UL 60730-2-6 (ND)-2002 National Differences For UL 60730-2-6 Standard for Automatic Electrical Controls for Household and Similar Use Part 2 Particular Requirements for Automatic E M.pdf

《UL 60730-2-6 (ND)-2002 National Differences For UL 60730-2-6 Standard for Automatic Electrical Controls for Household and Similar Use Part 2 Particular Requirements for Automatic E M.pdf》由会员分享，可在线阅读，更多相关《UL 60730-2-6 (ND)-2002 National Differences For UL 60730-2-6 Standard for Automatic Electrical Controls for Household and Similar Use Part 2 Particular Requirements for Automatic E M.pdf（10页珍藏版）》请在麦多课文档分享上搜索。

1、UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION ORDISTRIBUTION WITHOUT PERMISSION FROM ULNational Differences ForUL 60730-2-6Standard for Automatic Electrical Controls for Household and Similar Use; Part 2: ParticularRequirements for Automatic Electrical Pressure Sensing Controls Inc

2、luding MechanicalRequirementsUL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION ORDISTRIBUTION WITHOUT PERMISSION FROM ULNational Differences ForUL 60730-2-6Standard for Automatic Electrical Controls for Household and Similar Use; Part 2: ParticularRequirements for Automatic Electrical

3、Pressure Sensing Controls Including Mechanical RequirementsEdition: 1Edition Date: October 30, 2002This document provides a single listing of the National Differences included in the UL adoption ofthe corresponding IEC standard. Editorial differences appearing in the UL standard are notincluded in t

4、his technical compilation. The complete listing of National Differences is available inthe UL standard.The master for this standards document at ULs Northbrook Office is the official standards documentinsofar as it relates to a UL service and the compliance of a product with respect to the requireme

5、nts forthat product and service, or if there are questions regarding the accuracy of this document.ULs standards documents are copyrighted by UL. Neither a printed copy of a standards document, northe electronic file for a standards document should be altered in any way. All of ULs standards documen

6、tsand all copyrights, ownerships, and rights regarding those standards documents shall remain the sole andexclusive property of UL.All rights reserved. No part of this standards document may be reproduced, stored in a retrieval system,or transmitted in any form by any means, electronic, mechanical p

7、hotocopying, recording, or otherwisewithout prior permission of UL.UL provides this standards document as is without warranty of any kind, either expressed or implied,including but not limited to, the implied warranties of merchantability or fitness for any purpose.In no event will UL be liable for

8、any special, incidental, consequential, indirect or similar damages,including loss of profits, lost savings, loss of data, or any other damages arising out of the use of or theinability to use this standards document, even if UL or an authorized UL representative has been advisedof the possibility o

9、f such damage. In no event shall ULs liability for any damage ever exceed the pricepaid for this standards document, regardless of the form of the claim.UL reserves the right to change the format, presentation, file types and formats, delivery methods andformats, and the like of both its printed and

10、 electronic Standards documents without prior notice.Purchasers of the electronic versions of ULs standards documents agree to defend, indemnify, and holdUL harmless from and against any loss, expense, liability, damage, claim, or judgement (includingreasonable attorneys fees) resulting from any err

11、or or deviation introduced while purchaser is storing anelectronic standards document on the purchasers computer system.If a single-user version electronic standards document was purchased, one copy of this standardsdocument may be stored on the hard disk of a single personal computer, or on a singl

12、e LAN file-serveror the permanent storage device of a multiple-user computer, or made available through the purchasersIntranet in such a manner that this standards document may only be accessed by one user at a time andfor which there is no possibility of multiple simultaneous, concurrent access.OCT

13、OBER 30, 2002NATIONAL DIFFERENCES FOR UL 60730-2-62UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION ORDISTRIBUTION WITHOUT PERMISSION FROM ULIf a multiple-user version electronic standards document was purchased, one copy of the standardsdocument may be stored on a single LAN file-ser

14、ver, or on the permanent storage device of amultiple-user computer, or made available through the purchasers Intranet. The number of simultaneous,concurrent users shall not exceed the number of users authorized.Electronic standards documents are intended for on-line use, such as for viewing the requ

15、irements of astandards document, conducting a word search, and the like. Only one copy of the standards documentmay be printed from each single-user version of an electronic standards document. Only one copy of thestandards document may be printed for each authorized user of a multiple-user version

16、of an electronicstandards document. Because of differences in the computer/software/printer setup used by UL and thoseof electronic standards document purchasers, the printed copy obtained by a purchaser may not lookexactly like the on-line screen view or the printed standards document.An employee o

17、f an organization purchasing a UL standards document can make a copy of the page orpages being viewed for their own fair and/or practical internal use.This document provides a single listing of the National Differences included in the UL adoption ofthe corresponding IEC standard. Editorial differenc

18、es appearing in the UL standard are notincluded in this technical compilation. The complete listing of National Differences is available inthe UL standard.The master for this standards document at ULs Northbrook Office is the official standards documentinsofar as it relates to a UL service and the c

19、ompliance of a product with respect to the requirements forthat product and service, or if there are questions regarding the accuracy of this document.ULs standards documents are copyrighted by UL. Neither a printed copy of a standards document, northe electronic file for a standards document should

20、 be altered in any way. All of ULs standards documentsand all copyrights, ownerships, and rights regarding those standards documents shall remain the sole andexclusive property of UL.All rights reserved. No part of this standards document may be reproduced, stored in a retrieval system,or transmitte

21、d in any form by any means, electronic, mechanical photocopying, recording, or otherwisewithout prior permission of UL.UL provides this standards document as is without warranty of any kind, either expressed or implied,including but not limited to, the implied warranties of merchantability or fitnes

22、s for any purpose.In no event will UL be liable for any special, incidental, consequential, indirect or similar damages,including loss of profits, lost savings, loss of data, or any other damages arising out of the use of or theinability to use this standards document, even if UL or an authorized UL

23、 representative has been advisedof the possibility of such damage. In no event shall ULs liability for any damage ever exceed the pricepaid for this standards document, regardless of the form of the claim.UL reserves the right to change the format, presentation, file types and formats, delivery meth

24、ods andformats, and the like of both its printed and electronic Standards documents without prior notice.Purchasers of the electronic versions of ULs standards documents agree to defend, indemnify, and holdUL harmless from and against any loss, expense, liability, damage, claim, or judgement (includ

25、ingreasonable attorneys fees) resulting from any error or deviation introduced while purchaser is storing anelectronic standards document on the purchasers computer system.OCTOBER 30, 2002 NATIONAL DIFFERENCES FOR UL UL 60730-2-6 3UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION ORDIS

26、TRIBUTION WITHOUT PERMISSION FROM ULIf a single-user version electronic standards document was purchased, one copy of this standardsdocument may be stored on the hard disk of a single personal computer, or on a single LAN file-serveror the permanent storage device of a multiple-user computer, or mad

27、e available through the purchasersIntranet in such a manner that this standards document may only be accessed by one user at a time andfor which there is no possibility of multiple simultaneous, concurrent access.If a multiple-user version electronic standards document was purchased, one copy of the

28、 standardsdocument may be stored on a single LAN file-server, or on the permanent storage device of amultiple-user computer, or made available through the purchasers Intranet. The number of simultaneous,concurrent users shall not exceed the number of users authorized.Electronic standards documents a

29、re intended for on-line use, such as for viewing the requirements of astandards document, conducting a word search, and the like. Only one copy of the standards documentmay be printed from each single-user version of an electronic standards document. Only one copy of thestandards document may be pri

30、nted for each authorized user of a multiple-user version of an electronicstandards document. Because of differences in the computer/software/printer setup used by UL and thoseof electronic standards document purchasers, the printed copy obtained by a purchaser may not lookexactly like the on-line sc

31、reen view or the printed standards document.An employee of an organization purchasing a UL standards document can make a copy of the page orpages being viewed for their own fair and/or practical internal use.Copyright 2002 Underwriters Laboratories Inc.OCTOBER 30, 2002NATIONAL DIFFERENCES FOR UL UL

32、60730-2-64UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION ORDISTRIBUTION WITHOUT PERMISSION FROM ULPrefaceThis document provides a single listing of the technical National Differences included in the UL adoptionof the corresponding IEC standard. Editorial national differences (those

33、marked DE) are not included inthis technical compilation.In its IEC-based standards, UL uses the notations indicated below to identify national difference type, andthese types are additionally noted in this document. The standard may not use all types of thesedeviations.DR - These are deviations bas

34、ed on the National Electrical Code (NEC) and other U.S. RegulatoryRequirements.D1 - These are deviations which are based on basic safety principles and requirements, elimination ofwhich would compromise safety for U.S. consumers and users of products.D2 - These are deviations based on safety practic

35、es. These are deviations for IEC requirements that maybe acceptable, but adopting the IEC requirements would require considerable retesting or redesign on themanufacturers part.DC - These are deviations based on the component standards and will not be deleted until a particularcomponent standard is

36、harmonized with the IEC component standard.DE - These are deviations based on editorial comments or correctionsOCTOBER 30, 2002 NATIONAL DIFFERENCES FOR UL UL 60730-2-6 5UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION ORDISTRIBUTION WITHOUT PERMISSION FROM ULNational Differences2.2.1

37、04DV D2 Addition to the part 2:OPERATING CONTROL: OPERATING CONTROL denotes a control which starts or regulates theequipment during normal OPERATION.2.2.105DV D2 Addition to the part 2:PROTECTIVE CONTROL: PROTECTIVE CONTROL denotes a control the OPERATION of which is intended toreduce the risk of fi

38、re, electric shock or injury to persons during abnormal OPERATION ofthe equipment.4.4.101DV D2 Modification of 4.4.101 of the part 2 by adding the following note:NOTE In the U.S.A., the number of cycles specified in Annex AA apply for independently mounted,integrated and incorporated pressure contro

39、ls.Table 7.2DV D2 Replacement of Table 7.2 of the part 2:Table 7.2DVRequirement Information Clause or subclause MethodModification:Replace the following items by:6 Purpose of control 2.2.101 to 2.2.103,4.3.5, 6.3D26 Number of cycles of ACTUATION (M) for eachMANUAL ACTION101A)6.10, Annex AA X27 Numbe

40、r of automatic cycles (A) for eachAUTOMATIC ACTION101A)6.11, Annex AA X34 Not applicable37 See additional notes102A), 103A)4, 15, 17 X44 Not applicable48 Operating pressure104A)2.3.11 D(or pressures) 15Additional items: 18101 PRESSURE MEDIUM 2.3.101 X102 OPERATING DIFFERENTIAL 2.3.26 D103 MAXIMUM WO

41、RKING PRESSURE 2.3.29 D104A A low voltage (0 30 volt) cut-out to be wiredwith NEC Class 1 wiring methodsD105A Date code of manufacturing for INDEPENDENTLYMOUNTED CONTROLS105A)CAdditional notes:101A)The minimum number of cycles for independently mounted, integrated and INCORPORATED CONTROLS are indic

42、ated inAnnex AA.102A)For Type 2 controls, the required deviations and DRIFT tolerances are indicated in Table AA.101DV.103A)Deviation and DRIFT applies to a SPDT cutout terminal which is de-energized on pressure rise.OCTOBER 30, 2002NATIONAL DIFFERENCES FOR UL UL 60730-2-66Table 7.2DV Continued on N

43、ext PageUL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION ORDISTRIBUTION WITHOUT PERMISSION FROM ULTable 7.2DV ContinuedRequirement Information Clause or subclause Method104A)In the U.S.A., the marking method is C for INDEPENDENTLY MOUNTED CONTROLS.105A)The date code shall be the date

44、or other dating period of manufacture not exceeding any three consecutivemonths. The date of manufacture may be abbreviated; or may be in a nationally accepted conventional code or in acode affirmed by the manufacturer, provided that the code:a) Does not repeat in less than 20 years, andb) Does not

45、require reference to the product records of the manufacturer to determine when the product wasmanufactured.9.4.2DV D2 Modification of 9.4.2 of the UL part 1 by adding the following:A test for resistance to corrosion is not under consideration for controls covered by this Standard.11.6.101DV D2 Addit

46、ion to the part 2:If the function or calibration of the control is affected by being placed out of level, thecontrol shall be provided with a leveling indicator such as a bubble, pendulum, or ahorizontal or vertical line. When attached as intended, the control shall resist a torque of11,3 Nm (8,5 lb

47、fft) without moving.11.6.102DV D2 Addition to the part 2:If a control requires a mounting bracket to conform to this standard, the bracket shall befurnished with the control. The bracket shall be marked with a part number and its useshall be indicated on the control. This marking may be placed insid

48、e the control COVER.11.11.104DV D2 Addition of 11.11.104DV.1 11.11.104DV.10 to the part 2:11.11.104DV.1 After being subjected to the conditions described in 11.11.104DV.2 11.11.104DV.4, a brass part containing more than 15 percent zinc shall show no evidenceof cracking when examined using 25X magnif

49、ication.11.11.104DV.2 Each test sample is to be subjected to the physical stresses normallyimposed on or within a part as the result of assembly with other components. Suchstresses are to be applied to the sample prior to and maintained during the test. Sampleswith threads, intended to be used for installing the product in the field, are to have thethreads engaged and tightened to the torque specified in Table 11.11.104DV.2.1. Teflontape or pipe compound are not to be used on the threads.Table 11.11.104DV.2.1 D2 Addition to the part 2:OCTOBER 30, 2002