UL 62841-2-2-2016 UL Standard for Safety Electric Motor-Operated Hand-Held Tools Transportable Tools And Lawn And Garden Machinery C Safety C Part 2-2 Particular Requirements For H.pdf

《UL 62841-2-2-2016 UL Standard for Safety Electric Motor-Operated Hand-Held Tools Transportable Tools And Lawn And Garden Machinery C Safety C Part 2-2 Particular Requirements For H.pdf》由会员分享，可在线阅读，更多相关《UL 62841-2-2-2016 UL Standard for Safety Electric Motor-Operated Hand-Held Tools Transportable Tools And Lawn And Garden Machinery C Safety C Part 2-2 Particular Requirements For H.pdf（28页珍藏版）》请在麦多课文档分享上搜索。

1、UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL UL 62841-22 Electric Motor-Operated Hand-Held Tools, Transportable Tools And Lawn And Garden Machinery Safety Part 2-2: Particular Requirements For Hand-Held Screwdrivers And Impact Wrenches ST

2、ANDARD FOR SAFETYUL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM ULUL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL UL Standard for Safety for Electric Motor-Operated Hand-Held Tools, Tr

3、ansportable Tools And Lawn And Garden Machinery Safety Part 2-2: Particular Requirements For Hand-Held Screwdrivers And Impact Wrenches, UL 62841-2-2 First Edition, Dated February 26, 2016 Summary of Topics Adoption Of The First Edition Of IEC 62841-2-2, Standard for Electric Motor-Operated Hand-Hel

4、d Tools, Transportable Tools And Lawn And Garden Machinery Safety Part 2-2: Particular Requirements For Hand-Held Screwdrivers And Impact Wrenches as the First Edition of UL 62841-2-2 Please note that the national difference document incorporates all of the U.S. national differences for UL 60745-2-2

5、 including the new national differences itemized below. This standard is an adoption of IEC UL 62841-2-2, Edition 1 published by the IEC, May 2014. 1. Clause 1DV was added to include a specic reference to ratchet drivers in the scope of the standard. 2. Clauses 3.103DV, 12.2.1DV, 12.5DV, 17.2DV.1, 1

6、7.2DV.2, 17.2DV.3, 20.5DV, 21.30DV, 24.4DV, and K.12.1DV was added to dene a ratchet driver, and clarify existing IEC construction and testing requirements as they apply to ratchet drivers. The new requirements are substantially in accordance with Proposal(s) on this subject dated October 23, 2015.

7、All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form by any means, electronic, mechanical photocopying, recording, or otherwise without prior permission of UL. UL provides this Standard as is without warranty of any kind, either

8、 expressed or implied, including but not limited to, the implied warranties of merchantability or tness for any purpose. In no event will UL be liable for any special, incidental, consequential, indirect or similar damages, including loss of prots, lost savings, loss of data, or any other damages ar

9、ising out of the use of or the inability to use this Standard, even if UL or an authorized UL representative has been advised of the possibility of such damage. In no event shall ULs liability for any damage ever exceed the price paid for this Standard, regardless of the form of the claim. Users of

10、the electronic versions of ULs Standards for Safety agree to defend, indemnify, and hold UL harmless from and against any loss, expense, liability, damage, claim, or judgment (including reasonable attorneys fees) resulting from any error or deviation introduced while purchaser is storing an electron

11、ic Standard on the purchasers computer system. FEBRUARY 26, 2016 UL 62841-2-2 tr1UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL FEBRUARY 26, 2016 UL 62841-2-2 tr2 No Text on This PageUL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPROD

12、UCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL CSA Group CAN/CSA-C22.2 No. 62841-2-2:16 First Edition (IEC 62841-2-2:2014, MOD) Underwriters Laboratories Inc. UL 62841-2-2 First Edition Electric Motor-Operated Hand-Held Tools, Transportable Tools And Lawn And Garden Machinery Safety Part 2-2: Par

13、ticular Requirements For Hand-Held Screwdrivers And Impact Wrenches February 26, 2016 This national standard is based on publication IEC 62841-2-2, First Edition (2014). ANSI/UL 62841-2-2-2016 Approved byUL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSI

14、ON FROM UL Commitment for Amendments This standard is issued jointly by the Canadian Standards Association (operating as “CSA Group”) and Underwriters Laboratories Inc. (UL). Comments or proposals for revisions on any part of the standard may be submitted to CSA Group or UL at any time. Revisions to

15、 this standard will be made only after processing according to the standards development procedures of CSA Group and UL. CSA Group and UL will issue revisions to this standard by means of a new edition or revised or additional pages bearing their date of issue. ISBN 978-1-4883-0249-7 2016 CSA Group

16、All rights reserved. No part of this publication may be reproduced in any form whatsoever without the prior permission of the publisher. This Standard is subject to review ve years from the date of publication, and suggestions for its improvement will be referred to the appropriate committee. To sub

17、mit a proposal for change, please send the following information to inquirescsagroup.org and include Proposal for change in the subject line: Standard designation (number); relevant clause, table, and/or gure number; wording of the proposed change; and rationale for the change. To purchase CSA Group

18、 Standards and related publications, visit CSA Groups Online Store at shop.csa.ca or call toll-free 1-800-463-6727 or 416-747-4044. Copyright 2016 Underwriters Laboratories Inc. Comments or proposals for revisions on any part of the Standard may be submitted to UL at any time. Proposals should be su

19、bmitted via a Proposal Request in ULs On-Line Collaborative Standards Development System (CSDS) at http:/. This ANSI/UL Standard for Safety consists of the First Edition. The most recent designation of ANSI/UL 62841-2-2 as an American National Standard (ANSI) occurred on February 26, 2016. The ANSI

20、approval for this standard does not include the Cover Page, Transmittal Pages, Title Page, Preface Page, National Difference Page or IEC Foreword. Comments or proposals for revisions on any part of the Standard may be submitted to UL at any time. Proposals should be submitted via a Proposal Request

21、in ULs On-Line Collaborative Standards Development System (CSDS) at http:/. To purchase UL Standards, visit Comm 2000 at http:/m- or call toll-free 1-888-853-3503.UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL CONTENTS Preface .5 NATIONAL D

22、IFFERENCES .7 FOREWORD 8 1 Scope 11 2 Normative references .11 3 Terms and denitions 11 4 General requirements 12 5 General conditions for the tests 12 6 Radiation, toxicity and similar hazards 12 7 Classication 12 8 Marking and instructions 12 9 Protection against access to live parts 12 10 Startin

23、g 12 11 Input and current .12 12 Heating 13 13 Resistance to heat and re 13 14 Moisture resistance .13 15 Resistance to rusting 13 16 Overload protection of transformers and associated circuits 13 17 Endurance .14 18 Abnormal operation .15 19 Mechanical hazards .15 20 Mechanical strength .15 21 Cons

24、truction .16 22 Internal wiring 16 23 Components .16 24 Supply connection and external exible cords 16 25 Terminals for external conductors .16 26 Provision for earthing 16 27 Screws and connections .16 28 Creepage distances, clearances and distances through insulation 16 Annexes Annex I (informativ

25、e) Measurement of noise and vibration emissions I.2 Noise test code (grade 2) 18 I.2.4 Installation and mounting conditions of the power tools during noise tests .18 I.2.5 Operating conditions 18 I.3 Vibration .18 I.3.3.2 Location of measurement 18 I.3.5.3 Operating conditions 19 I.3.6.2 Declaration

26、 of the vibration total value .20 FEBRUARY 26, 2016 CAN/CSA-C22.2 NO. 62841-2-2:16 UL 62841-2-2 3UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL Annex K (normative) Battery tools and battery packs Bibliography FEBRUARY 26, 2016 CAN/CSA-C22.2

27、 NO. 62841-2-2:16 UL 62841-2-2 4UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL Preface This is the harmonized CSA Group and UL Standard For Electric Motor-Operated Hand-Held Tools, Transportable Tools And Lawn And Garden Machinery Safety Pa

28、rt 2-2: Particular Requirements For Hand-Held Screwdrivers And Impact Wrenches. It is the First edition of CAN/CSA-C22.2 No. 62841-2-2 and the First edition of UL 62841-2-2. This harmonized standard is based on IEC Publication 62841-2-2: First edition Electric Motor-Operated Hand-Held Tools, Transpo

29、rtable Tools And Lawn And Garden Machinery Safety Part 2-2: Particular Requirements For Hand-Held Screwdrivers And Impact Wrenches issued May 2014. IEC publication 62841-2-2 is copyrighted by the IEC. This harmonized standard was prepared by CSA Group and Underwriters Laboratories Inc. (UL). The eff

30、orts and support of the International Harmonization Committee (IHC) for the adoption of the IEC series of standards for Hand-Held, Motor-Operated, and Transportable Tools and Lawn and Garden Machinery UL are gratefully acknowledged. This standard is considered suitable for use for conformity assessm

31、ent within the stated scope of the standard. This standard was reviewed by the CSA Subcommittee on Safety of Hand-Held Motor-Operated Electric Tools, under the jurisdiction of the CSA Technical Committee on Consumer and Commercial Products and the CSA Strategic Steering Committee on Requirements for

32、 Electrical Safety, and has been formally approved by the CSA Technical Committee. This standard has been approved as a National Standard of Canada by the Standards Council of Canada (SCC). This standard has been approved by the American National Standards Institute (ANSI) as an American National St

33、andard. Application of Standard Where reference is made to a specic number of samples to be tested, the specied number is to be considered a minimum quantity. Note: Although the intended primary application of this standard is stated in its scope, it is important to note that it remains the responsi

34、bility of the users of the standard to judge its suitability for their particular purpose. This CAN/CSA-C22.2 No. 62841-2-2 Standard for Electric Motor-Operated Hand-Held Tools, Transportable Tools And Lawn And Garden Machinery Safety Part 2-2: Particular Requirements For Hand-Held Screwdrivers And

35、Impact Wrenches is to be used in conjunction with the First edition of CAN/CSA-C22.2 No. 62841-1. The requirements for hand-held screwdrivers and impact wrenches are contained in this Part 2 Standard and CAN/CSA-C22.2 No. 62841-1. Requirements of this Part 2 Standard, where stated, amend the require

36、ments of CAN/CSA-C22.2 No. 62841-1. Where a particular subclause of CAN/CSA-C22.2 No. 62841-1 is not mentioned in CAN/CSA-C22.2 No. 62841-22, the CAN/CSA-C22.2 No. 62841-1 subclause applies. This UL 62841-2-2 Standard for Safety for Electric Motor-Operated Hand-Held Tools, Transportable Tools And La

37、wn And Garden Machinery Safety Part 2-2: Particular Requirements For Hand-Held Screwdrivers And Impact Wrenches, is to be used in conjunction with the First edition of UL 62841-1. The requirements for hand-held screwdrivers and impact wrenches are contained in this Part 2 Standard and FEBRUARY 26, 2

38、016 CAN/CSA-C22.2 NO. 62841-2-2:16 UL 62841-2-2 5UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL UL 62841-1. Requirements of this Part 2 Standard, where stated, amend the requirements of UL 62841-1. Where a particular subclause of UL 62841-1

39、 is not mentioned in UL 62841-2-2, the UL 62841-1 subclause applies. Level of harmonization This standard adopts the IEC text with national differences. This standard is published as an equivalent standard for CSA Group and UL. An equivalent standard is a standard that is substantially the same in t

40、echnical content, except as follows: Technical national differences are allowed for codes and governmental regulations as well as those recognized as being in accordance with NAFTA Article 905, for example, because of fundamental climatic, geographical, technological, or infrastructural factors, sci

41、entic justication, or the level of protection that the country considers appropriate. Presentation is word for word except for editorial changes. All national differences from the IEC text are included in the CSA Group and UL versions of the standard. While the technical content is the same in each

42、organizations version, the format and presentation may differ. Reasons for Differences From IEC Differences from the IEC are being added in order to address safety and regulatory situations present in the US and Canada. Interpretations The interpretation by the standards development organization of

43、an identical or equivalent standard is based on the literal text to determine compliance with the standard in accordance with the procedural rules of the standards development organization. If more than one interpretation of the literal text has been identied, a revision is to be proposed as soon as

44、 possible to each of the standards development organizations to more accurately reect the intent. IEC Copyright For CSA Group, the text, gures, and tables of International Electrotechnical Commission Publication IEC 62841-2-2 Motor-Operated Hand-Held Tools, Transportable Tools And Lawn And Garden Ma

45、chinery Safety Part 2-2: Particular Requirements For Hand-Held Screwdrivers And Impact Wrenches, copyright 2014, are used in this standard with the consent of the International Electrotechnical Commission. The IEC Foreword is not a part of the requirements of this standard but is included for inform

46、ation purposes only. For UL, the text, gures and tables of IEC publication IEC 62841-2-2, Motor-Operated Hand-Held Tools, Transportable Tools And Lawn And Garden Machinery Safety Part 2-2: Particular Requirements For Hand-Held Screwdrivers And Impact Wrenches, copyright 2014 are used in this standar

47、d with the consent of the IEC and the American National Standards Institute (ANSI). The IEC copyrighted material has been reproduced with permission from ANSI. ANSI should be contacted regarding the reproduction of any portion of the IEC material. The IEC Foreword is not a part of the requirements o

48、f this standard but is included for information purposes only. Copies of IEC Publication IEC 62841-2-2 may be purchased from ANSI, 25 West 43rd Street, 4th Floor, New York, New York, 10036, (212) 642- 4900. FEBRUARY 26, 2016 CAN/CSA-C22.2 NO. 62841-2-2:16 UL 62841-2-2 6UL COPYRIGHTED MATERIAL NOT AU

49、THORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL NATIONAL DIFFERENCES National Differences from the text of International Electrotechnical Commission (IEC) Publication IEC 62841-2-2 (Motor-Operated Hand-Held Tools, Transportable Tools And Lawn And Garden Machinery Safety Part 2-2: Particular Requirements For Hand-Held Screwdrivers And Impact Wrenches) copyright 2014 are indicated by notati