BS EN 62133-2003含碱性或其它非酸性电解液的副电池和蓄电池.便携式密封副电池和由它们制成的便携式蓄电池的安全要.pdf

《BS EN 62133-2003含碱性或其它非酸性电解液的副电池和蓄电池.便携式密封副电池和由它们制成的便携式蓄电池的安全要.pdf》由会员分享，可在线阅读，更多相关《BS EN 62133-2003含碱性或其它非酸性电解液的副电池和蓄电池.便携式密封副电池和由它们制成的便携式蓄电池的安全要.pdf（24页珍藏版）》请在麦多课文档分享上搜索。

1、BRITISH STANDARD BS EN 62133:2003 Secondary cells and batteries containing alkaline or other non-acid electrolytes Safety requirements for portable sealed secondary cells, and for batteries made from them, for use in portable applications The European Standard EN 62133:2003 has the status of a Briti

2、sh Standard ICS29.220.30 BS EN 62133:2003 This British Standard was published under the authority of the Standards Policy and Strategy Committee on 1 July 2003 BSI 1 July 2003 ISBN 0 580 42139 2 National foreword This British Standard is the official English language version of EN 62133:2003. It is

3、identical with IEC 62133:2002. It supersedes BS EN 61809:2001 which will be withdrawn on 2005-12-01. It also partially supersedes BS EN 61960-1:2001 and BS EN 61960-2:2002, both of which will be replaced by BS EN 61960 Ed. 1, which is currently under development and will not contain subjects now cov

4、ered by this BS EN 62133. The UK participation in its preparation was entrusted to Technical Committee PEL/21/1, Secondary cells and batteries containing alkaline and other non-acidic electrolytes, which has the responsibility to: A list of organizations represented on this committee can be obtained

5、 on request to its secretary. Cross-references The British Standards which implement international or European publications referred to in this document may be found in the BSI Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Search” facility of t

6、he BSI Electronic Catalogue or of British Standards Online. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. aid en

7、quirers to understand the text; present to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep the UK interests informed; monitor related international and European developments and promulgate them in the UK. Summary of pages This d

8、ocument comprises a front cover, an inside front cover, the EN title page, pages 2 to 20, an inside back cover and a back cover. The BSI copyright date displayed in this document indicates when the document was last issued. Amendments issued since publication Amd. No. Date CommentsEUROPEAN STANDARD

9、EN 62133 NORME EUROPENNE EUROPISCHE NORM April 2003 CENELEC European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung Central Secretariat: rue de Stassart 35, B - 1050 Brussels 2003 CENELEC - All rights of

10、 exploitation in any form and by any means reserved worldwide for CENELEC members. Ref. No. EN 62133:2003 E ICS 29.220.30 Supersedes EN 61809:2000; partially supersedes EN 61960-1:2001 and EN 61960-2:2001English version Secondary cells and batteries containing alkaline or other non-acid elecrolytes

11、- Safety requirements for portable sealed secondary cells, and for batteries made from them, for use in portable applications (IEC 62133:2002) Accumulateurs alcalins et autres accumulateurs lectrolyte non acide - Exigences de scurit pour les accumulateurs portables tanches, et pour les batteries qui

12、 en sont constitues, destins lutilisation dans des applications portables (CEI 62133:2002) Akkumulatoren und Batterien mit alkalischem oder anderen nicht surehaltigen Elektrolyten - Sicherheitsanforderungen fr tragbare gasdichte Akkumulatoren und daraus hergestellte Batterien fr die Verwendung in tr

13、agbaren Gerten (IEC 62133:2002) This European Standard was approved by CENELEC on 2002-12-03. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to

14、-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation un

15、der the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Hungary,

16、 Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and United Kingdom. Foreword The text of document 21A/363/FDIS, future edition 1 of IEC 62133, prepared by SC 21A, Secondary cells and batteries containing alkaline or other non-acid elec

17、trolytes, of IEC TC 21, Secondary cells and batteries, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as EN 62133 on 2002-12-03. This European Standard supersedes EN 61809:2000 and partially supersedes EN 61960-1:2001 and EN 61960-2:2001. The following dates were fixed: l

18、atest date by which the EN has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2003-11-01 latest date by which the national standards conflicting with the EN have to be withdrawn (dow) 2005-12-01 Annexes designated “normative“ are part of

19、the body of the standard. Annexes designated “informative“ are given for information only. In this standard, annex ZA is normative and annexes A and B are informative. Annex ZA has been added by CENELEC. _ Endorsement notice The text of the International Standard IEC 62133:2002 was approved by CENEL

20、EC as a European Standard without any modification. In the official version, for Bibliography, the following notes have to be added for the standards indicated: IEC 60664 NOTE Harmonized as EN 60664 series (not modified). IEC 61434 NOTE Harmonized as EN 61434:1996 (not modified). _ Page2 EN62133:200

21、3 CONTENTS 1 General4 1.1 Scope4 1.2 Normative references4 1.3 Definitions.5 1.4 Parameter measurement tolerances6 2 General safety considerations 6 2.1 Insulation and wiring.7 2.2 Venting7 2.3 Temperature/current management.7 2.4 Terminal contacts7 2.5 Assembly of cells into batteries .7 2.6 Qualit

22、y plan.8 3 Type test conditions.8 4 Specific requirements and tests8 4.1 Charging procedure for test purposes8 4.2 Intended use.9 4.2.1 Continuous low-rate charging9 4.2.2 Vibration9 4.2.3 Moulded case stress at high ambient temperature .10 4.2.4 Temperature cycling10 4.3 Reasonably foreseeable misu

23、se11 4.3.1 Incorrect installation of a cell (nickel systems only)11 4.3.2 External short circuit11 4.3.3 Free fall.12 4.3.4 Mechanical shock (crash hazard).12 4.3.5 Thermal abuse12 4.3.6 Crushing of cells12 4.3.7 Low pressure.13 4.3.8 Overcharge for nickel systems.13 4.3.9 Overcharge for lithium sys

24、tems .13 4.3.10 Forced discharge.14 4.3.11 Cell protection against a high charging rate (lithium systems only) 14 5 Information for safety14 6 Marking14 6.1 Cell marking14 6.2 Battery marking.15 6.3 Other information15 7 Packaging15 Annex A (informative) Recommendations to equipment manufacturers an

25、d battery assemblers .16 Annex B (informative) Recommendations to the end-users .17 Annex ZA (normative) Normative references to international publications with their corrsponding European publications.18 Bibliography20 Page3 EN62133:2003 SECONDARY CELLS AND BATTERIES CONTAINING ALKALINE OR OTHER NO

26、N-ACID ELECTROLYTES SAFETY REQUIREMENTS FOR PORTABLE SEALED SECONDARY CELLS, AND FOR BATTERIES MADE FROM THEM, FOR USE IN PORTABLE APPLICATIONS 1 General 1.1 Scope This International Standard specifies requirements and tests for the safe operation of portable sealed secondary cells and batteries (ot

27、her than button) containing alkaline or other non-acid electrolyte, under intended use and reasonably foreseeable misuse. 1.2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For unda

28、ted references, the latest edition of the referenced document (including any amendments) applies. IEC 60050-486, International Electrotechnical Vocabulary Chapter 486: Secondary cells and batteries IEC 60051 (all parts), Direct acting indicating analogue electrical measuring instruments and their ac

29、cessories IEC 60285, Alkaline secondary cells and batteries Sealed nickel-cadmium cylindrical rechargeable single cells IEC 60485, Digital electronic d.c. voltmeters and d.c. electronic analogue-to-digital converters IEC 61436, Secondary cells and batteries containing alkaline or other non-acid elec

30、trolytes Sealed nickel-metal hydride rechargeable single cells IEC 61438, Possible safety and health hazards in the use of alkaline secondary cells and batteries Guide to equipment manufacturers and users IEC 61440, Secondary cells and batteries containing alkaline or other non-acid electrolytes Sea

31、led nickel-cadmium small prismatic rechargeable single cells IEC 61951-1, Secondary cells and batteries containing alkaline or other non-acid electrolytes Portable sealed rechargeable single cells Part 1: Nickel-cadmium IEC 61951-2, Secondary cells and batteries containing alkaline or other non-acid

32、 electrolytes Portable sealed rechargeable single cells Part 2: Nickel-metal hydride IEC 61960, Secondary cells and batteries containing alkaline or other non-acid electrolytes Secondary lithium cells and batteries for portable applications 1ISO/IEC Guide 51, Safety aspects Guidelines for their incl

33、usion in standards _ 1To be published. Page4 EN62133:2003 1.3 Definitions For the purpose of this international standard, the definitions contained in IEC 60050-486 and ISO/IEC Guide 51 as well as the following definitions apply. 1.3.1 safety freedom from unacceptable risk 1.3.2 risk a combination o

34、f the probability of occurrence of harm and the severity of that harm 1.3.3 harm physical injury or damage to the health of people or damage to property or to the environment 1.3.4 hazard potential source of harm 1.3.5 intended use use of a product, process or service in accordance with specificatio

35、ns, instructions and information provided by the supplier 1.3.6 reasonably foreseeable misuse use of a product, process or service in a way which is not intended by the supplier, but which may result from readily predictable human behaviour 1.3.7 secondary cell basic manufactured unit providing a so

36、urce of electrical energy by direct conversion of chemical energy, that consists of electrodes, separators, electrolyte, container and terminals, and that is designed to be charged electrically 1.3.8 secondary battery assembly of secondary cell(s) ready for use as a source of electrical energy chara

37、cterized by its voltage, size, terminal arrangement, capacity and rate capability 1.3.9 leakage visible escape of liquid electrolyte 1.3.10 venting release of excessive internal pressure from a cell/battery in a manner intended by design to preclude rupture or explosion 1.3.11 rupture mechanical fai

38、lure of a cell container or battery case induced by an internal or external cause, resulting in exposure or spillage but not ejection of materials Page5 EN62133:2003 1.3.12 explosion failure that occurs when a cell container or battery case opens violently and major components are forcibly expelled

39、1.3.13 fire the emission of flames from a cell or battery 1.3.14 portable battery a battery for use in a device or appliance which is conveniently hand carried 1.3.15 portable cell a cell intended for assembly in a portable battery 1.3.16 rated capacity quantity of electricity C 5 Ah (ampere-hours)

40、declared by the manufacturer which a single cell can deliver when discharged at the reference test current of 0,2 I tA to a specified final voltage, after charging, storing and discharging under specified conditions 1.4 Parameter measurement tolerances The overall accuracy of controlled or measured

41、values, relative to the specified or actual parameters, shall be within these tolerances. a) 1 % for voltage; b) 1 % for current; c) 2 C for temperature; d) 0,1 % for time; e) 1 % for dimension; f) 1 % for capacity. These tolerances comprise the combined accuracy of the measuring instruments, the me

42、asurement techniques used, and all other sources of error in the test procedure. For assistance in selecting instrumentation see IEC 60051 for analogue instruments and IEC 60485 for digital instruments. The details of the instrumentation used shall be provided in any report of results. 2 General saf

43、ety considerations The safety of secondary cells and batteries requires the consideration of two sets of applied conditions: a) intended use; b) reasonably foreseeable misuse. Cells and batteries shall be so designed and constructed that they are safe under conditions of both intended use and reason

44、ably foreseeable misuse. It is expected that cells or batteries subjected to misuse may fail to function following such experience. They shall not however present significant hazards. It may also be expected that cells and batteries subjected to intended use shall not only be safe but shall continue

45、 to be functional in all respects. Page6 EN62133:2003 Potential hazards which are the subject of this standard are: a) fire, b) burst/explosion, c) leakage of cell electrolyte, d) venting, e) burns from excessively high external temperatures, f) rupture of battery case with exposure of internal comp

46、onents. Conformity with 2.1 to 2.6 is checked by inspection, by the tests of clause 4, and in accordance with the appropriate standard (see 1.2). 2.1 Insulation and wiring The insulation resistance between the positive terminal and externally exposed metal surfaces of the battery excluding electrica

47、l contact surfaces shall be not less than 5 M at 500 V d.c. Internal wiring and its insulation shall be sufficient to withstand the maximum anticipated current, voltage and temperature requirements. The orientation of wiring shall be such that adequate clearances and creepage distances are maintaine

48、d between connectors. The mechanical integrity of internal connections shall be sufficient to accommodate conditions of reasonably foreseeable misuse. 2.2 Venting Battery cases and cells shall incorporate a pressure relief mechanism or shall be so constructed that they will relieve excessive interna

49、l pressure at a value and rate that will preclude rupture, explosion and self-ignition. If encapsulation is used to support cells within an outer case, the type of encapsulant and the method of encapsulation shall neither cause the battery to overheat during normal operation nor inhibit pressure relief. 2.3 Temperature/current management The design of batteries shall be such that abnormal temperature-rise condit