IEC 60077-2-2017 Railway applications - Electric equipment for rolling stock - Part 2 Electrotechnical components - General rules《轨道交通.机车车辆用电气设备 第2部分 电工元件 一般规则》.pdf

《IEC 60077-2-2017 Railway applications - Electric equipment for rolling stock - Part 2 Electrotechnical components - General rules《轨道交通.机车车辆用电气设备 第2部分 电工元件 一般规则》.pdf》由会员分享，可在线阅读，更多相关《IEC 60077-2-2017 Railway applications - Electric equipment for rolling stock - Part 2 Electrotechnical components - General rules《轨道交通.机车车辆用电气设备 第2部分 电工元件 一般规则》.pdf（76页珍藏版）》请在麦多课文档分享上搜索。

1、 IEC 60077-2 Edition 2.0 2017-07 INTERNATIONAL STANDARD NORME INTERNATIONALE Railway applications Electric equipment for rolling stock Part 2: Electrotechnical components General rules Applications ferroviaires Equipements lectriques du matriel roulant Partie 2: Composants lectrotechniques Rgles gnr

2、ales IEC 60077-2:2017-07(en-fr) THIS PUBLICATION IS COPYRIGHT PROTECTED Copyright 2017 IEC, Geneva, Switzerland All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and

3、 microfilm, without permission in writing from either IEC or IECs member National Committee in the country of the requester. If you have any questions about IEC copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or your local IEC memb

4、er National Committee for further information. Droits de reproduction rservs. Sauf indication contraire, aucune partie de cette publication ne peut tre reproduite ni utilise sous quelque forme que ce soit et par aucun procd, lectronique ou mcanique, y compris la photocopie et les microfilms, sans la

5、ccord crit de lIEC ou du Comit national de lIEC du pays du demandeur. Si vous avez des questions sur le copyright de lIEC ou si vous dsirez obtenir des droits supplmentaires sur cette publication, utilisez les coordonnes ci-aprs ou contactez le Comit national de lIEC de votre pays de rsidence. IEC C

6、entral Office Tel.: +41 22 919 02 11 3, rue de Varemb Fax: +41 22 919 03 00 CH-1211 Geneva 20 infoiec.ch Switzerland www.iec.ch About the IEC The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes International Standards for all electrical,

7、 electronic and related technologies. About IEC publications The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the latest edition, a corrigenda or an amendment might have been published. IEC Catalogue - webstore.iec.ch/catalogue The st

8、and-alone application for consulting the entire bibliographical information on IEC International Standards, Technical Specifications, Technical Reports and other documents. Available for PC, Mac OS, Android Tablets and iPad. IEC publications search - www.iec.ch/searchpub The advanced search enables

9、to find IEC publications by a variety of criteria (reference number, text, technical committee,). It also gives information on projects, replaced and withdrawn publications. IEC Just Published - webstore.iec.ch/justpublished Stay up to date on all new IEC publications. Just Published details all new

10、 publications released. Available online and also once a month by email. Electropedia - www.electropedia.org The worlds leading online dictionary of electronic and electrical terms containing 20 000 terms and definitions in English and French, with equivalent terms in 16 additional languages. Also k

11、nown as the International Electrotechnical Vocabulary (IEV) online. IEC Glossary - std.iec.ch/glossary 65 000 electrotechnical terminology entries in English and French extracted from the Terms and Definitions clause of IEC publications issued since 2002. Some entries have been collected from earlie

12、r publications of IEC TC 37, 77, 86 and CISPR. IEC Customer Service Centre - webstore.iec.ch/csc If you wish to give us your feedback on this publication or need further assistance, please contact the Customer Service Centre: csciec.ch. A propos de lIEC La Commission Electrotechnique Internationale

13、(IEC) est la premire organisation mondiale qui labore et publie des Normes internationales pour tout ce qui a trait llectricit, llectronique et aux technologies apparentes. A propos des publications IEC Le contenu technique des publications IEC est constamment revu. Veuillez vous assurer que vous po

14、ssdez ldition la plus rcente, un corrigendum ou amendement peut avoir t publi. Catalogue IEC - webstore.iec.ch/catalogue Application autonome pour consulter tous les renseignements bibliographiques sur les Normes internationales, Spcifications techniques, Rapports techniques et autres documents de l

15、IEC. Disponible pour PC, Mac OS, tablettes Android et iPad. Recherche de publications IEC - www.iec.ch/searchpub La recherche avance permet de trouver des publications IEC en utilisant diffrents critres (numro de rfrence, texte, comit dtudes,). Elle donne aussi des informations sur les projets et le

16、s publications remplaces ou retires. IEC Just Published - webstore.iec.ch/justpublished Restez inform sur les nouvelles publications IEC. Just Published dtaille les nouvelles publications parues. Disponible en ligne et aussi une fois par mois par email. Electropedia - www.electropedia.org Le premier

17、 dictionnaire en ligne de termes lectroniques et lectriques. Il contient 20 000 termes et dfinitions en anglais et en franais, ainsi que les termes quivalents dans 16 langues additionnelles. Egalement appel Vocabulaire Electrotechnique International (IEV) en ligne. Glossaire IEC - std.iec.ch/glossar

18、y 65 000 entres terminologiques lectrotechniques, en anglais et en franais, extraites des articles Termes et Dfinitions des publications IEC parues depuis 2002. Plus certaines entres antrieures extraites des publications des CE 37, 77, 86 et CISPR de lIEC. Service Clients - webstore.iec.ch/csc Si vo

19、us dsirez nous donner des commentaires sur cette publication ou si vous avez des questions contactez-nous: csciec.ch. IEC 60077-2 Edition 2.0 2017-07 INTERNATIONAL STANDARD NORME INTERNATIONALE Railway applications Electric equipment for rolling stock Part 2: Electrotechnical components General rule

20、s Applications ferroviaires Equipements lectriques du matriel roulant Partie 2: Composants lectrotechniques Rgles gnrales INTERNATIONAL ELECTROTECHNICAL COMMISSION COMMISSION ELECTROTECHNIQUE INTERNATIONALE ICS 45.060.01 ISBN 978-2-8322-4424-1 Registered trademark of the International Electrotechnic

21、al Commission Marque dpose de la Commission Electrotechnique Internationale Warning! Make sure that you obtained this publication from an authorized distributor. Attention! Veuillez vous assurer que vous avez obtenu cette publication via un distributeur agr. 2 IEC 60077-2:2017 IEC 2017 CONTENTS FORE

22、WORD . 4 1 Scope 6 2 Normative references 7 3 Terms, definitions and abbreviated terms 7 3.1 Components . 7 3.2 Component parts 9 3.3 Operational features . 11 3.4 Abbreviated terms . 14 4 Classification . 15 5 Characteristics 15 5.1 List of characteristics 15 5.2 Type of component . 15 5.3 Rated an

23、d limiting values for the main circuit 16 5.3.1 General . 16 5.3.2 Rated voltages 16 5.3.3 Rated currents . 16 5.3.4 Rated time constants (for DC switchgear) 16 5.3.5 Rated power factor (for AC switchgear) . 17 5.4 Operational frequencies 17 5.5 Component categories 17 5.6 Electric control circuits

24、17 5.7 Pneumatic control circuits . 18 5.8 Manual control 18 5.9 Electric auxiliary circuits . 18 5.10 Pneumatic auxiliary circuits . 19 5.11 Peak arc voltages . 19 6 Product information . 19 6.1 Nature of the information 19 6.1.1 General . 19 6.1.2 Component documentation 19 6.1.3 Other information

25、 . 20 6.2 Marking . 20 6.3 Instructions for storage, installation, operation and maintenance 20 7 Normal service conditions 21 8 Constructional and performance requirements . 21 8.1 Constructional requirements . 21 8.1.1 General . 21 8.1.2 Terminals and connecting capacity 21 8.1.3 Protective bondin

26、g terminal . 21 8.2 Performance requirements 21 8.2.1 Operating conditions 21 8.2.2 Temperature limits . 22 8.2.3 Operation following inactivity . 23 8.2.4 Electromagnetic compatibility (EMC) . 23 8.2.5 Acoustic noise emission 23 IEC 60077-2:2017 IEC 2017 3 8.2.6 Clearances 23 8.2.7 Creepage distanc

27、es . 23 8.2.8 Switching overvoltages 23 8.2.9 Operational performance capability 23 8.2.10 Ability to withstand vibration and shock . 25 8.2.11 Ability to withstand short-time current 25 9 Tests . 25 9.1 Kinds of tests 25 9.2 Verification of constructional requirements 26 9.3 Type tests . 26 9.3.1 T

28、est sequences . 26 9.3.2 General test conditions 26 9.3.3 Test sequence I: General performance characteristics . 27 9.3.4 Test sequence II: Rated service making and breaking capacities (if appropriate) . 28 9.3.5 Test sequence III: Ability to withstand vibration and shock . 30 9.3.6 Test sequence IV

29、: Critical currents range 31 9.3.7 Test sequence V: Climatic conditions 31 9.3.8 Test sequence VI: Other tests 32 9.4 Routine tests. 32 9.4.1 General . 32 9.4.2 Functional test . 32 9.4.3 Measurement of resistance or impedance 32 9.4.4 Air-tightness (for pneumatic components) 32 9.4.5 Dielectric wit

30、hstand . 32 9.4.6 Check on the setting and operation of protective equipment and relays (calibration) . 32 Annex A (normative) Correspondence between auxiliary contacts and steady states of switchgear 33 Bibliography 35 Figure A.1 Relationship between auxiliary contacts and steady states of switchge

31、ar 34 Table 1 Rated time constants . 17 Table 2 Temperature rise limits and temperature limits 22 Table 3 Operational performance capability for category A1 components . 24 Table 4 Operational performance capability for category A2 components . 24 Table 5 Operational performance capability for categ

32、ory A3 components . 25 Table 6 Operational performance capability for category A4 components . 25 Table 7 List of test sequences . 26 Table 8 Tolerances on test values 27 Table 9 Test method and severity 31 4 IEC 60077-2:2017 IEC 2017 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ RAILWAY APPLICATIONS

33、ELECTRIC EQUIPMENT FOR ROLLING STOCK Part 2: Electrotechnical components General rules FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is t

34、o promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and G

35、uides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non- governmental organizations liaising with the I

36、EC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as

37、 possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sens

38、e. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees unde

39、rtake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC itself does not provide any att

40、estation of conformity. Independent certification bodies provide conformity assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any services carried out by independent certification bodies. 6) All users should ensure that they have the latest edition

41、 of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct

42、 or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensabl

43、e for the correct application of this publication. 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. International Standard IEC 60077-2 has b

44、een prepared by IEC technical committee 9: Electrical equipment and systems for railways. This second edition cancels and replaces the first edition of IEC 60077-2, issued in 1999. It constitutes a technical revision. This edition includes the following main technical changes with regard to the prev

45、ious edition: a) Short circuit breaking capacity; b) Rated short-time withstand current; c) Critical currents range; d) Climatic conditions are specified. This standard is to be read in conjunction with IEC 60077-1. IEC 60077-2:2017 IEC 2017 5 The text of this standard is based on the following docu

46、ments: FDIS Report on voting 9/2267/FDIS 9/2279/RVD Full information on the voting for the approval of this standard can be found in the report on voting indicated in the above table. A list of all parts in the IEC 60077 series, published under the general title Railway applications Electric equipme

47、nt for rolling stock, can be found on the IEC website. This publication has been drafted in accordance with the ISO/IEC Directives, Part 2. The committee has decided that the contents of this publication will remain unchanged until the stability date indicated on the IEC website under “http:/webstor

48、e.iec.ch“ in the data related to the specific publication. At this date, the publication will be reconfirmed, withdrawn, replaced by a revised edition, or amended. 6 IEC 60077-2:2017 IEC 2017 RAILWAY APPLICATIONS ELECTRIC EQUIPMENT FOR ROLLING STOCK Part 2: Electrotechnical components General rules

49、1 Scope In addition to the rules given in IEC 60077-1, this part of IEC 60077 provides general rules for all electrotechnical components installed in power circuits, auxiliary circuits, control and indicating circuits, etc., on railway rolling stock. The purpose of this document is to adapt the general rules given in IEC 60077-1 to all electrotechnical components for rolling stock, in or