GA 1000-2012_en IDENTIFICATION OF GYPSUM BOARD《》.pdf

《GA 1000-2012_en IDENTIFICATION OF GYPSUM BOARD《》.pdf》由会员分享，可在线阅读，更多相关《GA 1000-2012_en IDENTIFICATION OF GYPSUM BOARD《》.pdf（2页珍藏版）》请在麦多课文档分享上搜索。

1、GA-1000-12 Copyright Gypsum Association 2012. All rights reserved. Page 1 of 2 Printed in U.S.A. IDENTIFICATION OF GYPSUM BOARD (GA-1000-12) Gypsum board is the name for a family of sheet products consisting of a noncombustible core primarily of gypsum with a paper surfacing or facing. Examples of g

2、ypsum board products may be identified by reviewing Gypsum Association publication, GA-223, Gypsum Panel Products Types, Uses, Sizes, and Standards. Contemporary model building codes enforced throughout the United States and Canada require gypsum board to be manufactured to ASTM C1396, Standard Spec

3、ification for Gypsum Board. Specification C1396 is referenced in the International Building Code, International Residential Code, the NFPA 5000: Building Construction and Safety Code, and the National Building Code of Canada. By reference, ASTM C1396 mandates that gypsum board is to be marked in acc

4、ordance with ASTM C1264, Standard Specification for Sampling, Inspection, Rejection, Certification, Packaging, Marking, Shipping, Handling, and Storage of Gypsum Panel Products. Specification C1264 requires each panel or package of panels to be legibly marked with specific information, including, bu

5、t not limited to, the product thickness, the name of the producer or supplier, and the ASTM product standard. The required information is most often printed on the bundling tape that binds two individual panels into a single shipping package. In 2011, Specification C1264 was modified to require each

6、 individual sheet of gypsum board manufactured to comply with Specification C1396 to have the following information legibly printed on the back surface of each board, parallel to the bound edge of the board: The name of the manufacturing company or a unique alpha code identifying the name of the man

7、ufacturing company. The decision to print the name of the company or to create and use a unique code is at the discretion of the company. A code identifying the manufacturing facility and, where applicable in a multi-line facility, the production line. A code identifying the date and time of manufac

8、ture. The country of manufacture as designated by the three letter code in ISO 3166-1. The information does not have to be printed along both bound edges of the board. The printing may incorporate any legible size character or font. Additional information may be added at the discretion of the manufa

9、cturer. GA-1000-12 Copyright Gypsum Association 2012. All rights reserved. Page 2 of 2 Printed in U.S.A. A sample code might appear as follows: The three letter country identifica-tion code is the current alpha-3 code as published in ISO 3166-1, Codes for the representation of names of countries and

10、 their sub-divisions Part 1: Country codes. A copy of the standard is available from International Organization for Standardization (ISO), Geneva, Switzerland. www.iso.org To facilitate identification, a truncated version of the codes listed in the standard appears below. The list displays the origi

11、n code for the countries that regularly or occasionally provide gypsum board in or export to the United States. Additional information on country of origin codes may be obtained from the ISO 3166-1 standard or by contacting the Gypsum Association. The requirement mandating the labeling of each indiv

12、idual panel applies to all gypsum board manufactured to the ASTM C1396 standard with the exception of board that is packaged as single, unbound panels in multi-panel units. These units are typically packaged to meet specific contractual requirements, most often to satisfy manufacturing requirements

13、established by the manufactured or modular housing industry, and as such cannot legibly be labeled as individual units. As a result, the standard permits multi-panel units to be labeled as a palletized packaging unit. GYPSUM ASSOCIATION 6525 BELCREST ROAD, SUITE 480 HYATTSVILLE, MD 20782 301-277-868

14、6 Fax: 301-277-8747 E-mail: infogypsum.org for a complete list of our members go to: http:/www.gypsum.org ISO Alpha-3 Code ISO Country Name (English)BEL Belgium BRA Brazil CAN Canada CHN China COL Colombia DEU Germany DNK Denmark HON Honduras ITA Italy MEX Mexico USA United States of America This do

15、cument may be revised or withdrawn from circulation at any time. The status of the document should be verified by the user prior to following any recommendations contained herein. To verify that you have the most current edition of the document, access the Gypsum Association website at: www.gypsum.org.