IEC 60068-2-18-2017 Environmental testing - Part 2-18 Tests - Test R and guidance Water《环境试验 第2-18部分 试验 随机试验指南 水》.pdf

《IEC 60068-2-18-2017 Environmental testing - Part 2-18 Tests - Test R and guidance Water《环境试验 第2-18部分 试验 随机试验指南 水》.pdf》由会员分享，可在线阅读，更多相关《IEC 60068-2-18-2017 Environmental testing - Part 2-18 Tests - Test R and guidance Water《环境试验 第2-18部分 试验 随机试验指南 水》.pdf（144页珍藏版）》请在麦多课文档分享上搜索。

1、 IEC 60068-2-18 Edition 3.0 2017-03 REDLINE VERSION Environmental testing Part 2-18: Tests Test R and guidance: Water IEC 60068-2-18:2017-03 RLV(en) colour inside THIS PUBLICATION IS COPYRIGHT PROTECTED Copyright 2017 IEC, Geneva, Switzerland All rights reserved. Unless otherwise specified, no part

2、of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either IEC or IECs member National Committee in the country of the requester. If you have any questions about IEC copyrigh

3、t or have an enquiry about obtaining additional rights to this publication, please contact the address below or your local IEC member National Committee for further information. IEC Central Office Tel.: +41 22 919 02 11 3, rue de Varemb Fax: +41 22 919 03 00 CH-1211 Geneva 20 infoiec.ch Switzerland

4、www.iec.ch About the IEC The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes International Standards for all electrical, electronic and related technologies. About IEC publications The technical content of IEC publications is kept under

5、constant review by the IEC. Please make sure that you have the latest edition, a corrigenda or an amendment might have been published. IEC Catalogue - webstore.iec.ch/catalogue The stand-alone application for consulting the entire bibliographical information on IEC International Standards, Technical

6、 Specifications, Technical Reports and other documents. Available for PC, Mac OS, Android Tablets and iPad. IEC publications search - www.iec.ch/searchpub The advanced search enables to find IEC publications by a variety of criteria (reference number, text, technical committee,). It also gives infor

7、mation on projects, replaced and withdrawn publications. IEC Just Published - webstore.iec.ch/justpublished Stay up to date on all new IEC publications. Just Published details all new publications released. Available online and also once a month by email. Electropedia - www.electropedia.org The worl

8、ds leading online dictionary of electronic and electrical terms containing 20 000 terms and definitions in English and French, with equivalent terms in 16 additional languages. Also known as the International Electrotechnical Vocabulary (IEV) online. IEC Glossary - std.iec.ch/glossary 65 000 electro

9、technical terminology entries in English and French extracted from the Terms and Definitions clause of IEC publications issued since 2002. Some entries have been collected from earlier publications of IEC TC 37, 77, 86 and CISPR. IEC Customer Service Centre - webstore.iec.ch/csc If you wish to give

10、us your feedback on this publication or need further assistance, please contact the Customer Service Centre: csciec.ch. IEC 60068-2-18 Edition 3.0 2017-03 REDLINE VERSION Environmental testing Part 2-18: Tests Test R and guidance: Water INTERNATIONAL ELECTROTECHNICAL COMMISSION ICS 19.040 ISBN 978-2

11、-8322-4106-6 Registered trademark of the International Electrotechnical Commission Warning! Make sure that you obtained this publication from an authorized distributor. colour inside 2 IEC 60068-2-18:2017 RLV IEC 2017 CONTENTS FOREWORD . 5 INTRODUCTION . 7 1 Scope and object . 8 2 Normative referenc

12、es 8 3 Terms and definitions 8 4 Survey of water tests . 9 4.1 General . 9 4.2 Description of tests R: water . 9 5 Test Ra: falling drops 10 5.1 Object . 10 5.2 Method Ra 1: artificial rain 10 5.2.1 General description of the test . 10 5.2.2 Severities 11 5.2.3 Preconditioning 11 5.2.4 Initial measu

13、rements . 11 5.2.5 Testing 11 5.2.6 Recovery . 12 5.2.7 Final measurements 12 5.2.8 Information to be given in the relevant specification . 12 5.3 Method Ra 2: drip box . 13 5.3.1 General description of the test . 13 5.3.2 Severities 13 5.3.3 Preconditioning 14 5.3.4 Initial measurements . 14 5.3.5

14、Testing 14 5.3.6 Recovery . 14 5.3.7 Final measurements 14 5.3.8 Information to be given in the relevant specification . 14 6 Test Rb: impacting water . 15 6.1 Object . 15 6.2 Method Rb 1: oscillating tube and spray nozzle . 15 6.2.1 General description of the test . 15 6.2.2 Method Rb 1.1: oscillat

15、ing tube 15 6.2.3 Method Rb 1.2: spray nozzle . 19 6.3 Method Rb 2: water jet 21 6.3.1 General description of the test . 21 6.3.2 Severities 21 6.3.3 Preconditioning 22 6.3.4 Initial measurements . 22 6.3.5 Testing 22 6.3.6 Recovery . 22 6.3.7 Final measurements 23 6.3.8 Information to be given in t

16、he relevant specification . 23 6.4 Method Rb 3: fan jet . 23 6.4.1 General description of the test . 23 6.4.2 Severities 24 IEC 60068-2-18:2017 RLV IEC 2017 3 6.4.3 Preconditioning 24 6.4.4 Initial measurements . 24 6.4.5 Testing 24 6.4.6 Recovery . 24 6.4.7 Final measurements 24 6.4.8 Information t

17、o be given in the relevant specification . 25 7 Test Rc: immersion 25 7.1 Object . 25 7.2 Method Rc 1: water tank . 25 7.2.1 General description . 25 7.2.2 Severities 25 7.2.3 Preconditioning 26 7.2.4 Initial measurements . 26 7.2.5 Testing 26 7.2.6 Recovery . 26 7.2.7 Final measurements 26 7.2.8 In

18、formation to be given in the relevant specification . 26 7.3 Method Rc 2: pressurized water chamber . 27 7.3.1 General description of the test . 27 7.3.2 Severities 27 7.3.3 Preconditioning 27 7.3.4 Initial measurements . 27 7.3.5 Testing 27 7.3.6 Recovery . 28 7.3.7 Final measurements 28 7.3.8 Info

19、rmation to be given in the relevant specification . 28 Annex A (informative) Water characteristics to be considered when writing the relevant specification 29 A.1 General . 29 A.2 Purity 29 A.2.1 General . 29 A.2.2 Effect on test specimen . 29 A.2.3 Effect on test apparatus . 29 A.2.4 Ingress of wat

20、er into the specimen 30 A.3 Water quality for tests R . 30 A.3.1 Test Ra: falling drops. 30 A.3.2 Test Rb: impacting water . 30 A.3.3 Test Rc: immersion 30 Annex B (informative) General guidance 31 B.1 General . 31 B.2 Factors affecting the test severity . 31 Annex C (informative) Guidance for test

21、Ra . 32 C.1 General . 32 C.2 Example of test apparatus 32 C.2.1 Method Ra 1: artificial rain . 32 C.2.2 Method Ra 2: drip box . 33 C.3 Verification of test apparatus 34 C.3.1 Intensity . 34 C.3.2 Drop size . 34 4 IEC 60068-2-18:2017 RLV IEC 2017 C.3.3 Resistivity and pH value 34 Annex D (informative

22、) Guidance for test Rb . 36 D.1 General . 36 D.2 Example of test apparatus 36 D.2.1 Method Rb 1: oscillating tube and spray nozzle . 36 D.2.2 Method Rb 2: water jet . 37 D.2.3 Method Rb 3: fan jet nozzle . 38 Annex E (informative) Guidance for test Rc 45 E.1 General . 45 E.2 Example of test apparatu

23、s 45 E.2.1 Method Rc 1: water tank 45 E.2.2 Method Rc 2: pressurized water chamber 45 E.3 Verification of test apparatus 45 Bibliography 46 Figure 1 Structuring of test methods and equivalence with the IP Code of IEC 60529 10 Figure 2 Test Ra, definitions of angles and axes 12 Figure C.1 Test Ra 1,

24、test apparatus and measurement setup for drop sizes and intensity for artificial rain method 33 Figure C.2 Test Ra 2, recommended test apparatus for the drip box method 35 Figure D.1 Test Rb 1.1, recommended test apparatus for the oscillating tube method . 37 Figure D.2 Distribution of mean value of

25、 precipitation intensity in the oscillating tube area for the above-specified measurement conditions . 39 Figure D.3 Test Rb 1.2, recommended test apparatus for the spray nozzle method 40 Figure D.4 Standard test nozzle for the water jet method (hose nozzle) . 40 Figure D.5 Standard test nozzle for

26、the fan jet method . 41 Figure D.6 Fan jet nozzle resulting dimensions of spraying hole for checking purpose . 41 Figure D.7 Example of different quality achievements of the surface finish of the fan jet nozzle 42 Figure D.8 Set-up for measuring the impact force of the water jet for determining the

27、protection against high-pressure and high-temperature water jets . 43 Figure D.9 Impact force distribution . 43 Figure D.10 Test setup for determining the protection against high-pressure and high-temperature water jet for small enclosures 44 Table 1 Oscillating tube Relationship of number of nozzle

28、s and total water flow to tube radius 17 Table A.1 Typical characteristics of water with approximate values 30 IEC 60068-2-18:2017 RLV IEC 2017 5 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ ENVIRONMENTAL TESTING Part 2-18: Tests Test R and guidance: Water FOREWORD 1) The International Electrotechnic

29、al Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this e

30、nd and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Com

31、mittee interested in the subject dealt with may participate in this preparatory work. International, governmental and non- governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in

32、accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from al

33、l interested IEC National Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held r

34、esponsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any diver

35、gence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity assessment services and, in some areas, access to IEC m

36、arks of conformity. IEC is not responsible for any services carried out by independent certification bodies. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual expe

37、rts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC P

38、ublication or any other IEC Publications. 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attention is drawn to the possibility that some of the elements of this IEC P

39、ublication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. DISCLAIMER This Redline version is not an official IEC Standard and is intended only to provide the user with an indication of what changes have been made to the previous

40、version. Only the current version of the standard is to be considered the official document. This Redline version provides you with a quick and easy way to compare all the changes between this standard and its previous edition. A vertical bar appears in the margin wherever a change has been made. Ad

41、ditions are in green text, deletions are in strikethrough red text. 6 IEC 60068-2-18:2017 RLV IEC 2017 International Standard IEC 60068-2-18 has been prepared by IEC technical committee 104: Environmental conditions, classification and methods of test. This third edition cancels and replaces the sec

42、ond edition published in 2000. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: a) addition of the new test method Rb 3. The text of this standard is based on the following documents: FDIS Report on

43、 voting 104/719/FDIS 104/722/RVD Full information on the voting for the approval of this standard can be found in the report on voting indicated in the above table. This publication has been drafted in accordance with the ISO/IEC Directives, Part 2. A list of all parts in the IEC 60068 series, publi

44、shed under the general title Environmental testing, can be found on the IEC website. The committee has decided that the contents of this publication will remain unchanged until the stability date indicated on the IEC website under “http:/webstore.iec.ch“ in the data related to the specific publicati

45、on. At this date, the publication will be reconfirmed, withdrawn, replaced by a revised edition, or amended. IMPORTANT The colour inside logo on the cover page of this publication indicates that it contains colours which are considered to be useful for the correct understanding of its contents. User

46、s should therefore print this document using a colour printer. IEC 60068-2-18:2017 RLV IEC 2017 7 INTRODUCTION It is the intention of this part of IEC 60068 to fulfil the function of a basic publication 1)by making water tests available to product committees. A number of water tests are described in

47、 other IEC publications. Some of them are well established, for example, the test for classification of the second characteristic numeral of the IP Code, of IEC 60529. This document incorporates the majority of the most widely used tests, as well as making available further methods and increasing th

48、e number of severities. _ 1)IEC Guide 108:1994, The relationship between technical committees with horizontal functions and product committees and the use of basic publications 8 IEC 60068-2-18:2017 RLV IEC 2017 ENVIRONMENTAL TESTING Part 2-18: Tests Test R and guidance: Water 1 Scope and object Thi

49、s part of IEC 60068 provides methods of test applicable to products which, during transportation, storage or in service, may can be subjected to falling water drops, impacting water, immersion or high pressure water impact. The primary purpose of water tests is to verify the ability of enclosures, covers and seals to maintain components and equipment in good working order after and, when necessary, under a standardized drop field or immersion in water. These