IEC 60384-15-2-1984 Fixed capacitors for use in electronic equipment Part 15 Sectional specification Fixed tantalum capacitors with non-solid or solid electrolyte Blank detail sp.pdf

《IEC 60384-15-2-1984 Fixed capacitors for use in electronic equipment Part 15 Sectional specification Fixed tantalum capacitors with non-solid or solid electrolyte Blank detail sp.pdf》由会员分享，可在线阅读，更多相关《IEC 60384-15-2-1984 Fixed capacitors for use in electronic equipment Part 15 Sectional specification Fixed tantalum capacitors with non-solid or solid electrolyte Blank detail sp.pdf（32页珍藏版）》请在麦多课文档分享上搜索。

1、NORME CE1 INTERNATIONALE IEC INTERNATIONAL 60384-1 5-2 STANDARD QC 300202 Premire dition First edition 1984-1 2 Condensateurs fixes utiliss dans les quipements lectroniques - Partie 15: Spcification particulire-cad re - Condensateurs fixes au tantale, lectrolyte non solide et anode poreuse Niveau da

2、ssurance E Fixed capacitors for use in electronic equipment - Part 15: Blank detail specification - Fixed tantalum capacitors with non-solid electrolyte and porous anode Assessment level E Numro de rfrence Reference number CEI/IEC 60384-15-2: 1984 Numros des publications Depuis le ler janvier 1997,

3、les publications de la CE1 sont numrotes partir de 60000. Publications consolides Les versions consolides de certaines publications de la CE1 incorporant les amendements sont disponibles. Par exemple, les numros ddition 1.0, 1.1 et 1.2 indiquent respectivement la publication de base, la publication

4、de base incorporant lamendement 1, et la publication de base incorporant les amendements 1 et 2. Validit de la prsente publication Le contenu technique des publications de la CE1 est constamment revu par la CE1 afin quil reflete ltat actuel de la technique. Des renseignements relatifs la date de rec

5、onfir- mation de la publication sont disponibles dans le Catalogue de la CEI. Les renseignements relatifs des questions ltude et des travaux en cours entrepris par le comit technique qui a tabli cette publication, ainsi que la liste des publications tablies, se trouvent dans les documents ci- dessou

6、s: Site web de la CEI* Catalogue des publications de la CE1 Publi annuellement et mis jour rgulirement (Catalogue en ligne)* Bulletin de la CE1 Disponible la fois au sur la page de titre. Numbering As from 1 January 1997 all IEC publications are issued with a designation in the 60000 series. Consoli

7、dated publications Consolidated versions of some IEC publications including amendments are available. For example, edition numbers 1 .O, 1 .I and 1.2 refer, respectively, to the base publication, the base publication incor- porating amendment 1 and the base publication incorporating amendments 1 and

8、 2. Validity of this publication The technical content of IEC publications is kept under constant review by the IEC, thus ensuring that the content reflects current technology. Information relating to the date of the reconfirmation of the publication is available in the IEC catalogue. information on

9、 the subjects under consideration and work in progress undertaken by the technical committee which has prepared this publication, as well as the list of publications issued, is to be found at the following IEC sources: IEC web site* Catalogue of IEC publications Published yearly with regular updates

10、 (On-line catalogue)* Available both at the IEC web site* and as a printed periodical IEC Bulletin Terminology, graphical and letter symbols For general terminology, readers are referred to I EC 60050: International Electrotechnical Vocabulary (IEV). For graphical symbols, and letter symbols and sig

11、ns approved by the IEC for general use, readers are referred to publications IEC 60027: Letter symbols to be used in electrical technology, IEC 60417: Graphical symbols for use on equipment. Index, survey and compilation of the single sheets and IEC 60617: Graphical symbols for diagrams. * See web s

12、ite address on title page. NORME INTERNATIONALE INTERNATIONAL STANDARD CE1 IEC 60384-1 5-2 QC 300202 Premire dition First edition 1984-1 2 Condensateurs fixes utiliss dans les quipements lectroniques - Partie 15: Spcification particulire-cadre - Condensateurs fixes au tantale, lectrolyte non solide

13、et anode poreuse Niveau dassurance E Fixed capacitors for use in electronic equipment - Part 15: Blank detail specification - Fixed tantalum capacitors with non-solid electrolyte and porous anode Assessment level E O IEC 1984 Droits de reproduction rservs -Copyright - ail rights reserved Aucune part

14、ie de cette publication ne peut tre reproduite ni No part of this publication may be reproduced or utilized in utilise sous quelque forme que ce soit et par aucun any form or by any means, electronic or mechanical, procd, lectronique ou mcanique, y compris la photo- including photocopying and microf

15、ilm. without permission in copie et les microfilms, sans laccord crit de Iditeur. writing from the publisher. International Electrotechnical Commission Telefax: +41 22 919 0300 3, rue de Varemb Geneva, Switzerland IEC web site http: /www.iec.ch e-mail: inmailiec.ch N CODE PRIX PRICE CODE Pour prix.

16、voir catalogue en vigueur For price. see current catalogue Commission Electrotechnique Internationale International Electrotechnical Commission MeMAYHapoAHaR 3JleKTpOT6XHH4eCWR KOMHCCHR O -2- COMMISSION LECTROTECHNIQUE Rgle des Six Mois 40(BC)530 384-15-2 0 C E I 1984 INTERNATIONALE Rapport de vote

17、40(BC)562 CONDENSATEURS FIXES Quinzime partie : Spcification particulire-cadre : Condensateurs fixes au tantale, lectrolyte non solide et anode poreuse Niveau dassurance E UTILISS DANS LES QUIPEMENTS LECTRONIQUES PRAMBULE I) Les dcisions ou accords offciels de la C E I en ce qui concerne les questio

18、ns techniques, prpars par des Comits dEtudes ou sont reprsents tous les Comits nationaux sintressant ces questions, expriment dans la plus grande mesure possible un accord international sur les sujets examins. 2) Ces dcisions constituent des recommandations internationales et sont agres comme telles

19、 par les Comits natio- naux. 3) Dans le but dencourager runification internationale, la C E I exprime le vu que tous les Comits nationaux adoptent dans leurs rgles nationales le texte de la recommandation de la C E I, dans la mesure o les conditions nationales le permettent. Toute divergence entre l

20、a recommandation de la C E I et la rgle nationale correspondante doit, dans la mesure du possible, tre indique en termes clairs dans cette dernire. PRFACE 384-15-2 0 I E C 1984 -3- INTERNATIONAL ELECTROTECHNICAL COMMISSION FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT Part 15: Blank detail specif

21、ication: Fixed tantalum capacitors with non-solid electrolyte and porous anode Assessment level E FOREWORD The formal decisions or agreements of the I E C on technical matters, prepared by Technical Committees on which all the National Committees having a special interest therein are represented, ex

22、press, as nearly as possible, an international consensus of opinion on the subjects dealt with. They have the form of recommendations for international use and they are accepted by the National Committees in that sense. In order to promote international unification, the I E C expresses the wish that

23、 all National Committees should adopt the text of the I E C recommendation for their national rules in so far as national conditions will permit. Any divergence between the I E C recommendation and the corresponding national rules should, as far as possible, be clearly indicated in the latter. PREFA

24、CE This standard has been prepared by I E C Technical Committee No. 40: Capacitors and Resistors for Electronic Equipment. The text of this standard is based upon the following documents: Six Months Rule 40(C0)530 Report on Voting Further information can be found in the Report on Voting indicated in

25、 the table above. Other I E C publications quoted in this standard: Publications Nos. 384-1 (1982): Fixed Capacitors for Use in Electronic Equipment. Part 1: Generic Specifi- 384-15 (1982): Part 15: Sectional Specification: Fixed Tantalum Capacitors with Non-solid or cation. Solid Electrolyte. 410 (

26、1973): Sampling Plans and Procedures for Inspection by Attributes. -4- 384-15-2 0 C E I 1984 CONDENSATEURS FIXES UTILISS DANS LES QUIPEMENTS LECTRONIQUES Quinzime partie : Spcification particulire-cadre : Condensateurs fixes au tantale, lectrolyte non solide et anode poreuse Niveau dassurance E INTR

27、ODUCTION Spcification particuiire-cadre Une spcification particulire-cadre est un document, complmentaire de la spcification inter- mdiaire, comprenant les rgles concernant le style, la prsentation et le contenu minimal des spcifications particulires. Les spcifications particulires ne rpondant pas c

28、es rgles ne sont pas considres conformes aux spcifications de la C E I et ne doivent pas tre dclares comme telles. Le contenu du paragraphe 1.4 de la spcification intermdiaire doit tre pris en compte lors de la Les numros placs entre crochets dans la premire page correspondent aux informations prpar

29、ation des spcifications particulires. suivantes, qui doivent tre introduites a lemplacement indiqu. Identijcation de la spcification particulire i a Commission Electrotechnique Internationale) ou nom de lorganisme National de Norma- lisation sous lautorit duquel la spcification particulire est tabli

30、e. 121 Numro C E I ou national de la spcification particulire, date ddition et toutes autres informations exiges par le systme national. Numro et dition de la spcification gnrique nationale ou C E I. Numro C E I de la spcification particulire-cadre. 3 4 Identijcation du condensateur Courte descripti

31、on du type de condensateur. Indications sur la technologie de base (si applicable). Note. - Lorsque le condensateur nest pas conu pour lutilisation sur des cartes imprimes, cela doit tre clairement tabli a cet emplacement dans la spcification particulire. Croquis avec les principales dimensions, imp

32、ortantes pour linterchangeabilit, et/ou rf- rences correspondant aux documents nationaux ou internationaux appropris. Au choix, ce croquis peut tre donn dans une annexe la spcification particulire. Utilisation ou ensemble dutilisations couvertes et/ou niveau dassurance. Note. - Le($ niveau(x) dassur

33、ance utilis(s) dans une spcification particulire doit (doivent) tre chois) dans la spcification intermdiaire, paragraphe 3.5.4. Ceci implique quune spcification particulire-cadre peut tre utilise en combinaison avec plusieurs niveaux dassurance, pourvu que le groupement des essais ne change pas. Don

34、nes relatives aux proprits les plus importantes, permettant la comparaison entre les divers types de condensateurs. 384-15-2 0 I EC 1984 -5- FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT Part 15 : Blank detail specification : Fixed tantalum capacitors with non-solid electrolyte and porous anode A

35、ssessment level E INTRODUCTION Blank detail specification A blank detail specification is a supplementary document to the Sectional Specification and contains requirements for style and layout and minimum content of detail specifications. Detail specifications not complying with these requirements m

36、ay not be considered as being in accord- ance with I E C specifications nor shall they so be described. In the preparation of detail specifications the content of Sub-clause 1.4 of the sectional The numbers between brackets on the first page correspond to the following information which specificatio

37、n shall be taken into account. shall be inserted in the position indicated. IdentiJication of the detail specification i The “International Electrotechnical Commission” or the National Standards Organization under whose authority the detail specification is drafted. 2 The I E C or National Standards

38、 number of the detail specification, date of issue and any further information required by the national system. The number and issue number of the I E C or national Generic Specification. The I E C number of the blank detail specification. 3 4 Identification of the capacitor A short description of t

39、he type of capacitor. Information on typical construction (when applicable). Note. - When the capacitor is not designed for use in printed board applications, this shall be clearij stated in the detail specification in this position. Outline drawing with main dimensions which are of importance for i

40、nterchangeability and/or reference to the national or international documents for outlines. Alternatively, this drawing may be given in an appendix to the detail specification. Application or group of applications covered and/or assessment level. Note. - The assessment level) to be used in a detail

41、specification shall be selected from the sectional specification, Sub-clause 3.5.4. This implies that one blank detail specification may be used in combination with several assessment levels, provided the grouping of the tests does not change. Reference data on the most important properties, to allo

42、w comparison between the various capacitor types. -6- 384-15-2 0 C EI 1984 I COMPOSANTS LECTRONIQUES DE QUALIT CONTROLE CONFORMEMENT : C E I 384- 15-2-XXX QC 300202-XXX C E I 384-15-2 QC 300202 121 I 41 151 CONDENSATEURS FIXES AU TANTALE kLECTROLYTE NON SOLIDE ET ANODE POREUSE, A SORTIES PAR FILS OU

43、 BORNES (Sous-famille 2) Croquis dencombrement: (voir tableau I) (Projection: Mthode du . . . didre) Technologie de base: 171 (Dautres formes sont permises a lintrieur des dimensions donnes) Niveau(x) dassurance: E Classe de performance: 181 Les informations sur la disponibilit des composants qualif

44、is selon cette spcification particulire sont donnes dans la Liste des Produits Qualifis. 384-15-2 0 I E C 1984 -7- ELECTRONIC COMPONENTS OF ASSESSED QUALITY IN ACCORDANCE WITH: Pl Outline drawing: (see Table I) (. . . angle projection) (Other shapes are permitted within the dimensions given) I E C 3

45、84-1 5-2-XXX QC 300202-XXX I E C 384-15-2 QC 300202 41 FIXED TANTALUM 51 CAPACITORS WITH NON-SOLID ELECTROLYTE AND POROUS ANODE WITH LEAD OR TAG TERMINATIONS (Subfamily 2) Typical construction : 61 Assessment level) : E Performance grade : Information on the availability of components qualified to t

46、his detail specification is given in the Qualified Products List. -8- 384-15-2 0 C E I 1984 Tension nominale Tension de catgorie * Botier Botier Botier Capacit nominale (en PF) SECTION UN - CARACTRISTIQUES GNRALES Botier 1. Caractristiques gnrales 1.1 Mthode(s) de montage recommande(s) (a introduire

47、) (Voir paragraphe 1.4.2 de la Publication 384-15 de la C E I) 1.2 Dimensions TABLEAU I Rfrence du TABLEAU I I l 1 Dimensions (en millimtres ou inches et millimtres) Rfrence du botier 0 L H d . . . . . . . . . Notes 1. - Lorsquil ny a pas de rfrence de botier, le tableau I peut tre omis et les dimen

48、sions doivent tre 2. - Les dimensions doivent tre donnes en valeurs maximales ou en valeurs nominales avec tolrance. 3. - I1 peut tre ncessaire de prsenter autrement ces informations, mais la prsentation ci-dessus devrait donnes dans le tableau IIA qui devient alors tableau I. autant que possible tre suivie. 1.3 Caractristiques Gamme de capacit (voir tableau IIA) Tolrance sur la capacit nominale Tension nominale (voir tableau IIA) Tension de catgorie (si applicable) (voir tableau IIA) Catgorie climatique Temprature nominale Variation de capacit avec la temprature (voir