks, redundant network interface circuits) to reduce the impact of single point failures. T

46、he NMEA 2000 standard provides the fundamental tools and methods to support redundant equipment, buses and messaging. Specific shipboard installation designs are beyond the scope of this standard, however some guidance is given in Annex A. 2 Normative references The following referenced documents ar

47、e indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. IEC 60945, Maritime navigation and radiocommunication equipment and systems General re

48、quirements Methods of testing and required test results ISO 11783 (all parts), Tractors and machinery for agriculture and forestry Serial control and communications data network ISO 11783-3, Tractors and machinery for agriculture and forestry Serial control and communications data network Part 3: Da

49、ta link layer 61162-3 IEC:2008(E) 7 ISO 11783-5:2001, Tractors and machinery for agriculture and forestry Serial control and communications data network Part 5 Network management (including its corrigendum 1 (2002) NMEA 2000 Main document, Version 1.200: October 2004, Serial-Data Networking Of Marine Electronic Devices5NMEA 2000, Appendix A, Version 1.200: October 2004, Serial-Data Networking Of Marine Electronic Devices Application Layer (Parameter Group Definitions