UL 60730-2-14 (ND)-2002 National Differences For UL 60730-2-14 Automatic Electrical Controls for Household and Similar Use Part 2 Particular Requirements for Electric Actuators (Fi.pdf

《UL 60730-2-14 (ND)-2002 National Differences For UL 60730-2-14 Automatic Electrical Controls for Household and Similar Use Part 2 Particular Requirements for Electric Actuators (Fi.pdf》由会员分享，可在线阅读，更多相关《UL 60730-2-14 (ND)-2002 National Differences For UL 60730-2-14 Automatic Electrical Controls for Household and Similar Use Part 2 Particular Requirements for Electric Actuators (Fi.pdf（8页珍藏版）》请在麦多课文档分享上搜索。

1、UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION ORDISTRIBUTION WITHOUT PERMISSION FROM ULNational Differences ForUL 60730-2-14Automatic Electrical Controls for Household and Similar Use; Part 2: Particular Requirements forElectric ActuatorsUL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR F

2、URTHER REPRODUCTION ORDISTRIBUTION WITHOUT PERMISSION FROM ULNational Differences ForUL 60730-2-14Automatic Electrical Controls for Household and Similar Use; Part 2: Particular Requirements forElectric ActuatorsEdition: 1Edition Date: February 5, 2002This document provides a single listing of the N

3、ational Differences included in the UL adoption ofthe corresponding IEC standard. Editorial differences appearing in the UL standard are notincluded in this technical compilation. The complete listing of National Differences is available inthe UL standard.The master for this standards document at UL

4、s Northbrook Office is the official standards documentinsofar as it relates to a UL service and the compliance of a product with respect to the requirements forthat product and service, or if there are questions regarding the accuracy of this document.ULs standards documents are copyrighted by UL. N

5、either a printed copy of a standards document, northe electronic file for a standards document should be altered in any way. All of ULs standards documentsand all copyrights, ownerships, and rights regarding those standards documents shall remain the sole andexclusive property of UL.All rights reser

6、ved. No part of this standards document may be reproduced, stored in a retrieval system,or transmitted in any form by any means, electronic, mechanical photocopying, recording, or otherwisewithout prior permission of UL.UL provides this standards document as is without warranty of any kind, either e

7、xpressed or implied,including but not limited to, the implied warranties of merchantability or fitness for any purpose.In no event will UL be liable for any special, incidental, consequential, indirect or similar damages,including loss of profits, lost savings, loss of data, or any other damages ari

8、sing out of the use of or theinability to use this standards document, even if UL or an authorized UL representative has been advisedof the possibility of such damage. In no event shall ULs liability for any damage ever exceed the pricepaid for this standards document, regardless of the form of the

9、claim.UL reserves the right to change the format, presentation, file types and formats, delivery methods andformats, and the like of both its printed and electronic Standards documents without prior notice.Purchasers of the electronic versions of ULs standards documents agree to defend, indemnify, a

10、nd holdUL harmless from and against any loss, expense, liability, damage, claim, or judgement (includingreasonable attorneys fees) resulting from any error or deviation introduced while purchaser is storing anelectronic standards document on the purchasers computer system.If a single-user version el

11、ectronic standards document was purchased, one copy of this standardsdocument may be stored on the hard disk of a single personal computer, or on a single LAN file-serveror the permanent storage device of a multiple-user computer, or made available through the purchasersIntranet in such a manner tha

12、t this standards document may only be accessed by one user at a time andfor which there is no possibility of multiple simultaneous, concurrent access.FEBRUARY 5, 2002NATIONAL DIFFERENCES FOR UL 60730-2-142UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION ORDISTRIBUTION WITHOUT PERMISSI

13、ON FROM ULIf a multiple-user version electronic standards document was purchased, one copy of the standardsdocument may be stored on a single LAN file-server, or on the permanent storage device of amultiple-user computer, or made available through the purchasers Intranet. The number of simultaneous,

14、concurrent users shall not exceed the number of users authorized.Electronic standards documents are intended for on-line use, such as for viewing the requirements of astandards document, conducting a word search, and the like. Only one copy of the standards documentmay be printed from each single-us

15、er version of an electronic standards document. Only one copy of thestandards document may be printed for each authorized user of a multiple-user version of an electronicstandards document. Because of differences in the computer/software/printer setup used by UL and thoseof electronic standards docu

16、ment purchasers, the printed copy obtained by a purchaser may not lookexactly like the on-line screen view or the printed standards document.An employee of an organization purchasing a UL standards document can make a copy of the page orpages being viewed for their own fair and/or practical internal

17、 use.This document provides a single listing of the National Differences included in the UL adoption ofthe corresponding IEC standard. Editorial differences appearing in the UL standard are notincluded in this technical compilation. The complete listing of National Differences is available inthe UL

18、standard.The master for this standards document at ULs Northbrook Office is the official standards documentinsofar as it relates to a UL service and the compliance of a product with respect to the requirements forthat product and service, or if there are questions regarding the accuracy of this docu

19、ment.ULs standards documents are copyrighted by UL. Neither a printed copy of a standards document, northe electronic file for a standards document should be altered in any way. All of ULs standards documentsand all copyrights, ownerships, and rights regarding those standards documents shall remain

20、the sole andexclusive property of UL.All rights reserved. No part of this standards document may be reproduced, stored in a retrieval system,or transmitted in any form by any means, electronic, mechanical photocopying, recording, or otherwisewithout prior permission of UL.UL provides this standards

21、document as is without warranty of any kind, either expressed or implied,including but not limited to, the implied warranties of merchantability or fitness for any purpose.In no event will UL be liable for any special, incidental, consequential, indirect or similar damages,including loss of profits,

22、 lost savings, loss of data, or any other damages arising out of the use of or theinability to use this standards document, even if UL or an authorized UL representative has been advisedof the possibility of such damage. In no event shall ULs liability for any damage ever exceed the pricepaid for th

23、is standards document, regardless of the form of the claim.UL reserves the right to change the format, presentation, file types and formats, delivery methods andformats, and the like of both its printed and electronic Standards documents without prior notice.Purchasers of the electronic versions of

24、ULs standards documents agree to defend, indemnify, and holdUL harmless from and against any loss, expense, liability, damage, claim, or judgement (includingreasonable attorneys fees) resulting from any error or deviation introduced while purchaser is storing anelectronic standards document on the p

25、urchasers computer system.FEBRUARY 5, 2002 NATIONAL DIFFERENCES FOR UL UL 60730-2-14 3UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION ORDISTRIBUTION WITHOUT PERMISSION FROM ULIf a single-user version electronic standards document was purchased, one copy of this standardsdocument may

26、be stored on the hard disk of a single personal computer, or on a single LAN file-serveror the permanent storage device of a multiple-user computer, or made available through the purchasersIntranet in such a manner that this standards document may only be accessed by one user at a time andfor which

27、there is no possibility of multiple simultaneous, concurrent access.If a multiple-user version electronic standards document was purchased, one copy of the standardsdocument may be stored on a single LAN file-server, or on the permanent storage device of amultiple-user computer, or made available th

28、rough the purchasers Intranet. The number of simultaneous,concurrent users shall not exceed the number of users authorized.Electronic standards documents are intended for on-line use, such as for viewing the requirements of astandards document, conducting a word search, and the like. Only one copy o

29、f the standards documentmay be printed from each single-user version of an electronic standards document. Only one copy of thestandards document may be printed for each authorized user of a multiple-user version of an electronicstandards document. Because of differences in the computer/software/prin

30、ter setup used by UL and thoseof electronic standards document purchasers, the printed copy obtained by a purchaser may not lookexactly like the on-line screen view or the printed standards document.An employee of an organization purchasing a UL standards document can make a copy of the page orpages

31、 being viewed for their own fair and/or practical internal use.Copyright 2002 Underwriters Laboratories Inc.FEBRUARY 5, 2002NATIONAL DIFFERENCES FOR UL UL 60730-2-144UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION ORDISTRIBUTION WITHOUT PERMISSION FROM ULPrefaceThis document provides

32、 a single listing of the technical National Differences included in the UL adoptionof the corresponding IEC standard. Editorial national differences (those marked DE) are not included inthis technical compilation.In its IEC-based standards, UL uses the notations indicated below to identify national

33、difference type, andthese types are additionally noted in this document. The standard may not use all types of thesedeviations.DR - These are deviations based on the National Electrical Code (NEC) and other U.S. RegulatoryRequirements.D1 - These are deviations which are based on basic safety princip

34、les and requirements, elimination ofwhich would compromise safety for U.S. consumers and users of products.D2 - These are deviations based on safety practices. These are deviations for IEC requirements that maybe acceptable, but adopting the IEC requirements would require considerable retesting or r

35、edesign on themanufacturers part.DC - These are deviations based on the component standards and will not be deleted until a particularcomponent standard is harmonized with the IEC component standard.DE - These are deviations based on editorial comments or correctionsFEBRUARY 5, 2002 NATIONAL DIFFERE

36、NCES FOR UL UL 60730-2-14 5UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION ORDISTRIBUTION WITHOUT PERMISSION FROM ULNational DifferencesTable 7.2DV D2 Replacement of Table 7.2 of the part 2:Table 7.2DVInformationClause orsubclause Method7 The type of load controlled by each external

37、circuit102)6.2 D1422 Temperature limits of the actuator, if Tminlower than 0C or Tmaxother than 60C6.7, 14.5, 14.7, 17.3 D23 Temperature limits of mounting surfaces (TS) 6.12.2, 14.1, 17.3 D27 Number of automatic cycles (A) for each AUTOMATIC ACTION103)6.11 X28 Not applicable34 Details of any limita

38、tion of OPERATING TIME101) 104)14, 17 C37 Not applicable38 Not applicable43 Not applicable44 Not applicable47 Not applicable101 Impedance protected motor102)14.4.101 D102 Thermally protected motor102)14.4.102 D103 Type of movement 2.3.104 D2.3.1056.4.102104 Type of action 2.3.101 D2.3.1026.4.101105

39、Maximum rated mechanical load 15.5.102 D106 TRAVEL TIME 2.3.103 D15.5.10115.5.102107 STROKE 2.3.104 D108 ANGULAR ROTATION 2.3.105 D109 Response time and method of measurement (For type 1.AA ortype 2.AA)6.4.3.101 D15.5.102110 Lower percentage of RATED VOLTAGE (for type 1.AB or 2.AB) 6.4.3.102 D111 Da

40、te code for INDEPENDENTLY MOUNTED CONTROLS105)101)This may be given as a maximum percentage of ON time of the power supply to avoid overheating of the windingsin a declared period of time.102)In the USA, for independently mounted actuators, the marking method is C.103)ELECTRIC ACTUATORS are subjecte

41、d to a minimum of 6 000 cycles.104)For integrated and incorporated ELECTRIC ACTUATORS, the method is D.105)The date code shall be the date or other dating period of manufacture not exceeding any three consecutivemonths. The date of manufacture may be abbreviated; or may be in a nationally accepted c

42、onventional code or in acode affirmed by the manufacturer, provided that the code:a) Does not repeat in less than 20 years, andFEBRUARY 5, 2002NATIONAL DIFFERENCES FOR UL UL 60730-2-146Table 7.2DV Continued on Next PageUL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION ORDISTRIBUTION WI

43、THOUT PERMISSION FROM ULTable 7.2DV ContinuedInformationClause orsubclause Methodb) Does not require reference to the product records of the manufacturer to determine when the product wasmanufactured.17.2.3.1DV D2 Modification of 17.2.3.1 of the UL part 1 by adding the following:208 V for controls rated at any voltage between 200 to 208 voltsFEBRUARY 5, 2002 NATIONAL DIFFERENCES FOR UL UL 60730-2-14 7UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION ORDISTRIBUTION WITHOUT PERMISSION FROM ULFEBRUARY 5, 2002NATIONAL DIFFERENCES FOR UL UL 60730-2-148No Text on This Page