UL 1130-1999 UL Standard for Safety Mechanically and Electrically Operated Fuel Pumps for Marine Use《船用机械和电子控制燃油泵》.pdf

《UL 1130-1999 UL Standard for Safety Mechanically and Electrically Operated Fuel Pumps for Marine Use《船用机械和电子控制燃油泵》.pdf》由会员分享，可在线阅读，更多相关《UL 1130-1999 UL Standard for Safety Mechanically and Electrically Operated Fuel Pumps for Marine Use《船用机械和电子控制燃油泵》.pdf（26页珍藏版）》请在麦多课文档分享上搜索。

1、 STD-UL 1130-ENGL 1777 W 7275775 0782873 72I H Underwriters laboratories Inca Northbrook, Illinois (847) 272-8800 Melville, New York- (516) 271-6200 Santa Clara, California (408) 985-24130 Research Triangle Park, North Carolina * (919) 549-1400 Camas, Washington* (360) 817-5500 Underwriters Laborato

2、ries Inc., founded in 1894, is chartered as a not-for-profit organization without capital stock, under the laws of the State of Delaware, to establish, maintain, and operate laboratories for the examination and testing of devices, systems and materials to determine their relation to hazards to life

3、and property, and to ascertain, define and publish standards, classifications and specifications for materials, devices, products, equipment, constructions, methods, and systems affecting such hazards. UL Standards for Safety are developed under a procedure which provides for participation and comme

4、nt from the affected public as well as industry. The procedure takes into consideration a survey of known existing standards and the needs and opinions of a wide variety of interests concerned with the subject matter of the standard. Thus manufacturers, consumers, individuals associated with consume

5、r-oriented organizations, academicians, government officials, industrial and commercial users, inspection authorities, insurance interests and others provide input to UL in the formulating of UL Standards for Safety, to keep them consonant with social and technological advances. A not-for-profit org

6、anization dedicated to public safety and committed to quality service STD-UL 1130-ENGL 1977 m 7275775 0782894 bbO m MARCH 1,1999 - UL 1130 tr 1 Underwriters Laboratories Inc. (UL) 333 Pfingsten Road Northbrook, IL 60062-2096 UL Standard for Safety for Mechanically and Electrically Operated Fuel Pump

7、s for Marine Use, UL 1130 Second Edition, Dated March 1, 1999 The master for this Standard at ULs Northbrook Office is the official document insofar as it relates to a UL service and the compliance of a product with respect to the requirements for that product and service, or if there are questions

8、regarding the accuracy of this Standard. ULs Standards for Safety are copyrighted by UL. Neither a printed copy of a Standard, nor the distribution diskette for a Standard-on-Diskette and the file for the Standard on the distribution diskette should be altered in any way. All of ULs Standards and al

9、l copyrights, ownerships, and rights regarding those Standards shall remain the sole and exclusive property of UL. All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form by any means, electronic, mechanical photocopying, recording

10、, or otherwise without prior permission of UL. Revisions of UL Standards for Safety are issued from time to time. A UL Standard for Safety is current only if it incorporates the most recently adopted revisions. UL provides this Standard “as is“ without warranty of any kind, either expressed or impli

11、ed, including but not limited to, the implied warranties of merchantability or fitness for any purpose. In no event will UL be liable for any special, incidental, consequential, indirect or similar damages, including loss of profits, lost savings, loss of data, or any other damages arising out of th

12、e use of or the inability to use this Standard, even if UL or an authorized UL representative has been advised of the possibility of such damage. In no event shall ULs liability for any damage ever exceed the price paid for this Standard, regardless of the form of the claim. UL will attempt to answe

13、r support requests concerning WordPerfect, Envoy, and Standards-on-Diskette. However, this support service is offered on a reasonable efforts basis only, and UL may not be able to resolve every support request. UL supports a Standards-on-Diskette only if it is used under the conditions and operating

14、 systems for which it is intended. ULs support policies may change from time-to-time without notification. UL reserves the right to change the format, presentation, file types and formats, delivery methods and formats, and the like of both its printed and electronic Standards without prior notice. S

15、tandards-on-Diskette purchasers agree to defend, indemnify, and hold UL harmless from and against any loss, expense, liability, damage, claim, or judgement (including reasonable attorneys fees) resulting from any error or deviation introduced while purchaser is storing a Standard-on-Diskette on the

16、purchasers computer system. If a single-user version Standards-on-Diskette was purchased, one copy of this Standard may be stored on the hard disk of a single personal computer, or on a single LAN file-server or the permanent storage device of a multiple-user computer in such a manner that this Stan

17、dard may only be accessed by one user at a time and for which there is no possibility of multiple concurrent access. The original distribution diskette should be stored in a safe place. - STD-UL LL3O-ENGL 1777 7275795 0782875 5T7 tr2 MARCH 1.1999 - UL 1130 If a multiple-user version Standards-on-Dis

18、kette was purchased, one copy of the Standard may be stored on a single LAN file-server, or on the permanent storage device of a multiple-user computer. The number of concurrent users shall not exceed the number of users authorized for the Standards-on-Diskette version. The original distribution dis

19、kette should be stored in a safe place. Standards-on-Diskette are intended for on-line use, such as for viewing the requirements of a Standard, conducting a word search, and the like. Only one copy of the Standard may be printed from each single-user version of a Standards-on-Diskette. Only one copy

20、 of the Standard may be printed for each authorized user of a multiple-user version of a Standards-on-Diskette. An employee of an organization purchasing a Standard-on-Diskette can make a copy of the page or pages being viewed for their own fair and/or practical internal use. Because of differences

21、in the computer/software/printer setup used by UL and those of Standards-on-Diskette purchasers, the printed copy obtained by a purchaser may not look exactly like the on-line screen view or the printed Standard. The requirements in this Standard are now in effect, except for those paragraphs, secti

22、ons, tables, figures, and/or other elements of the Standard having future effective dates as indicated in the note following the affected item. The prior text for requirements that have been revised and that have a future effective date are located after the Standard, and are preceded by a “SUPERSED

23、ED REQUIREMENTS notice. New product submittals made prior to a specified future effective date will be judged under all of the requirements in this Standard including those requirements with a specified future effective date, unless the applicant specifically requests that the product be judged unde

24、r the current requirements. However, if the applicant elects this option, it should be noted that compliance with all the requirements in this Standard will be required as a condition of continued Listing and Follow-Up Services after the effective date, and understanding of this should be signified

25、in writing. Copyright O 1999 Underwriters Laboratories Inc. This Standard consists of pages dated as shown in the following checklist: Page Date 1-20 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

26、. March 1, 1999 STD-UL 1130-ENGL 1777 W 7275775 078287b 433 W MARCH 1,1999 1 UL 1130 Standard for Mechanically and Electrically Operated Fuel Pumps for Marine Use First Edition - October, 1990 Second Edition March 1, 1999 An effective date included as a note immediately following certain requirement

27、s is one established by Underwriters Laboratories Inc. Revisions of this Standard will be made by issuing revised or additional pages bearing their date of issue. A UL Standard is current only if it incorporates the most recently adopted revisions, all of which are itemized on the transmittal notice

28、 that accompanies the latest set of revised requirements. ISBN 0-7629-0269-8 COPYRIGHT O 1990,1999 UNDERWRITERS LABORATORIES INC. STD-UL 1130-ENGL 1999 W 9275795 0782897 37T D 2 UL 1130 MARCH 1,1999 No Text on This Page . STD-UL LL30-ENGL 1777 7275775 0782878 20b MARCH 1. 1999 UL 1130 3 CONTENTS FOR

29、EWORD 4 INTRODUCTION 1 Scope . 5 2 Glossary . 5 3 Units of Measurement . 6 4 Components 6 CONSTRUCTION 5 General 7 6 Electric Fuel Pumps . 7 7 Nonmetallic Materials 8 8 Internal Wiring 8 9 Field Power Supply Connections 8 10 Strain Relief . 9 11 insulating Material . 9 12 Motor Protection . 9 PERFOR

30、MANCE 13 General 10 14 Salt Spray Corrosion Test . 10 15 Vibration Test 11 16 ShockTest . 11 17 Temperature Test . 11 18 Stray Current Leakage Test 12 19 Materiais Test 12 19.1 immersion . 12 19.2 Accelerated aging 13 20 Fuse Protection Test 13 21 Locked Rotor Test 13 22 Ignition Protection Test 14

31、23 Operation Test . 14 24 10-Day Moist Ammonia Air Stress Cracking Test . 14 25 Fire and Thermal Shock Test 15 26 Strain Relief Test . 16 MARKING 27 General 17 OPERATING AND INSTALLATION INSTRUCTIONS 28 General 18 STD-UL LL30-ENGL 1779 9275795 0782877 1112 4 UL 1130 MARCH 1.1999 FOREWORD A. This Sta

32、ndard contains basic requirements for products covered by Underwriters Laboratories Inc. (UL) under its Follow-Up Service for this category within the limitations given below and in the Scope section of this Standard. These requirements are based upon sound engineering principles, research, records

33、of tests and field experience, and an appreciation of the problems of manufacture, installation, and use derived from consultation with and information obtained from manufacturers, users, inspection authorities, and others having specialized experience. They are subject to revision as further experi

34、ence and investigation may show is necessary or desirable. B. The observance of the requirements of this Standard by a manufacturer is one of the conditions of the continued coverage of the manufacturers product. C. A product which complies with the text of this Standard will not necessarily be judg

35、ed to comply with the Standard if, when examined and tested, it is found to have other features which impair the level of safety contemplated by these requirements. D. A product employing materials or having forms of construction which conflict with specific requirements of the Standard cannot be ju

36、dged to comply with the Standard. A product employing materials or having forms of construction not addressed by this Standard may be examined and tested according to the intent of the requirements and, if found to meet the intent of this Standard, may be judged to comply with the Standard. E. UL, i

37、n performing its functions in accordance with its objectives, does not assume or undertake to discharge any responsibility of the manufacturer or any other party. The opinions and findings of UL represent its professional judgment given with due consideration to the necessary limitations of practica

38、l operation and state of the art at the time the Standard is processed. UL shall not be responsible to anyone for the use of or reliance upon this Standard by anyone. UL shall not incur any obligation or liability for damages, including consequential damages, arising out of or in connection with the

39、 use, interpretation of, or reliance upon this Standard. F. Many tests required by the Standards of UL are inherently hazardous and adequate safeguards for personnel and property shall be employed in conducting such tests. STD-UL 1130-ENGL 1799 W 7275795 0782900 774 MARCH 1.1999 UL 1130 5 INTRODUCTI

40、ON 1 Scope 1.1 The requirements in this standard apply to the construction and performance characteristics of fuel pumps intended for marine use that are: a) Mechanically operated; or b) Electrically operated and rated 50 volts dc or less, and that are intended for use on recreational boats. The sta

41、ndard covers both independently mounted pumps and integrally mounted pumps used with engines or accessory devices. The standard also addresses pumps used to transfer fuel between tanks. Pumps covered by this Standard may be used with gasoline, diesel fuel, or both. 1.2 The requirements also cover ac

42、cessories such as oil pressure switches, if provided, for use with the pump. 1.3 The pumps covered by these requirements are intended for installation and use in accordance with the applicable requirements of the US. Coast Guard (as specified in 33 CFR 183 Subpart J - Fuel Systems and 33 CFR 183 Sub

43、part I - Electrical Systems), the standards of the American Boat and Yacht Council, Inc., and the Standard for Fire Protection of Pleasure and Commercial Motorcraft, NFPA 302. 1.4 These requirements do not cover mechanically or electrically operated marine fuel pumps intended for use in hazardous lo

44、cations as defined in the United States Coast Guard Electrical Engineering Regulations. See 46 CFR Section 11 1.105-1. 1.5 These requirements cover ignition-protected pumps (for use with gasoline) that may be required on boats under 65 feet (19.8 m) in length. Pumps for use with diesel fuel are not

45、required to be ignition protected. 1.6 A product that contains features, characteristics, components, materials, or systems new or different from those covered by the requirements in this standard, and that involves a risk of fire, electric shock, or injury to persons shall be evaluated using the ap

46、propriate additional component and end-product requirements as determined necessary to maintain the acceptable level of safety as originally anticipated by the intent of this standard. A product whose features, characteristics, components, materials, or systems conflict with specific requirements or

47、 provisions of this standard cannot be judged to comply with this standard. Where considered appropriate, revision of requirements shall be proposed and adopted in conformance with the methods employed for development, revision, and implementation of this standard. 2 Glossary 2.1 For the purpose of

48、this standard, the following definitions apply. 2.2 FUEL TRANSFER PUMP - A pump intended to transfer fuel between tanks. 2.3 IGNITION-PROTECTED - Constructed so that: a) A flammable hydrocarbon mixture surrounding the device will not be ignited if a normally occurring electrical arc, spark, or heat

49、source ignites a flammable hydrocarbon mixture inside the device: STD*UL 1130-ENGL 1777 7275775 0782901 b20 6 UL 1130 MARCH 1,1999 b) The electrical arc, spark, or heat source inside the device has insufficient energy to ignite the flammable mixture; or c) The source of ignition is hermetically sealed from the surrounding mixture. An ignition-protected device does not necessarily comply with the requirements for an explosion-proof device. See 1.4. 2.4 PUMP - All mechanically or electrically operated fuel pumps. Refer t