UL SUBJECT 2586C-2014 UL Outline for Investigation Hose Nozzle Valves for Diesel Exhaust Fluid (Issue 2)《用于柴油机排液的软管喷嘴阀的UL调查大纲 (议题2)》.pdf

《UL SUBJECT 2586C-2014 UL Outline for Investigation Hose Nozzle Valves for Diesel Exhaust Fluid (Issue 2)《用于柴油机排液的软管喷嘴阀的UL调查大纲 (议题2)》.pdf》由会员分享，可在线阅读，更多相关《UL SUBJECT 2586C-2014 UL Outline for Investigation Hose Nozzle Valves for Diesel Exhaust Fluid (Issue 2)《用于柴油机排液的软管喷嘴阀的UL调查大纲 (议题2)》.pdf（30页珍藏版）》请在麦多课文档分享上搜索。

1、UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION ORDISTRIBUTION WITHOUT PERMISSION FROM ULOctober 8, 20141UL 2586COutline of Investigation for Hose Nozzle Valves for Diesel Exhaust FluidIssue Number: 2October 8, 2014Summary of TopicsThis second issue of the Outline of Investigation fo

2、r Hose Nozzle Valvesfor Diesel Exhaust Fluid clarifies the secondary shut off operation in15.2.1 and 19.1. Paragraph 17.1 was revised to clarify the sensitivity test.This outline is effective April 30, 2015. Prior to the effective date, therequirements for products covered in this outline are includ

3、ed in the ninthedition of the Standard for Valves for Flammable Fluids, UL 842.ULs Outlines of Investigation are copyrighted by UL. Neither a printed norelectronic copy of an Outline of Investigation should be altered in any way. All ofULs Outlines of Investigation and all copyrights, ownerships, an

4、d rights regardingthose Outlines of Investigation shall remain the sole and exclusive property of UL.COPYRIGHT 2014 UNDERWRITERS LABORATORIES INC.UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION ORDISTRIBUTION WITHOUT PERMISSION FROM ULOCTOBER 8, 2014UL 2586C2No Text on This PageUL CO

5、PYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION ORDISTRIBUTION WITHOUT PERMISSION FROM ULCONTENTSINTRODUCTION1 Scope .52 General 62.1 Components .62.2 Units of measurement .62.3 Undated references .63 Glossary .7CONSTRUCTION4 Assembly 74.1 General .74.2 Hose nozzle valves .85 Materials .9

6、5.1 Metallic materials .95.2 Nonmetallic materials 125.3 Casting impregnation materials 145.4 Internal parts .146 Bodies and Covers .147 Diaphragms 158 Springs .159 Operating Mechanisms .15PERFORMANCE10 General 1511 Deformation Test .1612 Long Term Exposure Test .1712.1 General .1712.2 Samples 1712.

7、3 Method .1812.4 Results .1813 External Leakage Test 1914 Hose Nozzle Valve Guard Strength Test .2015 Operation Test .2115.1 Automatic hose nozzle valve .2115.2 Bellows Secondary shut off operation .2216 Pull Test .2217 Sensitivity Test .2218 Hose Nozzle Endurance Test 2319 Bellows Secondary Shut Of

8、f Operation Test .2320 Visible Discharge Indicator Tests .2320.1 Thermal shock test .2320.2 Drop test 2421 Hydrostatic Strength Test 2422 Salt Spray Test .2423 Moist Ammonia-Air Stress Cracking Test 2524 Marking Adhesion Test 26OCTOBER 8, 2014 UL 2586C 3UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FUR

9、THER REPRODUCTION ORDISTRIBUTION WITHOUT PERMISSION FROM ULMANUFACTURING AND PRODUCTION TESTS25 General 26INSTALLATION INSTRUCTIONS26 General 27MARKING27 General 27SUPPLEMENT SA - Test FluidSA.1 Details .SA1OCTOBER 8, 2014UL 2586C4UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION ORDIS

10、TRIBUTION WITHOUT PERMISSION FROM ULINTRODUCTION1 Scope1 effective April 30, 20151.1 These requirements cover hose nozzle valves that are intended to be used for the control of DieselExhaust Fluid (DEF). Hose nozzle valves covered by this outline are for use with DEF which are handledat temperatures

11、 within the range of minus 20C (minus 4F) to 52C (125F) and an operating pressureof minimum 50 psi (350 kPa).1.2 Hose nozzle valves covered by these requirements are intended for use with DEF defined as a liquidwith 67.5 percent deionized water and 32.5 percent urea.1.3 These requirements cover hose

12、 nozzle valves of the manually operated and automatic pressureoperated type.When they form a part of an assembly which provides for additional functions or service, the requirementsare outside the scope of these requirements.1.4 These requirements do not cover the following:a) Hose nozzle valves for

13、 handling liquids under cryogenic conditions.b) Hose nozzle valves for flammable liquids, general refinery service, offshore and pipe lineterminals, natural gas processing plants, gas distribution systems, petrochemical processingfacilities, or the like.c) Hose nozzle valves operated wholly or parti

14、ally by electricity or battery.1.5 This outline does not cover hose nozzle valves for use with gasoline or gasoline/ethanol blends whichare covered under the Outline of Investigation for Hose Nozzle Valves for Gasoline and Gasoline/EthanolBlends with Nominal Ethanol Concentrations up to 85 Percent (

15、E0 E85), UL 2586A or Outline ofInvestigation for Hose Nozzle Valves for Diesel Fuel, Biodiesel Fuel, Diesel/Biodiesel Blends with NominalBiodiesel Concentrations up to 20 Percent (B20), Kerosene, and Fuel Oil, UL 2586B.1.6 This outline does not cover hose nozzle valves for use with liquefied petrole

16、um gas (LP-Gas), whichare covered under the Standard for Flow Control Valves for Anhydrous Ammonia and LP-Gas, UL 125.1.7 Requirements for the installation and use of these dispensing devices are included in the Code forMotor Fuel Dispensing Facilities and Repair Garages, NFPA 30A.OCTOBER 8, 2014 UL

17、 2586C 5UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION ORDISTRIBUTION WITHOUT PERMISSION FROM UL2 General2 effective April 30, 20152.1 Components2.1.1 Except as indicated in 2.1.2, a component of a product covered by this outline shall comply with therequirements for that component.

18、2.1.2 A component is not required to comply with a specific requirement that:a) Involves a feature or characteristic not required in the application of the component in theproduct covered by this outline, orb) Is superseded by a requirement in this outline.2.1.3 A component shall be used in accordan

19、ce with its rating established for the intended conditions ofuse.2.1.4 Specific components are incomplete in construction features or restricted in performancecapabilities. Such components are intended for use only under limited conditions, such as certaintemperatures not exceeding specified limits,

20、 and shall be used only under those specific conditions.2.1.5 A hose nozzle valve with an integral swivel shall be additionally evaluated to the tests in the Outlineof Investigation for Power-Operated Dispensing Devices for Diesel Exhaust Fluid, UL 87C.2.2 Units of measurement2.2.1 When a value for

21、measurement is followed by a value in other units in parentheses, the first statedvalue is the requirement.2.3 Undated references2.3.1 Any undated reference to a code or standard appearing in the requirements of this outline shall beinterpreted as referring to the latest edition of that code or stan

22、dard.OCTOBER 8, 2014UL 2586C6UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION ORDISTRIBUTION WITHOUT PERMISSION FROM UL3 Glossary3 effective April 30, 20153.1 For the purpose of this outline the following definitions apply.3.2 HOSE NOZZLE VALVE, AUTOMATIC A hose nozzle valve which is

23、held open during the entirefilling operation. It may be held open by manual force or by an integral hold-open or latching device. Itincorporates a mechanism that shuts off the flow of liquid during refueling operations to preventoverflow from the fill opening when liquid reaches a predetermined poin

24、t on the spout.3.3 HOSE NOZZLE VALVES A self-closing device designed to control the flow of flammable andcombustible liquids at an operating pressure of minimum 50 psi (345 kPa). It is intended for use at theoutlet end of a hose for dispensing flammable liquids.3.4 HOSE NOZZLE VALVE, MANUALLY OPERAT

25、ED A hose nozzle valve that is manually heldopen during the entire filling operation and closes only upon release of the manual force.3.5 SEALS, DYNAMIC A seal that is subject to mechanical movement or other applied forces thatresult in movement or flexing of the seal under normal use conditions.3.6

26、 SEALS, STATIC A seal that is not subject to mechanical movement or other applied forces otherthan compressing forces that are applied during installation, after which, the seal is held in place duringnormal use conditions.CONSTRUCTION4 Assembly4 effective April 30, 20154.1 General4.1.1 A hose nozzl

27、e valve shall include all of the components required for its intended function andinstallation.4.1.2 A seat disc shall be attached to its poppet or holder or otherwise assembled so as to prevent it frombecoming dislocated under service conditions as determined by the Hose Nozzle Endurance Test, Sect

28、ion18. The means to secure the disc shall not rely upon cement or adhesive.OCTOBER 8, 2014 UL 2586C 7UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION ORDISTRIBUTION WITHOUT PERMISSION FROM UL4.2 Hose nozzle valves4.2.1 A hose nozzle valve shall be of the manually-operated or of the au

29、tomatic type. Amanually-operated valve requires the valve to be manually held open during the entire filling operationwithout the aid of hold-open devices or latches, but is capable of closing automatically. An automatic valverequires the valve to:a) Be manually opened, but is capable of being held

30、open during the filling operation by a latchor other device, andb) Is provided with automatic closing features.Exception: A hose nozzle valve for use in salt water or boat yard environments shall be of the automaticclosing type without a latch-open device.4.2.2 Automatic hose nozzle valves equipped

31、with an integral hold open or latching device shall be sodesigned that, if left in the latched position after the flow has been stopped by means other than theautomatic feature of the hose nozzle, it shall automatically unlatch when it is returned to the dispenser,See Automatic hose nozzle valve, 15

32、.1.2.NOTE: This includes hose nozzle valves that close with a no pressure/no flow mechanism, as well asinterlock hose nozzles valves that unlatch when removed from car fill pipe or when hung on the dispenser.4.2.3 A hose nozzle valve shall be of the normally closed type. It shall be self-closing upo

33、n the manualor automatic release of the operating lever.4.2.4 A guard shall be provided to guide or protect the free end of an operating lever and to preventopening of the valve or damage to an operating part if the valve is dropped. A guard shall be of suchstrength as to permit operation of the val

34、ve subsequent to its being subjected to mechanical strengthtests. See the Hose Nozzle Valve Guard Strength Test, Section 14.4.2.5 An operating lever shall possess the strength required to resist bending or breaking when tested inaccordance with these requirements. See the Hose Nozzle Endurance Test,

35、 Section 18.4.2.6 The closing action of a hose nozzle valve shall be in the direction of fluid flow. A seat seal or valvedisc shall consist of resilient material and shall provide proper seating of a disc.4.2.7 A hose nozzle valve shall be equipped with a spout not exceeding 12 inches (305 mm) in le

36、ngth.Nozzles shall be of corrosion resistant material, such as brass, aluminum, or stainless steel.4.2.8 A sand casting employed as a pressure confining part of a hose nozzle valve shall have a wallthickness of minimum 0.094 inch (2.38 mm).4.2.9 The means for attaching a spout to an automatic valve

37、body shall permit ready replacement of aspout with the use of ordinary hand tools.OCTOBER 8, 2014UL 2586C8UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION ORDISTRIBUTION WITHOUT PERMISSION FROM UL4.2.10 A hose nozzle valve intended for use in salt water marine or boat yard environment

38、s shall beconstructed so as to comply with the applicable construction and performance requirements except thatthe tests specified in Sections 14, 15, 17, and 21 are to be conducted following exposure to a salt enrichedatmosphere as described in 22.2 22.6.Exception: A hose nozzle valve is not requir

39、ed to operate in accordance with the requirements of Section15 when, due to accumulation of salt in the sensing port, the hose nozzle valve does not operate to deliverfluid.5 Materials5 effective April 30, 20155.1 Metallic materials5.1.1 General5.1.1.1 A metallic part, in contact with the fluid anti

40、cipated by these requirements, shall be resistant to theaction of the fluid if degradation of the material will result in leakage of the fuel or if it will impair thefunction of the device. See the Long Term Exposure Test, Section 12.5.1.1.2 The exposed surfaces of metallic parts shall be resistant

41、to atmospheric corrosion if this corrosionwill lead to leakage of the fluid or if it will impair the function of the device. The material shall comply withthe requirements in Atmospheric corrosion, 5.1.2. A hose nozzle valve intended for use in salt watermarine or boat yard environments shall be res

42、istant to corrosion so as to comply with the requirements ofthe Salt Spray Test, Section 22.5.1.1.3 Metallic parts in contact with the fluid anticipated by these requirements shall not be constructedof lead, or materials that are substantially lead. In addition, no coatings or platings containing le

43、ad shallbe used, such as terne-plated steel.5.1.1.4 With reference to the above requirements, metallic parts include metallic materials used to formfluid confining parts as well as metallic coatings or plating that may be applied to a base material.5.1.2 Atmospheric corrosion5.1.2.1 Metallic materia

44、ls used for fluid confining parts shall be resistant to atmospheric corrosion. Inaddition, metallic materials that are required to operate to address safety shall be resistant to atmosphericcorrosion. Ferrous materials of a thickness specified in the following items are acceptable for thepreceding w

45、hen uncoated:a) A casting having a wall thickness of not less than 1/4 inch (6.4 mm) if shown by productiontest to be free of leakage;b) Standard pipe and fittings conforming to the Standard for Welded and Seamless WroughtSteel Pipe, ANSI/ASME B36.10M; andc) Fabricated sheet steel parts having a min

46、imum wall thickness of 0.093 inch (2.36 mm).OCTOBER 8, 2014 UL 2586C 9UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION ORDISTRIBUTION WITHOUT PERMISSION FROM UL5.1.2.2 A protective coating shall provide resistance against atmospheric corrosion to a degree not lessthan that provided by

47、 the protective coatings specified in 5.1.2.3.5.1.2.3 Cadmium plating shall not be less than 0.0003 inch (0.008 mm) thick, and zinc plating shall notbe less than 0.0005 inch (0.013 mm) thick, except on parts where threads constitute the major portion ofthe area in which case the cadmium or zinc plat

48、ing shall not be less than 0.00015 inch (0.0038 mm) thick.Metallic parts are considered to comply with 5.1.2.1 when they are protected against atmosphericcorrosion by:a) Hot dipped, mill galvanized sheet steel complying with the coating designation G90 in TableI of the Specification for Sheet Steel,

49、 Zinc Coated (Galvanized) or Zinc-Iron-Alloy Coated(Galvannealed) by the Hot Dip Process, ASTM A653/A653M; orb) Coatings which have been determined to be equivalent to G90 under the requirements ofthe Standard for Organic Coatings for Steel Enclosures for Outdoor Use Electrical Equipment,UL 1332.5.1.2.4 A metallic material other than as described in 5.1.2.1 5.1.2.3 shall be painted or protected in amanner that has been determined to be equivalent.5.1.3 Metallic materials system level5.1.3.1 Combinations of metallic materials shall be chosen to reduce degrada