DL T 1367-2014 架空输电线路检测技术导则.pdf
《DL T 1367-2014 架空输电线路检测技术导则.pdf》由会员分享，可在线阅读，更多相关《DL T 1367-2014 架空输电线路检测技术导则.pdf（58页珍藏版）》请在麦多课文档分享上搜索。
本标准规定了架空输电线路运行中常用的各类检测项目的基本要求、检测周期、检测内容、检测方法和检测仪器等。本标准适用于交流66kV750kV架空输电线路的各种检测工作。直流架空输电线路、特高压架空输电线路的检测工作可参考采用。
下载提示：本站仅提供存储空间/不修改/不编辑
- 1.请仔细阅读文档，确保文档完整性，对于不预览、不比对内容而直接下载带来的问题本站不予受理。
- 2.下载的文档，不会出现我们的网址水印。
- 3、该文档所得收入（下载+内容+预览）归上传者、原创作者；如果您是本文档原作者，请点此认领！既往收益都归您。
文档包含非法信息？点此举报后获取现金奖励！
下载文档到电脑，查找使用更方便
5000 积分 1人已下载
| 下载 | 加入VIP,交流精品资源 |
还剩页未读，继续阅读
- 配套讲稿：
如PPT文件的首页显示word图标，表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制：
部分文档作品中含有的国旗、国徽等图片，仅作为作品整体效果示例展示，禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词：
- DL 1367 2014 架空 输电 线路 检测 技术
麦多课文档分享所有资源均是用户自行上传分享，仅供网友学习交流，未经上传用户书面授权，请勿作他用。
该用户的其他资源 更多>>
(EU) No 252-2011 关于评估物质和准备化学品安全报告的一般规定.pdf
-
ANSI ANSLG C78.43-2007 For Electric Lamps-Single-Ended Metal Halide Lamps.pdf
-
ANSI C78.1376-1996 For Electric Lamps-1000-Watt M47 Single Ended Metal- Halide Lamps.pdf
-
ANSI C78.1406-2004 电灯 灯头向下单触点中聚焦投影灯 规格.pdf
-
ANSI C78.20-2003 电灯 带E26中等螺纹的类似形状的交流白炽灯的特性.pdf
-
ANSI C78.380-2005 高强度放电灯 名称与符号法.pdf
-
ANSI C78.5-2003 电灯 自镇流荧光灯 性能指南.pdf
-
ANSI IEC C78.62035-2004 放电灯(不包括荧光灯).安全规范.pdf
-
ANSI-ISA-S88.01-1995 Batch Control Part 1 Models and Terminology.PDF
-
AS 1289.3.3.2-2009 Methods of testing soils for engineering purposes Method 3.3.2 Soil classification tests — Calculation of the cone plasticity index of a soil.pdf
-
AS 1816.4-2007 Metallic materials—Brinell hardness test Method 4 Table of hardness values.pdf
-
AS 3653-1993 Boilers―Safety, management, combustion and other ancillary equipment.pdf
-
2011 37 EU 汽车回收再利用政策.pdf
-
GOST 15588-1986 中文版 聚苯乙烯泡沫塑料板.pdf
-
GOST 5742-1976 中文版 多孔混凝土保温制品.pdf
-
IEEE Std 1801-2009 Design and Verification of Low Power Integrated Circuits.pdf
-
JASO B002-1989 英文版 标牌质量.pdf
-
JASO B301-1989 英文版 乘用车燃料系统安全试验规程.pdf
-
JASO B803-1995 英文版 汽车驱动轴词汇.pdf
-
JASO C206-1993 英文版 汽车动力输出机构箱的双层外壳及壳间间隙.pdf
-
JASO C448-1980 乘用车——钳盘式制动器台架试验规程.pdf
-
JASO C712-1982 英文版 动力转向泵性能台架试验规程.pdf
-
JASO D609-1990 中文版 低压汽车电线载流量标准.pdf
-
JASO D902-1995 汽车电子设备的耐用性测试方法.pdf
-
JASO M101-1994 中文版 汽车金属管.pdf
-
JIS A 5209-2010 瓷砖(修改件1).pdf
-
JIS A1109-2006 Methods of test for density and water absorption of fine aggregates.pdf
-
JIS A1132-2006 Method of making and curing concrete specimens.pdf
-
JIS A1146-2001 用灰浆棒法测试集料碱硅反应性的试验方法.pdf
-
JIS A1153-2003 Method of accelerated carbonation test for concrete.pdf
-
JIS A1191-2004 Test method for tensile properties of fiber reinforced polymer(FRP) sheets for reinforcement of concrete.pdf
-
JIS A1203-2009 土壤含水量的试验方法.pdf
猜你喜欢
-
ANSI P802.16G D5-2006 Draft IEEE Standard for Local and metropolitan area networks Part 16 Air Interface for Fixed and Mobile Broadband Wireless Access Systems - Management Plane P.pdf
-
ANSI P802.16K D3-2006 Draft Standard for Local and Metropolitan Area Networks Media Access Control (MAC) Bridges Amendment 2 Bridging of IEEE 802.16 TM《局域网和城域网用标准草案 媒体访问控制(MAC)电桥.修.pdf
-
ANSI P802.1Q D5.0-2005 Draft Standard for Local and Metropolitan Area Networks— Virtual Bridged Local Area Networks — Revision《局域网和城域网用标准草案.虚拟桥接局域网.修订本》.pdf
-
ANSI PAC-1-2015 Portable Air Conditioners.pdf
-
ANSI PAP.1-2012 Security Management Standard Physical Asset Protection.pdf
-
ANSI PB70-2012 Liquid barrier performance and classification of protective apparel and drapes intended for use in health care facilities (FDA RECOGNIZED).pdf
-
ANSI PC63.19 D3.17-2006 American National Standard for Methods of Measurement of Compatibility between Wireless Communications Devices and Hearing Aids《无线通信装置和助听器间兼容性的测量方法用美国国家标准》.pdf
-
ANSI PIA B151.1-2017 Plastics Machinery Safety Requirements for Injection Molding Machines (Plastics Industry Association FKA Society of the Plastics Industry Standards (SPI)).pdf
-
ANSI PIA B151.15-2003 Plastics Machinery - Extrusion Blow Molding Machines - Safety Requirements for Manufacture Care and Use (Plastics Industry Association FKA Society of the Plas.pdf
-
ANSI PIA B151.2-1999 Plastic Film Casting Machinery - Manufacture Care and Use (Plastics Industry Association FKA Society of the Plastics Industry Standards (SPI)).pdf
-
ANSI PIA B151.20-2013 Safety Requirements for Plastic Sheet Production Machinery (Plastics Industry Association FKA Society of the Plastics Industry Standards (SPI)).pdf
-
ANSI PIA B151.27-2013 Plastics Machinery Safety Requirements for the Integration of Robots with Injection Molding Machines (Plastics Industry Association FKA Society of the Plastic.pdf
-
ANSI PIA B151.29-2014 Safety Requirements for Vertical Clamp Injection Molding Machines (Plastics Industry Association FKA Society of the Plastics Industry Standards (SPI)).pdf
-
ANSI PIA B151.4-1999 Plastic Blown Film Machinery - Manufacture Care & Use (Plastics Industry Association FKA Society of the Plastics Industry Standards (SPI)).pdf
-
ANSI PSC.1-2012 Management System for Quality of Private Security Company Operations CRequirements with Guidance.pdf
-
ANSI PSC.2-2012 Conformity Assessment and Auditing Management Systems for Quality of Private Security Company Operations.pdf
-
ANSI PSC.3-2013 Maturity Model for the Phased Implementation of a Quality Assurance Management System for Private Security Service Providers.pdf
-
ANSI PSC.4-2013 Quality Assurance and Security Management for Private Security Companies OPerating At Sea-Guidance.pdf
-
ANSI PWF-2015 PERMANENT WOOD FOUNDATION DESIGN SPECIFICATION WITH COMMENTARY.pdf
关于本文
相关资源
更多
DL T 371-2010 架空输电线路放线滑车.pdf
DL T 1006-2006 架空输电线路巡检系统.pdf
DL T 741-2010 架空输电线路运行规程.pdf
DL T 1372-2014 架空输电线路跳线技术条件.pdf
DL T 741-2019 架空输电线路运行规程.pdf
DL T 5509-2015 架空输电线路覆冰勘测规程.pdf
DL T 1248-2013 架空输电线路状态检修导则.pdf
DL T 1248-2013 架空输电线路状态检修导则.pdf
Q GDW 11333-2014 架空输电线路岩石基础技术规定.pdf
DL T 5509-2015 架空输电线路覆冰勘测规程.pdf
